Application of retrodirective beams to achieve low sidelobe levelsin small phased arrays

Synthesis of beams with low sidelobe levels is a difficult problem for the case of small phased arrays with few elements. Mutual coupling between elements means that conventional weighting algorithms are not applicable. A technique is presented that calculates a complex weight vector for a five element linear array, giving a reduced sidelobe beam pattern. Sidelobes are reduced by the addition of retrodirective beams to the quiescent beam pattern. No knowledge of the coupling coefficients or element radiation patterns is required     

Inhaled nitric oxide is not a myocardial depressant in a porcine model of heart failure

BACKGROUND: Inhaled nitric oxide has been shown to be a potent and selective pulmonary vasodilator. Reports of increases in left ventricular end-diastolic pressure and episodes of pulmonary edema during the clinical use of inhaled nitric oxide in patients with preexisting left ventricular dysfunction have raised concerns that this agent may have myocardial depressant effects. We therefore undertook a study of the effects of inhaled nitric oxide on myocardial contractility in a porcine model of ventricular failure and pulmonary hypertension. METHODS: After inducing heart failure in 10 pigs by rapid ventricular pacing, hemodynamic measurements and pressure-volume diagrams (by the conductance method) were obtained in six animals at baseline and during administration of inhaled nitric oxide at concentrations of 20 and 40 ppm. Myocardial contractile state was assessed by the end-systolic pressure-volume relationship and preload-recruitable stroke work, whereas diastolic function was measured in terms of the end-diastolic pressure-volume relationship and the pressure decay time constant T. RESULTS: Baseline hemodynamics reflected heart failure and pulmonary hypertension, and inhaled nitric oxide induced significant reductions in mean pulmonary artery pressure and pulmonary vascular resistance. Although left ventricular end-diastolic pressure increased during administration of inhaled nitric oxide, no changes were observed in measures of systolic or diastolic function. CONCLUSIONS: Inhaled nitric oxide reduced pulmonary vascular resistance but did not alter myocardial contractility or diastolic function. Increases in left ventricular end-diastolic pressure during inhaled nitric oxide therapy are therefore not due to myocardial depression and may be related to increases in volume delivery to the left side of the heart resulting from reduced pulmonary vascular resistance.     

Dynex: multiplex ELISA technology

Conventional enzyme-linked immunosorbent assay (ELISA) is a gold standard for screening antibodies and testing for protein or antigen presence. A significant limitation of this assay resides in the fact that only one analyte can be assessed per microplate well. Here, we describe and investigate a new technology consisting of an automated ELISA system in which up to 10 analytes can be measured within one single well, thus improving productivity, accuracy, and repeatability by reducing the amount of human labor required. Another strength of the platform is that a user can load any necessary sets/subsets of beads to perform required assays, with improved flexibility compared to manufactured-loaded arrays for multiplex analysis. We also demonstrate that this system can be used to determine the pathogenicity (i.e., presence of Shiga toxins) and serotype (i.e., Escherichia coli O157) of E. coli isolates.     

Commercial objectives,technology transfer,and systems analysis for fusion power development

Fusion is an essentially inexhaustible source of energy that has the potential for economically attractive commercial applications with excellent safety and environmental characteristics. The primary focus for the fusion-energy development program is the generation of centralstation electricity. Fusion has the potential, however, for many other applications. The fact that a large fraction of the energy released in a DT fusion reaction is carried by high-energy neutrons suggests potentially unique applications. These include breeding of fissile fuels, production of hydrogen and other chemical products, transmutation or burning of various nuclear or chemical wastes, radiation processing of materials, production of radioisotopes, food preservation, medical diagnosis and medical treatment, and space power and space propulsion. In addition, fusion R&D will lead to new products and new markets.Each fusion application must meet certain standards of economic and safety and environmental attractiveness. For this reason, economics on the one hand, and safety and environment and licensing on the other hand, are the two primary criteria for setting long-range commercial fusion objectives. A major function of systems analysis is to evaluate the potential of fusion against these objectives and to help guide the fusion R&D program toward practical applications. The transfer of fusion technology and skills from the national laboratories and universities to industry is the key to achieving the long-range objective of commercial fusion applications.     

Combinatorial materials research applied to the development of new surface coatings: II. Process capability analysis of the coating formulation workflow

A combinatorial process has been developed for the high throughput production and evaluation of surface coatings. The workflow designed for the production of arrays of liquid coatings involves the robotic transfer of aliquots of solutions of raw materials to an array of glass vials and mixing of the coatings using an unconventional magnetic stirring process. An investigation of the capability of the workflow to accurately and repeatedly prepare coating arrays was conducted as a function of solution viscosity and aliquot size. In addition, mixing capability was evaluated as a function of solution viscosity, total solution volume, and mechanism of stirring. Overall, the results of the study indicated that adequate accuracy and repeatability of the coating preparation process can be achieved as long as raw material solutions are designed such that viscosity is below about 250 cP and aliquot sizes are above about 75 μl. With regard to mixing capability, total solution volume was found to have a profound affect as did the stirring mechanism.     

Thermal degradation of aliphatic–aromatic polyamides: Kinetics of N,N′-Dihexylisophthalamide neat and in presence of copper lodide

An experimental study to determine the effect of copper (I) iodide (Cul) on the rate and product distribution of degradation of a model of an aliphatic–aromatic polyamide was carried out. N,N′-Dihexylisophthalamide (DHI) was reacted in both an inert argon atmosphere and a pure oxygen environment at 350°C with CuI added in amounts ranging from 0 to 20% by weight. The rate of disappearance of DHI was enhanced by an order of magnitude when 0.5% by weight of CuI was added and was an increasing function of increasing CuI loading. Reaction in pure O₂ increased the rate of DHI degradation by two orders of magnitude over that for neat DHI pyrolysis. The rate of disappearance of DHI in O₂ was relatively unchanged when 5% CuI by weight was added. The transformations of DHI and its products are organized in terms of a set of reaction rules. This “reaction operator” formalism allowed computer generation of the reaction network and facilitated estimation of kinetic parameters. © 1995 John Wiley & Sons, Inc.     

A comparative study of UV active silane-grafted and ion-exchanged organo-clay for application in photocurable urethane acrylate nano- and micro-composites

A number of urethane acrylate nano- and micro-composites have been developed using both ion exchange and silane grafting chemistry. The organically modified clays which were used contained either methacrylate or acrylate functionalities which were capable of reacting with the acrylate groups in the urethane acrylate matrix. [2-(Acryloyloxy)ethyl]trimethyl-ammonium ion (AOETMA) or [2-(methacryloyloxy)ethyl]trimethylammonium ion (MAOTMA) were exchanged onto montmorillonite (MMT) as shown by an increase in the inter-gallery spacing of the MMT. Silane grafting was undertaken using [3-(acryloxy)propyl]dimethylmethoxysilane (APDMMS) or [3-(methacryloxy)propyl]dimethylmethoxysilane (MAPDMMS) and also showed an increase in inter-gallery spacing. The structures of the resulting urethane acrylate composites were characterized using X-ray diffraction (XRD) and transmission electron microscopy (TEM) and showed predominantly intercalated structures with some exfoliation (more evident in the silane-grafted systems). Dynamical mechanical thermal analysis (DMTA) showed a more significant increase in effective crosslink density (as measured from the plateau of the rubbery modulus) in the composites containing the reactive clays as compared to the unmodified clay, supporting the concept that the acrylate and methacrylate functionalities of the modified clays had reacted with the matrix. Other thermal and mechanical properties were also evaluated.     

Effect of polyaluminium chloride on phosphorus removal in constructed wetlands treated with swine wastewater

Total phosphorus (TP) removal in aged constructed wetlands poses a challenge, especially when treated with swine wastewater with high concentrations of phosphorus (P). Our earlier studies with anaerobic lagoon swine wastewater treatment in constructed wetlands showed a decline in P removal (45-22%) with increased years of operation. These particular wetlands have been treated with swine wastewater every year since the first application in 1997. Preliminary lab-scale studies were conducted to evaluate the efficiency of polyaluminium chloride (PAC) in the removal of phosphate-P (PO4-P) from swine wastewater. The experimental objective was to increase the phosphorus treatment efficiency in constructed wetland by adding PAC as a precipitating agent. PAC was added by continuous injection to each wetland system at a rate of 3 L day(-1) (1:5 dilution of concentrated PAC). Swine wastewater was added from an anaerobic lagoon to four constructed wetland cells (11m wide x 40m long) at TP loads of 5.4-6.1 kg ha(-1) day(-1) in two experimental periods, September to November of 2008 and 2009. Treatment efficiency of two wetland systems: marsh-pond-marsh (M-P-M) and continuous marsh (CM) was compared. The wetlands were planted with cattails (Typha latifolia L.) and bulrushes (Scirpus americanus). In 2008, PAC treatment showed an increase of 27.5 and 40.8% of TP removal over control in M-P-M and CM respectively. Similar trend was also observed in the following year. PAC as a flocculant and precipitating agent showed potential to enhance TP removal in constructed wetlands treated with swine wastewater.     

Synthesis and characterization of (Sr1−x′K2x)Zr4(PO4)6 ceramics

Single phase (Sr_1–x K_2x )Zr₄(PO₄)₆, where x lies between 0.0 and 1.0, ceramic powder with a submicron scale particle size has been synthesized successfully at calcination temperatures as low as 650–750°C by a sol-gel technique. The formation of the powder strongly depends on calcination temperature, but is independent of solution pH in the studied range. Dilatometric measurement shows an ultra-low linear coefficient of thermal expansion of 0.1×10^–6°C^–1 when x=0.5 at temperature intervals of 25–1000°C. Thermal conductivity and flexural strength of the materials were determined at ambient temperature to be 1.0 Wm^–1K^–1 and as high as 280 MPa, respectively, indicating that this material can be an excellent candidate in many applications, especially those subjected directly to severe environments.