Production and Emulsifying Effect of Polyglycerol and Fatty Acid Esters with Varying Degrees of Esterification

Esters with acyl groups can be formed by the esterification of polyglycerol. The purpose of the present study was to produce fatty acid esters [hexanoic (caproic), octanoic (caprylic), decanoic (capric), dodecanoic (lauric), tetradecanoic (myristic), hexadecanoic (palmitic), octadecanoic (stearic)] and polyglycerol (average number‐of degrees of polymerization of 5) with varying degrees of esterification and to examine their emulsifying properties. A number of fundamental catalysts of polyglycerol acylation reactions by methyl esters of carboxylic acid were studied, and sodium methoxide was found to be the best choice. The temperature rate of transesterification increased from 180 to 220 °C with the fatty acid chain alkyl residue. Synthesized mono‐, di‐, tri‐, tetra‐, and heptaesters of various fatty acids and polyglycerol provided the highest hydroxyl values from 15 to 815 mg KOH g^?1 and saponification values from 82 to 321 mg KOH g^?1. The emulsifying properties were assessed for all polyglycerol and fatty acid esters, with results showing maximum emulsifying effect for tri‐ and tetraesters of capric, lauric, and caprylic acids. Regardless of the hydrophilic–lipophilic balance value (HLB) of polyglycerol esters and carboxylic acid, a 4:1 ratio of sunflower oil to water formed a water‐in‐oil type emulsion. When mixing oil and water in a 1:1 ratio, mono‐ and diesters of polyglycerol formed an oil‐in‐water type emulsion, heptaesters formed a water‐in‐oil type emulsion, and tri‐ and tetraesters formed both of types of emulsions, depending on the length of the acid hydrocarbon radicals.     

Microtribology,squeeze, and friction of the colloidal layer

Lubricant films containing colloidal overbased calcium salts have particular effects on detergency and on the wear process. The mechanical properties of such boundary films are very dependent on the process conditions, and are essentially a result of physico-chemical transformations of the colloid. Three types of films were compared: a film obtained by the drying of the base solvent, a film due to the compaction of the colloid between two steel surfaces, and a friction film obtained with this type of lubricant. Adsorption, compaction, and shear transformations induce a solid film. The pressure effect on the frictional behaviour of these colloidal films has been investigated using a surface force apparatus for low contact pressure (10⁴ to 10⁶ Pa), and using tribometers supporting heavy loads for the analysis of the high pressure domain. Above a critical pressure, evaluated at 10⁶ Pa, the colloidal film does not flow, but forms a compacted mattress sliding on the surface plane and squeezing a molecular layer of lubricant.     

Nitrogen fixation and productivity of winter annual legume cover crops in Upper Midwest organic cropping systems

Nutrient Cycling in Agroecosystems - Legume cover crops can play a valuable role in maintaining and increasing soil quality and nitrogen availability, but are infrequently grown in the Upper...     

Molecular characterization of Escherichia coli O157 contamination routes in a cattle slaughterhouse

In a cattle slaughterhouse, sampling was performed over a 1-week period to examine the prevalence and possible contamination routes of Escherichia coli O157. Each sampling day, swab samples were collected from the slaughterhouse environment before onset of slaughter, from the slaughterline, and from 20 successively slaughtered animals. Isolation of E. coli O157 consisted of a 6-hour enrichment followed by immunomagnetic separation and selective plating. From the 394 samples taken, 84 (21%) were positive for E. coli O157. Pulsed-field gel electrophoresis (PFGE) of collected isolates produced 26 different profiles, from which 5 PFGE profiles carried two or more Stx genes. The combination of PFGE profiles and Stx types resulted in 32 different E. coli O157 types. E. coli O157 was found in the slaughterhouse environment before the onset of slaughter. The first two sampling days, feces and carcasses were found negative. On the third sampling day, five fecal samples and four carcasses from animals negative in the feces were positive. Hide of the anal region and the shoulder were found positive every sampling day. The shoulder hide was more than twice as contaminated as the anal region hide. Typing of different isolates from a sample showed that frequently different E. coli O157 types were presented. On sampling days 1 and 2, types present in the environment and on the hides of the slaughtered animals differed. On the third sampling day, two dominant types were found in the environment (even before the onset of slaughter), as well as on the hides, feces, and carcasses. Although examined animals originated from different farms, one (two on day 3) dominant E. coli O157 type was present on their hides each sampling day. These data indicated that (i) the progress of contamination can differ from day to day within a slaughterhouse and (ii) contact between animals after the departure from the farm can have a large effect on the spread of E. coli O157 hide contamination.     

Modeling bread baking with focus on overall deformation and local porosity evolution

A two dimensional model of bread baking was developed including, for the first time, the dependence of dough viscosity on both temperature and moisture content, the carbon dioxide dissolved from liquid water together with gas generation from yeast at the beginning of baking and the shrinkage due to dough drying. Particular attention was paid to experimental validation of both overall and local variables such as local temperature, overall mass loss, and local moisture content, overall CO₂ released into the oven, and overall deformation and local expansion or shrinkage. Sensitivity studies on generation of carbon dioxide, gravity, and shrinkage are presented to discuss their influences on bread geometry, porosity (reflecting the alveolar structure) and gas pressure. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3847–3863, 2016     

Modelling of flocculation using a population balance equation

In this paper, a model based on a population balance equation (PBE) is developed. It aims at reproducing experimental floc size distributions obtained at steady state in a jar-test. The objective is to develop a simple model, based on physical phenomena, and that does not contain any adjustable parameters. Floc size distributions obtained using a part of a particle image velocimetry (PIV) device and image analysis are used to develop mathematical expressions for the aggregation and breakage kernels. A critical volume beyond which breakage is of significant importance is identified and related to the hydrodynamics. Hydrodynamic sequencing allows the distribution of the daughter particles resulting from a breakage event to be established. The model is finally successfully validated against experimental results.     

Concentration effects in the base-catalyzed hydrolysis of oligo(ethylene glycol)- and amine-containing methacrylic monomers

Concentration effects in the base-catalyzed hydrolysis of water-soluble methacrylates (3-(N,N-dimethylaminoethyl) methacrylate (DMAEMA), 2-hydroxyethyl methacrylate (HEMA) and oligo(ethylene glycol) methacrylates (OEGMAs)) have been studied. These monomers are rapidly hydrolyzed in the presence of bases at the room temperature in dilute aqueous solutions, but the reaction rate decreases sharply in highly concentrated solutions. A clear correlation was found between a form of the viscosity isotherm for DMAEMA solutions and the concentration dependence of the autocatalytic hydrolysis rate which indicates the connection of process kinetics with the structure of solutions. These data should be considered when carrying out homo- and copolymerization of the previously mentioned monomers in aqueous solutions.     

Microstructure Variation and Hardness Diminution During Low Cycle Fatigue of 55NiCrMoV7 Steel

 The influence of temperature and hardness level on the cyclic behavior of 55NiCrMoV7 steel, and the microstructure variation and hardness diminution during low cycle fatigue behavior were investigated. By means of SEM and XRD, the modality of carbides and the full width half maximum (FWHM) of martensite (211) [M(211)] of X ray diffraction spectrum in fatigue specimen were studied. The results showed that the cyclic stress response behavior generally showed an initial exponential softening for the first few cycles, followed by a gradual softening without cyclic softening saturation. The fatigue behavior of the steel is closely related to the hardness level. The hardness diminution and the variation of half width M(211) are remarkably influenced by the interaction between the cyclic plastic deformation and the thermal loading when the fatigue temperature exceeds the tempering temperature of the steel.     

Photobiomodulation Therapy and the Glymphatic System: Promising Applications for Augmenting the Brain Lymphatic Drainage System

The glymphatic system is a glial-dependent waste clearance pathway in the central nervous system, devoted to drain away waste metabolic products and soluble proteins such as amyloid-beta. An impaired brain glymphatic system can increase the incidence of neurovascular, neuroinflammatory, and neurodegenerative diseases. Photobiomodulation (PBM) therapy can serve as a non-invasive neuroprotective strategy for maintaining and optimizing effective brain waste clearance. In this review, we discuss the crucial role of the glymphatic drainage system in removing toxins and waste metabolites from the brain. We review recent animal research on the neurotherapeutic benefits of PBM therapy on glymphatic drainage and clearance. We also highlight cellular mechanisms of PBM on the cerebral glymphatic system. Animal research has shed light on the beneficial effects of PBM on the cerebral drainage system through the clearance of amyloid-beta via meningeal lymphatic vessels. Finally, PBM-mediated increase in the blood–brain barrier permeability with a subsequent rise in Aβ clearance from PBM-induced relaxation of lymphatic vessels via a vasodilation process will be discussed. We conclude that PBM promotion of cranial and extracranial lymphatic system function might be a promising strategy for the treatment of brain diseases associated with cerebrospinal fluid outflow abnormality.