Isolation of single yeast cells by optical trapping

Individual yeast cells can be successfully isolated and recultured on plates with a new isolation method making use of optical trapping with infrared laser light. The cells can be selected on morphological criteria by high resolution microscopy. The isolation device is constructed from two coverslips separated by spacers, in which selected cells are transferred to a plastic capillary, using the optical trap. To test the procedure, selection experiments were done with a mixture of two Saccharomyces cerevisiae strains, distinguishable both in fluorescence microscopy and on agar plates. These experiments showed that only selected cells were isolated, and close to 100% of the isolated stationary-phase cells formed colonies on agar plates, indicating a high recovery. A lower recovery was obtained with exponential-phase cells, possibly because of a higher sensitivity to laser irradiation. Applications for this method may include the isolation of mutants with altered morphology and the isolation of subpopulations of yeast cultures, for their separate investigation or for the initiation of pure cultures.     

Adaptive covariate acquisition for minimizing total cost of classification

Machine Learning - In some applications, acquiring covariates comes at a cost which is not negligible. For example in the medical domain, in order to classify whether a patient has diabetes or not,...     

Interaction Between a Linearly Polarized Electromagnetic Plane and a Double Spherical Shell

An exact solution inside, outside, and within two arbitrary concentric spherical shells is presented for an impinging monochromatic linearly polarized electromagnetic wave. Specifically, the solution was found for a double-shell spherical acrylic plastic enclosure irradiated with 2450-MHz microwaves. The enclosure is used as an environmentally controlled exposure chamber for experimental animals during microwave irradiation. The analysis shows that an air foamed material, such as styrofoam, would be a better material than either Plexiglas or Teflon, provided it is sufficiently durable.     

Carbon Aerogels as Electrode Material in Supercapacitors

Due to their large specific surface area and their high electrical conductivity carbon aerogels are promising materials for electrodes in electrochemical double-layer capacitors (supercapacitor). The carbon aerogels were made via pyrolysis of resorcinol formaldehyde aerogels. The latter were prepared by supercritical and subcritical drying as well. The important findings of our investigation were, that the highest capacities of 46 F/cm³ were measured for samples with a density of about 800 kg/m³ pyrolyzed at 800°C. Also it was shown that RF-gels with molar resorcinol/catalyst ratios 1000 or higher can be dried subcritically without cracking or significant shrinkage. Carbon aerogels derived from these RF-aerogels have a small mesopore surface area, however an especially large micropore area. They provide electrical capacities which are most suitable for their use in supercapacitors.     

NMR chemical shift reagents in structural determination of lipid derivatives: IV. Methylcis- andtrans-9,10-epoxystearate and methylerythro- andthreo-9,10-dihydroxystearate

Chemical shift reagents were used to expand the amount of structural information obtainable from NMR studies of derivatives of methyl oleate and elaidate:methylcis-9,10-epoxystearate, methyltrans-9,10-epoxystearate, methyl erythro-9,10-dihydroxystearate, and methyl threo-9,10-dihydroxystearate. Chemical shift reagent studies of methyltrans-9,10-epoxystearate and methyl threo-9,10-dihydroxystearate afforded the most information. Chemical shift reagent studies of methylcis-9,10-epoxystearate and methyl erythro-9,10-dihydroxystearate were decidedly inferior. The series of complementary interpretive techniques previously developed during chemical shift reagent studies of monofunctional fatty esters and model polyfunctional fatty esters were found to be applicable in the current study. However, to avoid ambiguity in several proton assignments, supplementary spin decoupling experiments were necessary.     

Esters of hydroxystearic acids as primary low-temperature plasticizers for a vinyl chloride—Vinyl acetate copolymer

Summary Thirty-one acyloxy or aryloxy esters prepared from hydroxystearic acids have been evaluated as plasticizers for a vinyl chloride-vinyl acetate copolymer (95∶5). Many of them were found to be primary plasticizers, having outstanding low-temperature performance when employed at the 35% level. Formulations with these compounds compared quite favorably in tensile properties with those containing the di-2-ethylhexyl esters of phthalic, sebacic, azelaic, and adipic acids. Volatility losses were similar to those of the four di-2-ethylhexyl esters. The loss of plasticizer through migration was equal to or less than that from compositions containing the esters of sebacic, azelaic, and adipic acids but was greater than that of the phthalate ester. A mechanistic scheme of plasticizer-polymer interaction has been presented, proposing that the rate of diffusion of plasticizer through the polymer mass is a controlling factor in both good low-temperature performance and the resulting high migration losses. Methyl esters, some aromatic esters, and esters containing three or more polar centers have improved permanence but show a more rapid change in torsional modulus as the temperature is lowered during the determination of the Clash-Berg stiffening temperature. Eastern Utilization Research and Development Division, Agricultural Research Service, U. S. Department of Agriculture.     

Bildungsgeschwindigkeit von nickelhydroxidschichten wärend der kathodischen wasserstoffentwicklung

In the vicinity of a cathode where hydrogen evolution takes place, an increase of the pH-value is observed. If the solubility product of a metal hydroxide is reached in the diffusion layer or at the surface of the electrode there can be a precipitation of metal hydroxide. The kinetics of formation of Ni(OH)₂ layers at the surface of a rotating-disc electrode as a function of current density, composition of the electrolyte and thickness of the diffusion layer is being studied in the present paper.     

A Complete and Highly Effective Mothproofing Agent Comprising a Pyrethroid and a Hexahydropyrimidine

Pyrethroids, considered as a general class of compounds, have been shown to provide effective protection from the larvae of the keratin-digesting insects Tineola bisselliella H., Tinea pellionella Linn., Hofmannophila pseudo-spretella Station and Attagenus piceus Oliv. The position regarding the susceptibility of the furniture carpet beetle to pyrethroids is less clear, however. It has been reported that both deltamethrin and permethrin are effective against Anthrenus flavipes Le Conte, whilst permethrin is also reported elsewhere to be effective against the same species. Results obtained in our laboratory, however, have indicated that pyrethroids may offer inadequate protection against Anthrenus vorax Waterh. [1, 2]. This latter species is identical to Anthrenus flavipes var. seminiveus Casey, a colour variety of Anthrenus flavipes Le Conte. The 1,3-disubstituted5-phenylcarbamoyl-2,4,6-trioxo- and 4,6-dioxo-2-thione-hexahydropyrimidine derivatives described in this paper exhibit a surprisingly high and selective toxicity to the Anthrenus species. Thus, a combination of an appropriate hexahydropyrimidine with a suitable pyrethroid, e.g. permethrin, provides complete control of a wide range of commonly encountered textile insect pests. The influence of substituents on the mothproofing activity is discussed.     

Initial cholesterol uptake by everted sacs of rat small intestine: Kinetic and thermodynamic aspects

The kinetics of initial cholesterol uptake by everted rat proximal and distal small intestinal sacs were evaluated in vitro. The mucosal incubation solution consisted of 0.05 mM cholesterol solubilized in 4.8 mM sodium taurocholate micellar solution at pH 7.4. Experiments were performed at temperatures from 26 to 38 C. The rate of cholesterol uptake followed a linear relationship when plotted against time indicating an apparent zero-order kinetics mechanism for initial uptake. An Arrhenius plot of the results of uptake versus temperature remained linear over the entire range of temperatures studied. The large free energy of activation (20 kcal/mole) suggests that an energy barrier for cholesterol uptake exists at the enterocyte luminal cell membrane and may be an important limiting step in cholesterol uptake. It is proposed that a transient association between cholesterol and a component of the enterocyte luminal cell membrane is formed during initial uptake of cholesterol. The transient association may be an activated complex formed with proteins present at or within the luminal enterocyte cell membrane.     

Nanobubble generation and its applications in froth flotation (part Ⅲ): specially designed laboratory scale column flotation of phosphate

Froth flotation is used widely for upgrading raw phosphate. The flotation recovery of coarse phosphate (-1.18+0.425 mm) is much lower than that achieved on the -0.425+0.15 mm size fraction. Enhanced recovery of coarse phosphate particles is of great economic and environmental importance for phosphate industry. In this investigation, four different phosphate samples were aquired, characterized and tested in a specially designed laboratory-scale flotation column. Significant recovery improvement of coarse phosphate flotation was achieved using cavitation-generated nanobubble though its effects differ among the four testing phosphate samples. The laboratory-scale flotation column test results indicate that nanobubble increased P2O5 recovery by up to 10%-30% for a given Acid Insoluble (A.I.) rejection, depending on the characteristic of phosphate samples. The improvement ef-fect of nanobubble on the hard-to-float particles was more significant than that on easy-to-float particles, especially at lower col-lector dosages. Nanobubbles reduced the collector dosage by 1/3 to 1/2. Nanobubbles almost doubled the coarse phosphate flotation rate constant and increased the flotation selectivity index by up to 25%.