Metallic nanowire-graphene hybrid nanostructures for highly flexible field emission devices

We report a simple but efficient method to prepare metallic nanowire-graphene (MN-G) hybrid nanostructures at a low temperature and show its application to the fabrication of flexible field emission devices. In this method, a graphene layer was transferred onto an anodic alumina oxide template, and vertically aligned Au nanowires were grown on the graphene surface via electrodeposition method. As a proof of concept, we demonstrated the fabrication of flexible field emission devices, where the MN-G hybrid nanostructures and another graphene layer on PDMS substrates were utilized as a cathode and an anode for highly flexible devices, respectively. Our field emission device exhibited stable and high field emission currents even when bent down to the radius of curvature of 25 mm. This MN-G hybrid nanostructure should prove tremendous flexibility for various applications such as bio-chemical sensors, field emission devices, pressure sensors and battery electrodes.     

Host-guest chemistry in the gas phase: selected fragmentations of CB[6]-peptide complexes at lysine residues and its utility to probe the structures of small proteins

The gas phase host-guest chemistry between cucurbit[6]uril (CB[6]) and peptide is investigated using electrospray ionization mass spectrometry (ESI-MS). CB[6] exhibits a high preference to interacting with a Lys residue in a peptide forming a CB[6]-peptide complex. Collisionally activated CB[6] complexes of peptides yield a common highly selective fragment product at m/z 549.2, corresponding to the doubly charged CB[6] complex of 5-iminiopentylammonium (5IPA). The process involves the formation of an internal iminium ion, which results from further fragments to an a-type ion from a y-type ion, and the resulting 5IPA ion threads through CB[6]. Numerous peptides are investigated to test the generality of the observed unique host-guest chemistry of CB[6]. Its potential utility in probing protein structures is demonstrated using CB[6] complexes of ubiquitin. Low-energy collision induced dissociation yields CB[6] complex fragments, and further MS(n) spectra reveal details of the CB[6] binding sites, which allow us to deduce the protein structure in the solution phase. The mechanisms and energetics of the observed reactions are evaluated using density functional theory calculations.     

Fast release process of metal structure using chemical dry etching of sacrificial Si layer

An ultra-fast removal process of a silicon sacrificial layer for the selective release of a metal structure on a Si substrate was studied, which uses a chemical dry etching method. The chemical dry etching of a Si layer was performed in an NF₃ remote plasma with the direct injection of additive nitric oxide (NO) gas. When the NO gas was injected into the chamber into which F radicals were supplied from a remote plasma source using NF₃ input gas, the silicon layer was removed selectively and the metal structure could be released easily. It was found that the etch rate on the sidewall (up to ≅ 18.7 μm/min for an opening width of 100 μm) and the bottom (up to ≅ 24.5 μm/min for an opening width of 100 μm) depends on the NO/(NO + Ar) gas flow ratio, time duration, and opening width. The developed dry etching process could be used to release a Ni structure with near infinite selectivity in a very short time. The process is well suited for fabricating various devices which require a suspended structure, such as in radio-frequency microelectromechanical system switches, tunable capacitors, high-Q suspended inductors and suspended-gate metal-oxide semiconductor field-effect transistors.     

Optimization of a roller levelling process for Al7001T9 pipes with finite element analysis and Taguchi method

This paper is concerned with the optimization of process parameters for a roller leveller that is an indispensable piece of equipment to eliminate the undesirable curvature of a thin-walled aluminum pipe. Optimization of process parameters has been carried out for a multi-staggered-type 14-roller leveller. A finite element model of a multi-staggered 14-roller leveller was constructed for numerical analysis. The analysis is carried out with the fractional model and the Taguchi method for evaluation of the effect of process parameters such as the intermesh and the slanted angle of rollers. The response variable is set to the plastic strain along the pipe length. The optimum combination of process parameters is determined from the numerical result and confirmed by experiments. The comparison of the numerical result with the experimental one shows good coincidence for its validity and reliability.     

Adaptive Bit-Interleaved Coded OFDM With Reduced Feedback Information

If the channel is static and is perfectly known to both the transmitter and the receiver, the water-filling technique with adaptive modulation is known to be optimal (Gallager, 1968). However, for orthogonal frequency-division multiplexing (OFDM) systems, this requires intensive traffic overheads for reporting channel state information on all subcarriers to the transmitter. In this paper, we consider an adaptive modulation and coding scheme for bit-interleaved coded OFDM with reduced feedback information satisfying a specified quality of service level. We propose a rate adaptation scheme, which utilizes the estimated bit error rate for supportable transmission rates. In this scheme, a user equipment chooses a modulation and coding scheme (MCS) level, which can provide the maximum spectral efficiency based on one OFDM symbol rather than on all subchannels. Then the user needs to send back only the selected MCS level index. The proposed scheme does not require the water-filling procedure, and the amount of the feedback information reduces to a single integer value irrespective of the number of subcarriers. Simulation results show that the proposed scheme can significantly reduce the system complexity while minimizing the performance loss compared to the optimum water-filling scheme.     

Recrystallization and precipitation behavior of low-activation V-Cr-Ti alloys after cold rolling

Recrystallization and precipitation behavior after cold working were investigated for three V-4Cr-4Ti alloys, NIFS-HEAT-1, NIFS-HEAT-2 and US 832665, which contain different levels of impurities. The decrease in hardness and the initiation of recrystallization against test temperature do not depend on the oxygen level. However, the rate of grain growth decreased with the increase in the impurity levels. Bimodal distribution of the precipitates was observed after annealing at 1273 K. The large precipitates were Ti-rich precipitates, and the small ones were composed mainly of Ti, C and O (Ti-C-O precipitates). The impurities were dissolved from Ti-C-O precipitates above 1273 K, and the level of impurities in the matrix increased and resulted in the increase in the hardness. Based on the results, the annealing temperature for V-4Cr-4Ti alloys is recommended not to exceed 1273 K for the purpose of maintaining good mechanical properties such as tensile and impact properties.     

Direct extraction of an empirical temperature-dependent InGaP/GaAs HBT large-signal model

A new empirical InGaP/GaAs heterojunction bipolar transistor (HBT) large-signal model including self-heating effects is presented. The model accounts for the inherent temperature dependence of the device characteristics due to ambient-temperature variation as well as self-heating. The model is accompanied by a simple extraction process, which requires only dc current-voltage (I-V) and multibias-point small-signal S-parameter measurements. All the current-source model parameters, including the self-heating parameters, are directly extracted from measured forward I-V data at different ambient temperatures. The distributed base-collector capacitance and base resistance are extracted from measured S-parameters using a new technique. The extraction procedure is fast, accurate, and inherently minimizes the average squared-error between measured and modeled data, thereby eliminating the need for further optimization following parameter extraction. This modeling methodology is successfully applied to predict the dc, small-signal S-parameter, and output fundamental and harmonic power characteristics of an InGaP/GaAs HBT, over a wide range of temperatures.     

Changes in corneal epithelial barrier function after excimer laser photorefractive keratectomy

PURPOSE: To use fluorophotometry to measure corneal epithelial barrier function after excimer laser photorefractive keratectomy (PRK). SETTING: Seoul National University Hospital, Seoul, Korea. METHODS: Twenty-five eyes of 21 patients (13 women, 8 men) had PRK to correct myopia. Corneal epithelial healing time was measured and corneal epithelial permeability to sodium fluorescein evaluated by fluorophotometry 1, 2, and 3 weeks after surgery. RESULTS: Epithelial permeability showed a statistically significant increase 1 week after surgery and returned to its preoperative level 1 week later. Comparative studies according to epithelial healing day and corrected diopter showed results that were not statistically significant (P > .05). CONCLUSION: These results suggest that PRK delays complete reconstruction of corneal epithelial barrier function. In humans, the corneal epithelium regained its normal barrier function 2 weeks after PRK. Thus, at least during these weeks, care should be taken to minimize further epithelial trauma.     

Meta-analysis of the association of the Trp64Arg polymorphism in the beta3 adrenergic receptor with body mass index

AIMS: To investigate the relationship in patients with heart failure between BP response to the first dose of ACE inhibitor and (1) plasma drug concentration and (2) baseline clinical and laboratory variables. METHODS: We studied individual placebo-corrected BP responses to initiation of treatment with one of a number ACE inhibitor preparations in 132 patients with mild to moderate CHF. Various pharmacokinetic/pharmacodynamic models were compared. We assessed the strength of association between baseline physiological and laboratory variables and the BP response as assessed directly from the AUC(0,10 h) and indirectly from the slope of the PK/PD relationship. Predictive models for response variables were developing using regression analysis. RESULTS: BP response was primarily related to plasma drug concentration. The association between the fall in BP and baseline variables was weak. The strongest single predictor of BP response was baseline mean arterial pressure (r2 = 5.8%, P = 0.02). The best combinations of predictor variables contained mean arterial pressure, plasma renin activity, creatinine concentration and age (r2 = 14.4%, P = 0.37). When the choice of ACE inhibitor was added, the predictive power of the model increased (r = 23.6%, P < 0.01) but left the majority of the variability in response unexplained. CONCLUSIONS: The first-dose blood pressure response to ACE inhibition cannot be accurately predicted from baseline pathophysiological variables in patients with mild to moderate CHF. The choice of ACE inhibitor accounts for a small proportion of the variability in response but wide inter-individual variability exists in the response to each treatment.