Influence of compounding conditions,treatment of wood particles with fire-retardants and artificial weathering on properties of wood-polymer composites for façade applications

European Journal of Wood and Wood Products - Various fire-retardants (FR) for the pre-treatment of wood flour, for example, ammonium polyphosphate and different formulations based on phosphorus-...     

Characterization of Ceramic Foam Filters Used for Liquid Metal Filtration

In the current study, the morphology including tortuosity, and the permeability of 50-mm thick commercially available 30, 40, 50, and 80 pores per inch (PPI) alumina ceramic foam filters (CFFs) have been investigated. Measurements have been taken of cell (pore), window, and strut sizes, porosity, tortuosity, and liquid permeability. Water velocities from ~0.015 to 0.77 m/s have been used to derive both first-order (Darcy) and second-order (Non-Darcy) terms for being used with the Forchheimer equation. Measurements were made using 49-mm “straight through” and 101-mm diameter “expanding flow field” designs. Results from the two designs are compared with calculations made using COMSOL 4.2a^® 2D axial symmetric finite element modeling (FEM), as a function of velocity and filter PPI. Permeability results are correlated using directly measurable parameters and compared with the previously published results. Development of improved wall sealing (49 mm) and elimination of wall effects (101 mm) have led to a high level of agreement between experimental, analytic, and FEM methods (±0 to 7 pct on predicted pressure drop) for both types of experiments. Tortuosity has been determined by two inductive methods, one using cold-solidified samples at 60 kHz and the other using liquid metal at 50 Hz, giving comparable results.     

Sintering,microwave properties,and circulator applications of textured Sc-substituted M-type ferrite thick films

Sc³⁺ substituted M-type ferrites are effective microwave magnetic materials with a ferromagnetic resonance frequency in the range of 20 GHz–50 GHz. We report on the fabrication of oriented ferrite thick films as microwave components for application in the K_a-band at 30 GHz. Films of BaFe_11.5.Sc_0.5O₁₉ were prepared by screen-printing on alumina substrates, drying in an external magnetic field, and sintering at 900 °C. Low-temperature sintering is achieved through use of a mixed BBSZ/CuO sintering aid. A strong anisotropy of the sintered ferrite films is revealed by XRD analysis. Microwave properties of the films were determined in a coplanar waveguide setup. The ferromagnetic resonance frequency of the films is at 30 GHz and the textured films possess good nonreciprocal properties which scale with film thickness. The films were tested in a Y-junction circulator, and represent promising materials for self-biased microwave components fabricated in thick film technology.     

Spectrally selective and adaptive surfaces for protection against radiative heating: ITO and VO2

Two surface materials for reducing absorptivity of heat radiation from fires have been investigated. The first is VO₂, which is a thermochromic material. When the temperature of a VO₂ surface increases over a certain temperature, it switches, ideally, from infrared (IR)‐absorbing to IR‐reflecting. VO₂ window coatings are still on a research level, yet to be commercialized. In this study, VO₂ powder available on the market was investigated. The thermochromic effect could be identified but was not large enough to significantly improve the fire properties of treated surfaces. Some thoughts concerning how to improve the performance of VO₂ are discussed. The second investigated material is indium tin oxide (ITO), which is a so called low‐e coating, which means that it has low emissivity and absorptivity in the IR part of the spectrum. ITO is spectrally selective in the sense that it transmits visible light while reflecting a large fraction of the IR radiation, which is a rare property for surfaces in general but a typical property of thin electrically conducting non‐metallic films. It is shown that the application of ITO to poly(methyl methacrylate) (PMMA) significantly improves its fire properties. ITO coating is a mature technology already in widespread use today in the electronics industry. Copyright © 2012 John Wiley & Sons, Ltd.     

The effect of climate variations on glulam—an experimental study

Climate variations affect timber structures by causing moisture induced stresses which may lead to cracks in timber members. The paper presents experimentally determined moisture induced stresses that arise perpendicular to the grain of glulam specimens during exposure to 1-dimensional drying and wetting. Although to a certain extent reduced by creep effects, the determined tensile stresses can significantly exceed the characteristic tensile strength of glulam. Additional measurements of moduli of elasticity (E) and hygroexpansion coefficients (α) revealed that these parameters are strongly affected by the geometrical configuration (pith locations) of the specimens. By means of all the parameters determined here, it can be avoided that parameters have to be selected from different literature sources, which introduces large uncertainties into the numerical simulations.     

Thermobaric stratification in very deep Norwegian freshwater lakes

Thermobaric stratification was investigated in very deep lakes of elongated shape. We considered the spring time configuration when large freshwater lakes may have their deepest recirculation. In five very deep freshwater lakes in Norway, profiles were measured in spring 2006 with multiparameter probes. Temperature profiles confirmed thermobaric stratification in all of these lakes, i.e. the temperature profiles crossed the 4 °C line and thus were affected by pressure effects on the temperature of maximum density. Electrical conductance was low in all of the investigated lakes, and vertical gradients were too small to play a role in the density stratification. In all lakes, deep water was well supplied with oxygen. Three out of five lakes showed a temperature gradient close to Eklund's stability theorem. However, the remaining two lakes clearly opposed the theorem. Bottom temperatures were more closely related to lake length than their maximum depths. Oxygen saturation profiles documented recent intensive gas exchange with the atmosphere. They agree well with the possible formation of deep water from density driven flows at horizontal temperature gradients close to 4 °C.