A comprehensive study of the loss of enzyme activity in a continuous membrane reactor – application to starch hydrolysis

Loss of enzyme activity is a problem associated with enzymatic reactions in continuous recycled membrane reactors (CRMR). It may result from catalyst leakage and also enzyme denaturation due to the effects of pH, temperature, shear effects or adsorption/deposit on membrane. In this study, the relative importance of these various factors has been assessed in order to reduce their adverse effects on starch hydrolysis in a CRMR. The effects of temperature and denaturation by adsorption/deposit on membrane were the most limiting phenomena. Reducing the temperature to overcome thermal denaturation was not a practical solution since this increases viscosity and thereby decreases permeate flux and reactor performance. Insofar that adsorption/deposit of enzymes on the membrane is directly linked to membrane fouling, back‐flushing or regularly purging retentate should reduce this phenomenon by lowering accumulation of high molecular weight products. © 2001 Society of Chemical Industry     

Solid/Liquid Separation of Pig Manure by Biological Flotation: Pilot-Scale Study

Many problems are associated with pig manure production like high biochemical oxygen demand, chemical oxygen demand, nitrogen, and phosphorus contents. Manure produces may be used in land spreading for agricultural purposes. Over application of liquid manure or runoff caused by precipitation contribute notably to surface or overland flow of phosphorus. In this study, the LISOX process is proposed for use in medium size farms, namely a 2,000-head swine farm. The LISOX process uses biological passive flotation, without any gas addition, to enable the flocs to rise to the surface. Results show that this technology is able to considerably reduce the solids content in the final effluent to 1.1±0.3% and reached solids content of 17.9±2.6% in the combined solid manure obtained at the end of the LISOX process. Total phosphorus (Pt) concentrations have been reduced from 1,234±428?mg/L to 146±46?mg/L in the final effluent, while a value of Pt of 20.6±7.9?g/kg has been obtained in the final solid fraction of the treated manure. The initial ammonium ion/total phosphorus ratio of 2.3±1.0 has been increased to respectively 16.4±4.6 and 17.6±5.4 after the primary and the secondary flotation, which is clearly much higher than the target value (NH4/Pt>7).     

Three-dimensional blind deconvolution of SPECT images

Thanks to its ability to yield functionally rather than anatomically-based information, the three-dimensional (3-D) SPECT imagery technique has become a great help in the diagnostic of cerebrovascular diseases. Nevertheless, due to the imaging process, the 3-D single photon emission computed tomography (SPECT) images are very blurred and, consequently, their interpretation by the clinician is often difficult and subjective. In order to improve the resolution of these 3-D images and then to facilitate their interpretation, we propose herein to extend a recent image blind deconvolution technique (called the nonnegativity support constraint-recursive inverse filtering deconvolution method) in order to improve both the spatial and the interslice resolution of SPECT volumes. This technique requires a preliminary step in order to find the support of the object to be restored. In this paper, we propose to solve this problem with an unsupervised 3-D Markovian segmentation technique. This method has been successfully tested on numerous real and simulated brain SPECT volumes, yielding very promising restoration results.     

Synchrony in heterogeneous networks of spiking neurons

The emergence of synchrony in the activity of large, heterogeneous networks of spiking neurons is investigated. We define the robustness of synchrony by the critical disorder at which the asynchronous state becomes linearly unstable. We show that at low firing rates, synchrony is more robust in excitatory networks than in inhibitory networks, but excitatory networks cannot display any synchrony when the average firing rate becomes too high. We introduce a new regime where all inputs, external and internal, are strong and have opposite effects that cancel each other when averaged. In this regime, the robustness of synchrony is strongly enhanced, and robust synchrony can be achieved at a high firing rate in inhibitory networks. On the other hand, in excitatory networks, synchrony remains limited in frequency due to the intrinsic instability of strong recurrent excitation.     

Expression des émotions dans le dessin d'un homme chez l'enfant de 5 à 11 ans.

This study examines the development of children's ability to express emotions in their human figure drawing. Sixty children of 5, 8, and 11 years were asked to draw "a man," and then a "sad", "happy," "angry" and "surprised" man. Expressivity of the drawings was assessed by means of two procedures: a limited choice and a free labelling procedure. Emotionally expressive drawings were then evaluated in terms of the number and the type of graphic cues that were used to express emotion. It was found that children are able to depict happiness and sadness at 8, anger and surprise at 11. With age, children use increasingly numerous and complex graphic cues for each emotion (i.e., facial expression, body position, and contextual cues). Graphic cues for facial expression (e.g., concave mouth, curved eyebrows, wide opened eyes) share strong similarities with specific "action units" described by Ekman and Friesen (1978) in their Facial Action Coding System. Children's ability to depict emotion in their human figure drawing is discussed in relation to perceptual, conceptual, and graphic abilities. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Laser-Enhanced Gas Phase Surface Modifications of Teflon AF1600 for Increased Copper Adhesion

Multilevel interconnect devices, made of alternating layers of a low permittivity polymer (e.g., Teflon AF1600^TM) and a low resistivity metal (e.g., copper), are increasingly being used in microelectronics in order to decrease the RC signal transmission time delay. The mechanical stability of the multilevel interconnects is related to the adhesion developed at the metal-dielectric interface. Since Cu/Teflon AF1600 adhesion is moderate and may not satisfy the requirements of the microelectronics industry, new treatments of the fluoropolymer surface are needed to improve it. In this note, we present several surface modifications, such as the formation of reactive sites during intense X-ray exposure, and S- or N-grafting, activated by UV radiation in the presence of H₂S and NH₃; copper is well known to react with both thiols (R—SH) and amines (R—NH₂) to form strong bonds. Both X-ray exposure and N-grafting lead to enhanced adhesion.     

Continuous active T-gate travelling-wave transistor

In the letter experimental results are presented which show that a continuous active gate travelling-wave transistor (TWT) can be used for medium power applications in a wide bandwidth. To reduce the gate resistance, a T-gate configuration has been chosen. This allows one to extend the frequency bandwidth of such a device. Simulations have been performed using small- and large-signal models taking in addition the parasitic capacitances into account. A distributed Schottky diode has been used to adjust the phase synchronisation and therefore to achieve flat gain.<>     

Phase-sensitive spatially-modulated surface plasmon resonance polarimetry for detection of biomolecular interactions

We here describe a scheme of spatially modulated surface plasmon resonance (SPR) polarimetry that enables to combine ultra-high phase sensitivity with good signal-to-noise background. The proposed approach uses spatial modulation of s-polarized component by birefringent elements and the extraction of phase-polarization information by Fourier-transform methods. This scheme was tested for monitoring the interactions between an antibody and its biological partner. Our experimental data, collected by amplitude-sensitive and phase-sensitive polarimetry demonstrate that the latter scheme provides at least one order of magnitude improvement in terms of detection limit.     

Circuit coupling method applied to bulk superconductors

This paper presents a new finite-element method for including a bulk superconductor in an electrical circuit. The method solves simultaneously the finite-element equations of A/spl psi/ formulation and the circuit equations. At the same time, a power law defines the superconducting properties. The method then compares the classical homogeneous model of a Bi-2223 tape to a multifilament model. The results of a simulation of conductors carrying alternative current while subjected to an external ac field are presented.