Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

基于免疫算法的Hopfield神经网络多用户检测器

提出的基于免疫算法的Hopfield神经网络多用户检测器，将扰乱的Hopfield神经网络多用户检测器的输出作为免疫算法的初始种群，利用了免疫算法的全局收敛的特点，从而克服了Hopfield易收敛到局部能量最小点的缺点。理论分析和仿真结果表明：该检测器具有良好的抗多址干扰和抗远近效应的能力。     

硬质合金与铁基复合材料热等静压扩散连接

以烧结结态硬质合金和粉末态铁基复合材料为连接对象，研究了两种材料的热等静压扩攻连接工艺，获得了直接连接接头和加镍作中间过渡层的间接连接接头，考察了接头的结合界面形貌，界面的元素扩散和界面结合强度。     

Optically tuned superconductive-dielectric resonators with whispering-gallery modes

An analytical method is presented for calculating the resonant frequency andQ-factor of a superconducting dielectric disk resonator operating in millimeter-wave regime with whispering-gallery mode. Resonant frequency shift due to the optical generation of quasi-particles in superconducting film is investigated as a function of photon flux. An optically tunable resonant frequency of about 500 MHz is estimated, and good agreement is found between numerical results and experimental ones.     

液态金属钠高温沸腾实验回路应力分析与强度计算

本文主要完成了液态金属钠高温沸腾实验回路的应力分析与计算，确定了回路高温区连接管系的布置型式和支吊架系统，是该回路总体设计的重要组成部分。     

瞬态光的光电摄谱测量

“光电摄谱法”是一种辐射光谱计量参数的测量方法,此法解决了单次脉冲闪光灯辐射光谱相对能量分布的精确测量问题。本文介绍了这种方法的测量原理、方法和特点,同时阐述了对接收器件、光路系统和时控电器系统的要求,并以自行研制的闪光光谱测定仪为例,对其计量参数波长和相对能量的标定与校正给予了必要的讨论,最后以实测结果证实了该方法的可靠性。     

中和室脉冲进气的蒙特卡罗模拟及实验验证

对于中和室内的脉冲气体，用蒙特卡罗方法模拟了气体压力沿轴向的分布。并用模拟进气系统和气压瞬时测量系统，对模拟结果进行了验证。得到与模拟结果较为一致的曲线，从而为注入器真空系统的设计提供了可靠的依据。并通过实验结果，给出了气体靶厚的建立时间约为６０ｍｓ。     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

Variable-gain up-converter with current reuse for 5-GHz WLAN applications

A variable-gain up-conversion mixer for 5-GHz WLAN applications is presented, whose input stage is based on a novel variable gain transconductor. The proposed topology features reduced power consumption by exploiting dc current reuse for mixer biasing. Moreover, a new low-consumption control circuit is introduced, which achieves a temperature-stable and linear-in-dB characteristic, providing a 40-dB dynamic range within ±1 dB gain error.