Performance indices of a common rail-system CI engine powered by diesel oil and biofuel blends

Conventional fuels used for supplying internal combustion piston engines include petrols and diesel oils produced from petroleum. These are a non-renewable energy source. The environmental policy of the European Union is geared towards increasing the share of renewable fuels in the overall energy consumption. An alternative fuel originating from a renewable source, which could be used for feeding self-ignition internal combustion engines are the fatty acid methyl esters (FAME) of plant oils. The paper reports selected results of testing a 1.3 MULTIJET SDE 90 PS self-ignition engine with the Common Rail reservoir feed system supplied with mixtures of diesel oil and rape oil fatty acid methyl esters (FAME). Tests were carried out on an engine test bed equipped with an eddy-current brake. The purpose of the tests was to determine the economic–energy and ecological indices of engine operation. The concentrations of exhaust gas gaseous components were measured using a MEXA-1600DEGR analyzer, while the particulate concentrations, with a MEXA-1230PM analyzer. In addition, the variations of working medium pressures in the engine chamber and of fuel pressure upstream the injector were recorded as a function of crankshaft rotation angle using the AVL IndiSmart 612 indication system for this purpose. The physicochemical properties of fuels used in the tests were determined using a fuel analyzer. The obtained testing results made it possible to determine and assess the operation indices of the engine fed with mixtures of diesel oil and rape oil fatty acid methyl esters (FAME) with slightly higher ester contents than the requirements of the currently applicable diesel oil standard.     

Strategies to improve the nutritional value of meat products: incorporation of bioactive compounds,reduction or elimination of harmful components and alternative technologies

Meat is an excellent source of protein with a good balance of amino acids. It is also rich in several minerals, vitamins and bioactive compounds, which play important roles in metabolism and are easily assimilated from meat compared with other foods. The nutritional value of meat is one of the factors that influence consumer acceptance. However, it can be significantly reduced during processing. Moreover, some operations, such as curing, smoking or fermentation, used for processing can lead to the formation of harmful components in meat, and hence, nutritionists associate high consumption of processed meat with an increased risk of several diseases such as cardiovascular disorders and cancers. This review deals with the distinctive aspects of the technological strategies that can be used to improve the nutritional value of meat products, including the incorporation of bioactive components, reduction or elimination of harmful components (e.g. nitrite/nitrate, fat) and alternative technologies (ultrasound).     

The influence of protein–flavonoid interactions on protein digestibility in vitro and the antioxidant quality of breads enriched with onion skin

Different types of breads enriched with onion skin were studied. The objectives were twofold: to show and examine protein–phenolic interactions and to discuss results concerning phenolic content, antioxidant activity and protein digestibility in the light of in vitro bioaccessibility. Phenolic contents and antiradical abilities were linked with the level of onion skin supplement however, the amounts determined were significantly lower than expected. Fortification influenced protein digestibility (a reduction from 78.4% for control breads to 55% for breads with a 4% supplement). Electrophoretic and chromatographic studies showed the presence of indigestible protein–flavonoid complexes – with molecular weights about 25 kDa and 14.5 kDa; however, the reduction of free amino group levels and the increase in chromatogram areas suggest that flavonoids also bind to other bread proteins. The interaction of phenolics with proteins affects antioxidant efficacy and protein digestibility; thus, they have multiple effects on food quality and pro-health properties.     

Lysophosphatic acid modulates prostaglandin secretion in the bovine uterus

Lysophosphatidic acid (LPA) modulates prostaglandin (PG) synthesis via LPA receptor 3 (LPAR3) in the murine endometrium. The lack of functional LPAR3 in mice may lead to embryo mortality. In the present study, we examined the role of LPA in the bovine uterus. We confirmed that LPA is locally produced and released from the bovine endometrium. Moreover, there are enzymes involved in LPA synthesis (phospholipase (PL) D(2) and PLA2G1B) in the bovine endometrium during estrous cycle and early pregnancy. Expression of the receptor for LPA (LPAR1) was positively correlated with the expression of PGE(2) synthase (PGES) and negatively correlated with the expression of PGF(2alpha) synthase (aldose reductase with 20 alpha-hydroxysteroid dehydrogenase activity - PGFS) during early pregnancy. In vivo LPA induced P4 and PGE(2) secretion was inhibited by LPAR1 antagonist (Ki16425). The overall results indicate that LPA is locally produced and released from the bovine endometrium. Moreover, LPAR1 gene expression in the endometrium during the estrous cycle and early pregnancy indicates that LPA may play autocrine and/or paracrine roles in the bovine uterus. LPAR1 gene expression is positively correlated with the expression of the enzyme responsible for luteotropic PGE(2) production (PGES) in endometrium. In cow, LPA stimulates P4 and PGE(2) secretion. Thus, LPA in the bovine reproductive tract may indirectly (via endometrium) or directly support corpus luteum action via the increase of P4 synthesis and the increase of PGE(2)/PGF(2)(alpha) ratio. It suggests that LPA may serve as an important factor in the maintenance of early pregnancy in cow.     

Diffusible hydrogen management in underwater wet self-shielded flux cored arc welding

This article reports the effect of underwater wet welding parameters and conditions on the diffusible hydrogen content in deposited metal for welding with a self-shielded flux cored wire. The diffusible hydrogen content in deposited metal was determined using the glycerin method according to the Plackett-Burman design determining the significance of the effect of the stick out length, welding current, arc voltage, travel speed and water salinity. The results of the measurements of the diffusible hydrogen content in deposited metal ranged from 25.85 to 44.12 ml/100 g. The effect of all the tested factors is statistically significant. An equation was also developed, the analysis of which showed, that the hydrogen content cannot be reduced by technological methods below 21 ml/100 g.     

Identification of loading conditions resulting in roller slippage in gearbox bearings of large wind turbines

The dynamic loads on the rollers inside the bearings of large wind turbine gearboxes operating under transient conditions are presented with a focus on identifying conditions leading to slippage of rollers. The methodology was developed using a multi‐body model of the drivetrain coupled with aeroelastic simulations of the wind turbine system. A 5 MW reference wind turbine is considered for which a three‐stage planetary gearbox is designed on the basis of upscaling of an actual 750 kW gearbox unit. Multi‐body dynamic simulations are run using the ADAMS software using a detailed model of the gearbox planetary bearings to investigate transient loads inside the planet bearing. It was found that assembly and pre‐loading conditions have significant influence on the bearing's operation. Also, the load distribution in the gearbox bearings strongly depends on wind turbine operation. Wind turbine start‐up and shut‐down under normal conditions are shown to induce roller slippage, as characterized by loss of contacts and impacts between rollers and raceways. The roller impacts occur under reduced initial pre‐load on opposite sides of the load zone followed by stress variation, which can be one of the potential reasons leading to wear and premature bearing failures. Copyright © 2017 John Wiley & Sons, Ltd.     

Microstructure and dielectric properties of BF–PFN ceramics with negative dielectric loss

Multiferroics with negative value of dielectric constant are very promising materials because of their modern applicability. These materials can be used as materials for the construction of electromagnetic radiation shields. The subject of the research is multiferroic BiFeO₃–PbFe_1/2Nb_1/2O₃ (BF–PFN) ceramics. For all multiferroic materials the following studies are conducted: SEM, EDS and the temperature dependence of dielectric constant ε′(T). Above a certain temperature (different for different chemical compositions) the value of dielectric constant reaches negative values. Such the behavior of the dielectric constant may indicate that the polarization inside the material has a reverse direction to the external electric field. That is, the electric field inside the material counteracts the applied external electric field. The obtaining materials also show negative dielectric losses. The Axelrod model is used to explain the mechanism that causes negative dielectric loss.     

Influence of chemical modification on tribological properties of elastomers

Physical properties of surface modified synthetic elastomers were studied to understand the factors that reduce friction and provide advantages in practical use. Bromination, iodination, sulfonation, and chlorination were investigated. The coefficient of friction μ was measured using a modified version of the pin-on-disc apparatus. The surface energy, morphology, mechanical properties, and extent of chemical modification were also measured. An increased stiffness and microroughness were found to correlate with changes in the coefficient of friction. Sulfonation (100% H₂SO₄) was found to be the most effective and universally acceptable method of chemical treatment from a tribological point of view. © 1995 John Wiley & Sons, Inc.