Turbo-encoder design for symbol-interleaved parallel concatenatedtrellis-coded modulation

This paper addresses turbo-encoder design for coding with high spectral efficiency using parallel concatenated trellis-coded modulation and symbol interleaving. The turbo-encoder design involves the constituent encoder design and the interleaver design. The constituent encoders are optimized for symbol-wise effective free distance, and each has an infinite symbol-wise impulse response. We identify the canonical structures for the constituent encoder search space. In many cases of practical interest, the optimal structure for these constituent encoders connects the memory elements in a single row. This single row generally applies to turbo code constituent encoders for parallel concatenation and is not restricted to symbol interleaving. To lower the error floor, a new semi-random interleaver design criteria and a construction method extends the spread-interleaver concept introduced by Divsalar and Pollara (1995). Simulation results show that the proposed system employing symbol interleaving can converge at a lower signal-to-noise ratio than previously reported systems. We report simulation results between 0.5 and 0.6 db from constrained capacity for rates of 2 and 4 bits/s/Hz     

Wearable Technologies,Portable Architectures and the Vicissitudes of the Space Between

The omnipresence of the iPod and mobile phone has ensured portable and wearable technologies' highly privileged position in contemporary society. They are at the top of the pile where conspicuous consumption is concerned - you only have to visit an Apple store on a Saturday afternoon to witness the degree to which this highly sought-after gadgetry has become subject to consumer frenzy and speculation. Here, Despina Papadopoulos reviews the particular social and cultural impact of wearable devices. She also welcomes in a new generation of interactive designers who are investigating the human and emotional potential of emergent technologies. Copyright © 2007 John Wiley & Sons, Ltd.     

Fast and effective characterization for classification and similarity searches of 2D and 3D spatial region data

We propose a method for characterizing spatial region data. The method efficiently constructs a k-dimensional feature vector using concentric spheres in 3D (circles in 2D) radiating out of a region's center of mass. These signatures capture structural and internal volume properties. We evaluate our approach by performing experiments on classification and similarity searches, using artificial and real datasets. To generate artificial regions we introduce a region growth model. Similarity searches on artificial data demonstrate that our technique, although straightforward, compares favorably to mathematical morphology, while being two orders of magnitude faster. Experiments with real datasets show its effectiveness and general applicability.     

Evaluation of surface characteristics of dental composites using profilometry,scanning electron,atomic force microscopy and gloss-meter

The aim of this in vitro investigation was to compare various roughness and topography measurement methods to characterize the surface quality in several types of resin composites. The initial surface quality of several resin composites was compared. The materials evaluated were of three categories: i) hybrid: TPH Spectrum; ii) reinforced microfill: Micronew and iii) microhybrid: Synergy Duo, Esthet-X, Point.4 and Palfique Estelite. Three Groups of identical disk-shaped specimens (10 × 1.5 mm) were prepared from each material (n = 6) and polished with Soflex discs. Macro-roughness (Ra) was measured with Group 1 by 2-D profilometry. Atomic Force Microscopy (AFM) gave 3-D images and micro-roughness (Ra) of Group 2. Surface optical gloss at 60^∘ was determined for Group 3. Specimens of each material were also studied by scanning electron microscopy. Macro-Ra values (μm) ranged from 0.30 to 0.56. Micro-Ra values ranged from 0.03 to 0.14 and they differed from macro-Ra values in ranking order. Percentage Gloss values ranged from 30.6 to 70.1%. The results revealed that micro-roughness showed a high correlation with gloss values (r = 0.93), whilst macro-roughness did not (r = 0.62). Moreover, the AFM method showed higher capability to distinguish surface roughness compared with the 2-D profilometry and to reveal more detailed definition of surface texture than the examination under SEM.     

Thermal decomposition behavior,characterization and evaluation of pyrolysis products of agricultural wastes

Thermal decomposition behavior during pyrolysis, the composition and the physicochemical characteristics of the pyrolysis products were studied for four agricultural wastes from Southern Greece. These wastes are produced in abundance in the Mediterranean Region but still remain relatively unexploited, while there is also lack or little relevant scientific information. Pyrolysis process for the examined samples was studied using a TGA analyzer and a properly tested and calibrated TG/MS setup, at a heating rate of 10 °C/min up to 850 °C. Determination of important quantitative parameters of pyrolysis as a function of temperature, on an instantaneous or integral basis, and correlation of the evolved gas results with the degradation of pseudocomponents of raw biomass was made possible. The average higher heating value of the pyrolysis light gases was found to be in a satisfactory for energy purposes range of 11.2–14.4 MJ/Nm³. Furthermore, biochars produced at 450, 550 and 650 °C in a fixed bed reactor were found to exhibit calorific value ranging from 20.1 to 28.7 MJ/kg and structural stability. They were also found to have a high nutrients content and below limits or negligible heavy metals content for soils applications, regardless of production temperature.     

Storage stability and ageing effect of biodiesel blends treated with different antioxidants

This study investigates the impact of various synthetic phenolic antioxidants on the oxidation stability of biodiesel blends with the employment of the modified Rancimat method. The experimental results revealed that an improvement in oxidation stability could be achieved with all antioxidants tested. Butylated hydroxytoluene (BHT) and butylated hydroxyanisol (BHA) displayed the lowest effectiveness in neat biodiesel, whereas their use in biodiesel blends showed a greater stabilizing potential. Propyl gallate (PG) and pyrogallol (PA) additives showed the strongest effectiveness in both the neat biodiesel and the biodiesel blends. During a naturally ageing process of the biodiesel blends which was conducted for a period of 10 weeks, samples were taken every 2 weeks to measure the oxidation stability, kinematic viscosity and acid value. This process was designed in such manner to simulate the ageing of an automotive biofuel stored in the fuel tank of a vehicle. The results showed a sharp decrease in fuel stability over time. Although limited effects were observed in viscosity, the acid value was significantly increased over time. The addition of antioxidants resulted in some increases in viscosity and acid value of the biodiesel blends.     

Influence of electrochemical copolymerization conditions of 3‐methylthiophene and biphenyl on the morphology and nanomechanical properties of the films

The aim of this work is to synthesize novel 3‐methylthiophene (3MTh)/biphenyl (Biph) copolymer films by electropolymerization and study their mechanical properties through nanoindentation. The morphology, the chemical structure as well as the electrical conductivity of the copolymer films depended strongly on the electropolymerization conditions. It was found that the polymer deposition follow an instantaneous, two‐dimensional nucleation and growth mechanism leading to homogenous films. The copolymer films had higher Young modulus and nanohardness than poly(3‐methylthiophene) (3PMTh), indicating that the incorporation of Biph units within the P3MTh chain leads to a more densely packed structure and a more brittle polymer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42575.     

The Cardioprotective PKA-Mediated Hsp20 Phosphorylation Modulates Protein Associations Regulating Cytoskeletal Dynamics

The cytoskeleton has a primary role in cardiomyocyte function, including the response to mechanical stimuli and injury. The small heat shock protein 20 (Hsp20) conveys protective effects in cardiac muscle that are linked to serine-16 (Ser16) Hsp20 phosphorylation by stress-induced PKA, but the link between Hsp20 and the cytoskeleton remains poorly understood. Herein, we demonstrate a physical and functional interaction of Hsp20 with the cytoskeletal protein 14-3-3. We show that, upon phosphorylation at Ser16, Hsp20 translocates from the cytosol to the cytoskeleton where it binds to 14-3-3. This leads to dissociation of 14-3-3 from the F-actin depolymerization regulator cofilin-2 (CFL2) and enhanced F-actin depolymerization. Importantly, we demonstrate that the P20L Hsp20 mutation associated with dilated cardiomyopathy exhibits reduced physical interaction with 14-3-3 due to diminished Ser16 phosphorylation, with subsequent failure to translocate to the cytoskeleton and inability to disassemble the 14-3-3/CFL2 complex. The topological sequestration of Hsp20 P20L ultimately results in impaired regulation of F-actin dynamics, an effect implicated in loss of cytoskeletal integrity and amelioration of the cardioprotective functions of Hsp20. These findings underscore the significance of Hsp20 phosphorylation in the regulation of actin cytoskeleton dynamics, with important implications in cardiac muscle physiology and pathophysiology.