A novel polarizer‐free dye‐doped polymer‐dispersed liquid crystal for reflective TFT displays

Abstract— A novel preparation method for dichroic dye‐doped polymer‐dispersed liquid crystals has been developed. This was achieved by creating a porous polymer matrix first by washing out the liquid crystal from a polymer‐dispersed liquid crystal (PDLC), which is then refilled with dye‐doped liquid crystal. Optimizing the liquid crystal used in the refilling results in decreased turn‐on voltage and faster response time. Poster‐standard reflectivity and newspaper‐standard contrast was demonstrated with a 3.8‐in. QVGA reflective TFT display with a drive voltage of 10 V.     

Apparatus for studies of high-temperature chemical reactions in single particle systems

We report a compact microgravity flight apparatus for characterization of high-temperature chemical reactions in single particle systems. The apparatus employs an infrared CO(2) laser to ignite 1-5 mm samples while video images, thermocouple measurements, laser on/off status, and XYZ accelerometer signals are synchronously recorded. Different operating modes permit preignition quenching, ignition, and combustion experiments to be performed. The apparatus was successfully utilized during microgravity experiments on board NASA research aircraft.     

The application of high resolution electron microscopy to the study of oxidation

High resolution electron microscopy has been used to examine both the similarities and differences in the growth morphologies of Fe₂O₃, Cr₂O₃ as formed on iron alloys, and MgO as formed by burning Mg in moist air. A general discussion is also given of the relative advantages and disadvantages of a variety of TEM techniques as applicable to the study of oxidation phenomena.     

Static and Dynamic Slider Air-Bearing Behavior in Heat-Assisted Magnetic Recording Under Thermal Flying Height Control and Laser System-Induced Protrusion

The air bearing’s response to regions of elevated temperature on its bounding surfaces (the slider and disk) may be an important consideration in the head–disk interface design of heat-assisted magnetic recording (HAMR) systems. We implement the general non-isothermal molecular gas lubrication equation into an iterative static solver and dynamic air-bearing solver to evaluate the effect of localized heating of the air-bearing surface (ABS) due to the near-field transducer (NFT). The heat-dissipating components in our simplified HAMR design are the NFT, laser diode, and thermal flying height control (TFC) heater. We investigate the effect of each HAMR slider component on ABS temperature and thermal deformation and the slider’s flying height. The NFT induces a localized thermal spot and protrusion on the larger TFC bulge, and it is the location of maximum temperature. This ABS temperature profile alters the air-bearing pressure distribution, increasing the pressure at the hot NFT location compared with predictions of an isothermal air-bearing solver, so that the center of the pressure acting on the ABS is slightly closer to the trailing edge, thereby decreasing the pitch angle and increasing the minimum flying height. Other researchers have shown that the NFT’s thermal response time may be much faster than its protrusion response time (Xu et al. in IEEE Trans Magn 48:3280–3283, 2012). The slider’s dynamic response to a time-varying NFT thermal spot on the ABS while the combined TFC and NFT induced thermal protrusion remains constant is investigated with our dynamic air-bearing solver. We simulate the slider’s step response to a suddenly applied ABS temperature profile and a pulsed temperature profile that represents laser-on over data zones and laser-off over servo zones. The sudden (step) or rapid (pulse) increase in ABS temperature induces a sudden or rapid increase in pressure at the NFT location, thereby exciting the air bearing’s first pitch mode. For the slider design and simulation conditions used here, the result of the pitch mode excitation is to alter the position of the center of pressure in the slider’s length direction, thereby changing the pitch moment. In response, the pitch angle and minimum flying height change. The step response decays after approximately 0.15 ms. Because the laser duty cycle is much shorter than this response time, a periodic disturbance is predicted for the center of pressure coordinate, pitch angle, and minimum flying height. The peak-to-peak minimum flying height modulations are relatively small (only up to 0.126 nm); more significantly, the time-averaged minimum flying height increases 0.5 nm for the NFT that reached 208 °C compared to simulations of the isothermal ABS at ambient temperature.     

Kinematic calibration of a class of parallel kinematic machines (PKM) with fewer than six degrees of freedom

The accuracy of parallel kinematic machines (PKM), particularly machine tools is an important performance index. It has been acknowledged that kinematic calibration is a practical and economical way for enhancing the accuracy of PKM systems. The procedure usually involves four steps, i.e. error modeling, measurement, identification and implementation[1,2]. So far, most work on the kinematic calibration of PKM systems has focused upon the objects with six degrees of freedom (DOF)[3—13]. A…     

Context retrieval and context change in free recall: Recalling from long-term memory drives list isolation.

Three experiments used the "list-before-the-last" free recall paradigm (Shiffrin, 1970) to investigate retrieval for context and the manner in which context changes. This paradigm manipulates target and intervening list lengths to measure the interference from each list, providing a measure of list isolation. Correct target list recall was only affected by the target list length when participants engaged in recall between the lists, whereas there were effects of both list lengths with other activities. This suggests that the act of recalling drives context change, thus isolating the target list from interference. Correspondingly, incorrect recall of intervening list items was affected only by the length of the intervening list when recall occurred between the lists, but was otherwise affected by both list lengths. Concurrent with these changes in context similarity, there were apparent changes in context retrieval, as indicated by the overall levels of target retrieval versus intervening recall. A multinomial model of sampling and recovery was implemented to assess the adequacy of this account and to quantify context similarity and context retrieval. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Behavioral medicine, clinical health psychology, and cost offset.

The use of medical services is a function of several interacting psychological and social variables as well as a function of physical malfunction. The clinical significance of addressing patients' psychosocial issues has only occasionally been considered. However, the shift in health care economics toward health care maintenance is responsible for the increased interest in interventions in the domain of behavioral medicine and health psychology. Evidence is reviewed for 6 mechanistic pathways by which behavioral interventions can maximize clinical care and result in significant economic benefits. The rationale for further integration of behavioral and biomedicine interventions is also reviewed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Culture and group perception: Dispositional and stereotypic inferences about novel and national groups.

In 3 studies, the authors tested the hypothesis that Chinese participants would view social groups as more entitative than would Americans and, as a result, would be more likely to infer personality traits on the basis of group membership--that is, to stereotype. In Study 1, Chinese participants made stronger stereotypic trait inferences than Americans did on the basis of a target's membership in a fictitious group. Studies 2 and 3 showed that Chinese participants perceived diverse groups as more entitative and attributed more internally consistent dispositions to groups and their members. Guided by culturally based lay theories about the entitative nature of groups, Chinese participants may stereotype more readily than do Americans when group membership is available as a source of dispositional inference. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Psychological impact of benign breast biopsy: A longitudinal, comparative study.

The impact of benign breast biopsy (BBB) on distress and perceptions of risk for breast cancer (BC) was examined. Interviews were conducted with 100 women shortly after notification of biopsy results and 4 and 8 months post-BBB. Compared with matched healthy comparison (HC) women without BBB, the BBB group evidenced greater BC-specific distress at baseline. BC-specific distress declined after BBB, remaining elevated relative to the HC group at the 8-month follow-up. Dispositional (optimism, informational coping style), demographic (education), clinical (family history of BC), and cognitive (BC risk perception) variables were associated with baseline levels of BC-specific distress or persistence of distress. Results support the monitoring process model (S. M. Miller, 1995) and the cognitive social health information processing model (S. M. Miller, Y. Shoda, & K. Hurley, 1996). (PsycINFO Database Record (c) 2010 APA, all rights reserved)