A Comprehensive Survey of Emergency Communication Network and Management

Wireless Personal Communications - The performance of wireless communication network is important in emergency rescue operations while ensuring optimum usage of limited wireless resources. Due to...     

Efficient Modeling of Transmission Lines With Electromagnetic Wave Coupling by Using the Finite Difference Quadrature Method

This paper proposes an efficient numerical technique, called the finite difference quadrature (FDQ) method, to model the transmission line with radiated electromagnetic (EM) wave noise coupling. A discrete modeling approach, the FDQ method adapts coarse grid points along the transmission line to compute the finite difference between adjacent grid points. A global approximation scheme is formulated in the form of a weighted sum of quantities beyond the local grid points. Unlike the Gaussian quadrature method that computes numerical integrals by using global approximation framework, the FDQ method uses a global quadrature method to construct the approximation schemes for the computation of, however, numerical finite differences. As a global approximation technique, the FDQ method has superior numerical dispersion to the finite difference (FD) method, and, therefore, needs much sparser grid points than the FD method to achieve comparable accuracy. Equivalent voltage and current sources are derived, exciting the transmission line at the grid points. Equivalent circuit models are consequently derived to represent the transmission line subject to radiated electromagnetic wave noise. The FDQ-based equivalent models can be integrated into a simulator like SPICE.     

Chronic arsenic toxicity in west Bengal--the worst calamity in the world

Since 1983 large number of people are being encountered with arsenic toxicity due to drinking of arsenic contaminated water (0.05-3.2 mg/l) in 6 districts of West Bengal. Clinical and various laboratory investigations were carried out on 156 patients to ascertain the nature and degree of morbidity and mortality that occurred due to chronic arsenic toxicity. All the patients studied had typical rain drop like skin pigmentation (being inclusion criteria) while thickening of palm and sole were found in 65.5% patients. Other features included weakness (70%), gastro-intestinal symptoms (58.6%), involvement of respiratory system (57.08%) and nervous system (50.6%). Lung function tests showed restrictive lung disease in 53% (9/17) and combined obstructive and restrictive lung disease in 41% (7/17) of patients. Abnormal electromyography was found in 34.8% (10/29) and altered nerve conduction velocity in 34.8% (10/29) of cases. Enlargement of liver was found in 120 cases (76.9%) while splenomegaly in 31.4% cases. Liver function test showed elevated globulin level in 15.8% and alkaline phosphatase in 51.3%, alanine amino transferase (ALT) in 11.8% and aspartate amino transferase (AST) in 27.6% of cases. Evidence of portal hypertension was found in 33.3% patients. Liver biopsy reports of 45 patients showed non-cirrhotic portal fibrosis in 41, cirrhosis in 2 and normal histology in 2 cases. There was no correlation between the quantity of arsenic taken through water and the level of arsenic in hair, nail, liver tissues and the degree of fibrosis. There were 5 deaths of which one had skin cancer. The various non-cancer manifestations which were observed in these patients were much severe than those reported in similar cases in other parts of the world.     

Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition

Direct metal deposition (DMD) is a rapid laser-aided deposition method that can be used to manufacture near-net-shape components from their computer aided design (CAD) files. The method can be used to produce fully dense or porous metallic parts. The Ti-6Al-4V alloy is widely used as an implantable material mainly in the application of orthopedic prostheses because of its high strength, low elastic modulus, excellent corrosion resistance, and good biocompatibility. In the present study, Ti-6Al-4V scaffold has been fabricated by DMD technology for patient specific bone tissue engineering. Good geometry control and surface finish have been achieved. The structure and properties of the scaffolds were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and tension test. The microstructures of laser-deposited Ti-6Al-4V scaffolds are fine Widmanstätten in nature. The tensile and yield strengths of the as-deposited Ti-6Al-4V were 1163 ± 22 and 1105 ± 19 MPa, respectively, which are quite higher than the ASTM limits (896 and 827 MPa) for Ti-6Al-4V implants. However, the ductility of the as-deposited sample was very low (～4 pct), which is well below the ASTM limit (10 pct). After an additional heat treatment (sample annealed at 950 °C followed by furnace cooling), both strength (UTS ～ 1045 ± 16, and YS ～ 959 ± 12 MPa) and ductility (～10.5 ± 1 pct) become higher than ASTM limits for medical implants.     

Microstructure of laser clad Ni- Cr- Al- Hf alloy on a γ′ strengthened ni- base superalloy

Alloys and coatings for alloys for improved high temperature service life under aggressive atmo-spheres are of great contemporary interest. There is a general consensus that the addition of rare earths such as Hf will provide many beneficial effects for such alloys. The laser cladding technique was used to produce Ni-Cr-AI-Hf alloys with extended solid solution of Hf. A 10 kW CO₂ laser with mixed powder feed was used for laser cladding. Optical, scanning electron (SEM) and scanning transmission electron (STEM) microscopy were employed to characterize the microstructure of alloys produced during laser cladding processes. Microstructural studies revealed grain refinement, considerable in-crease in solubility of Hf in the matrix, Hf-rich precipitates, and new metastable phases. The size and morphology of γ′ (Ni₃Al) phase were discussed in relation to its microchemistry and the laser processing conditions. This paper will report the microstructural development in this laser clad Ni-Cr-AI-Hf alloy. Formerly Visiting Assistant Professor, Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign.     

Laser-clad Ni70Al20Cr7Hf3 alloys with extended solid solution of Hf: Part II. Oxidation behavior

Ni-Al-Cr-Hf coatings with an extended solid solution of Hf were fabricated by laser cladding a premixed powder with a Ni-Al-Cr-Hf ratio of 70∶20∶7∶3 onto a substrate of RENé 80. Isothermal oxidation tests in slowly flowing air reveal that the claddings have a lower weight-gain rate than the substrate itselt. Microchemistry and microstructures of the oxidized samples were examined using scanning electron microscopy (SEM) and Auger electron spectroscopy (AES). The improvement in oxidation resistance is believed to be at least partially due to the formation of large numbers of hafnium-rich oxide spikes penetrating the unoxidized sample.     

Ecosystemic effects of salmon farming increase mercury contamination in wild fish

Net-pen salmon aquaculture has well-known effects on coastal ecosystems: farm waste increases sediment organic content and the incidence of sediment anoxia, supports increased production of deposit-feeding invertebrates, and attracts higher densities of demersal fish and other mobile carnivores. These impacts are widely considered to be localized and transitory, and are commonly managed by imposing a period of fallowing between cycles of production. The implications of these ecosystemic effects for contaminant cycling, however, have not previously been considered. We found elevated levels of mercury in demersal rockfishes near salmon farms in coastal British Columbia, Canada, attributable to a combination of higher rockfish trophic position and higher mercury levels in prey near farms. Mercury concentrations in long-lived species such as rockfishes change over a longer time scale than cycles of production and fallowing, and thus at least some important effects of fish farms may not be considered transitory.     

Chemical Investigations on Celastrus paniculatus Seed Oil I

Fatty acid compositions of four lipid fractions of Celastrus paniculatus seed namely normal triglycerides (20.2%), polar triglycerides (44.4%), polar nonglyceridic ester (23.5%), and nonpolar nonglyceridic ester (11.9%), have been determined by gas liquid chromatography. Percentage contents of major component acids in these fractions are: palmitic, 25.1, 42.0, 12.7, 58.2; stearic, 6.7, 4.5, 15.8; oleic, 46.1, 24.8, 4.7, 14.2; linoleic, 15.4, 14.7, 10.0; and linolenic, 3.0, 13.1, 43.0, respectively. The major molecular species constituting the normal triglycerides are: palmitooleopalmitin, 6.8%; palmitooleostearin, 5.6%; palmitodiolein, 14.7; palmitooleolinolein, 7.0%; stearodiolein, 6.1%; triolein, 8.0% and dioleolinolein 7.6%. Lipolysis of the polar triglyceride indicated as high as 59.6% of saturated acids linked to the 2-position of glycerol.