Thermal performance of ground as an inexpensive solar collector and storage system

This paper presents an analysis of the performance of an inexpensive integrated solar collector and storage system. The flow of fluid and heat capacity of the storage material in the container is considered simultaneously and an evaluation is made for the resulting outlet fluid temperature for various flow rates and materials by solving the Fourier heat conduction equation with appropriate boundary conditions in different regions. This evaluation, combined with energy balance considerations, yields an expression for the transient rate at which heat can be retrieved—by keeping flow rate constant. Numerical calculations, corresponding to a typical winter day in Delhi have been carried out. The heat retrieval efficiencies are of the order of 50-25%. A phase difference of about 12–18 h is obtained between the maxima of solair temperature and outlet water temperature. The efficiency of the system increases with flow rate and decreases with depth of plane of heat retrieval. Concrete is found to be the best inexpensive sensible heat storage material out of those materials considered.     

Heat transfer enhancement in cross-flow heat exchangers using oval tubes and multiple delta winglets

A three-dimensional study of laminar flow and heat transfer in a channel with built-in oval tube and delta winglets is carried out through the solution of the complete Navier-Stokes and energy equations using a body-fitted grid and a finite-volume method. The geometrical configuration represents an element of a gas-liquid fin-tube cross-flow heat exchanger. The size of such heat exchangers can be reduced through enhancement of transport coefficients on the air (gas) side, which are usually small compared to the liquid side. In a suggested strategy, oval tubes are used in place of circular tubes, and delta-winglet type vortex generators in various configurations are mounted on the fin-surface. An evaluation of the strategy is attempted in this investigation. The investigation is carried out for different angles of attack of the winglets to the incoming flow for the case of two winglet pairs. The variation of axial location of the winglets is also considered for one pair of winglets mounted in common-flow-down configuration. The structures of the velocity field and the heat transfer characteristics have been presented. The results indicate that vortex generators in conjunction with the oval tube show definite promise for the improvement of fin-tube heat exchangers.     

Economic analysis of a G.I. sheet multiwick solar distillation plant

On account of the energy crisis, several types of solar energy devices have been developed and marketed in various parts of the world with varying degrees of thermal performance. The economic aspect of these solar energy devices becomes more significant when they replace those devices which use conventional fuels. In this paper, an economic analysis of one of the solar energy devices, namely a G.I. sheet multiwick solar distillation plant, has been presented taking into account the various factors, viz. the lifetime of the system, salvage values of the system, interest rate and maintenance cost.     

Transient analysis of double basin solar still

The effect of water flowing over the upper glass cover of a double basin solar still on its transient performance has been presented. A comparative study of the daily distillate production of a double basin solar still with and without water flowing over the upper glass cover has been made, and some interesting conclusions have been drawn. Numerical calculations have been made for a typical hot day (viz 2 May 1980) in Delhi.     

Demonstration plant of a multi wick solar still

A solar distillation plant of capacity 70 litres/day (annual average) has been installed at the Centre of Energy Studies, Indian Institute of Technology, New Delhi, India. The system has been working for the last 1 year, and its performance is found to be satisfactory. It meets the requirements of distilled water in the Institute.     

Performance of an inexpensive underground shallow solar pond water heater

In this communication, an inexpensive underground shallow solar pond (SSP) water heater has been suggested, and its performance has also been studied in detail. An explicit analytical expression for temperature has been obtained. The effect of various parameters, viz duration of covering the system by insulation, duration of flow rate, flow rate, insulation thickness, water mass, etc. have also been discussed. Numerical calculations have been made for a typical cold day.     

Hispolon Cyclodextrin Complexes and Their Inclusion in Liposomes for Enhanced Delivery in Melanoma Cell Lines

Hispolon, a phenolic pigment isolated from the mushroom species Phellinus linteus, has been investigated for anti-inflammatory, antioxidant, and anticancer properties; however, low solubility and poor bioavailability have limited its potential clinical translation. In this study, the inclusion complex of hispolon with Sulfobutylether-β-cyclodextrin (SBEβCD) was characterized, and the Hispolon-SBEβCD Complex (HSC) was included within the sterically stabilized liposomes (SL) to further investigate its anticancer activity against melanoma cell lines. The HSC-trapped-Liposome (HSC-SL) formulation was investigated for its sustained drug delivery and enhanced cytotoxicity. The inclusion complex in the solid=state was confirmed by a Job’s plot analysis, molecular modeling, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), Proton nuclear magnetic resonance (NMR) spectroscopy, and scanning electron microscopy (SEM). The HSC-SL showed no appreciable deviation in size (<150 nm) and polydispersity index (<0.2) and improved drug encapsulation efficiency (>90%) as compared to control hispolon liposomes. Individually incorporated hispolon and SBEβCD in the liposomes (H-CD-SL) was not significant in loading the drug in the liposomes, compared to HSC-SL, as a substantial amount of free drug was separated during dialysis. The HSC-SL formulation showed a sustained release compared to hispolon liposomes (H-SLs) and Hispolon-SBEβCD liposomes (H-CD-SLs). The anticancer activity on melanoma cell lines (B16BL6) of HSC and HSC-SL was higher than in H-CD-SL and hispolon solution. These findings suggest that HSC inclusion in the HSC-SL liposomes stands out as a potential formulation approach for enhancing drug loading, encapsulation, and chemotherapeutic efficiency of hispolon and similar water insoluble drug molecules.     

Rolling System Design Using Evolutionary Sequential Process Optimization

The design of a rolling system is a multistage process optimization problem involving sequential relationship between consecutive stages. This relationship is peculiar to sequential processes in which the output stock of one stage serves as the input stock into the deforming tool of the other stage. This paper describes the optimization of a real-life rolling system design using a genetic algorithm (GA)-based approach capable of dealing with the sequential nature of this problem. It presents a mathematical model of a real-life rolling system design and explains the proposed optimization approach. Even in the presence of multiple stages, the proposed approach identifies a variety of near-optimal design solutions from which one could be finally chosen based on designer's preferences. It is also shown that the obtained solutions dominate the designs reported in literature.     

Multiscale mechanical and structural characterizations of Palmetto wood for bio-inspired hierarchically structured polymer composites

There has been a great deal of effort focused on engineering polymer composites with hierarchical microstructures consisting of one or more ingredients that can be organized differently across multiple length scales. However, there are hierarchical microstructures that have evolved over eons in biological materials. These unique structure–property relationships may serve as templates for engineering hierarchically structured polymer composites with tailored properties. One such biological material is the Palmetto wood of South Carolina, which was successfully used as a protective structure during the Revolutionary and Civil Wars to absorb cannon shot. Through an assembly of microfibers into macrofibers embedded in a cellulose matrix, the Palmetto wood has optimized its ability to resist failure when subjected to extreme dynamic loading events, such as hurricanes. Understanding of the dynamic and static structure–property relationship in Palmetto wood can facilitate the development of new hierarchically structured polymer composites with increased resistance to failure. Therefore, the structure–property relationship in Palmetto wood has been studied using novel multiscale microstructural and mechanical characterization techniques. Models have been developed that indicate that the hierarchical structure of Palmetto wood obeys the linear Rule-of-Mixtures across multiple length scales. This understanding has led to the development of new polymer composite structures that exhibit properties similar to Palmetto wood using conventional laminated carbon fiber–epoxy composites and new polymer nanocomposites consisting of carbon nanofibers. The use of the nanofibers appears to enhance the interaction between the composite components in a manner similar to the interaction between fibers in the Palmetto wood that enables the laminated composite to behave more like the individual layers by resisting the tendency to delaminate and increasing the Weibull statistical parameters closer to those observed in Palmetto wood.