Doped silicon and NIS junctions for bolometer applications

We discuss the performance, of a normal metal hot electron bolometer (NHEB) that we have measured at 0.3 K. We found that the noise equivalent power was limited by the amplifier noise. To improve the NHEB power response and to make it more robust and reliable we propose to substitute the normal metal with heavily doped silicon. The heavily doped silicon behaves like a metal with lower carrier concentration and has a smaller electron–phonon thermal coupling. We have fabricated superconductor-doped silicon-superconductor contacts (S-Sm-S) and we have used them as thermometers and coolers.     

碾压混凝土穿透型诱导缝不同扩展阶段的强度指标试验研究

在不同削弱度碾压混凝土轴拉试件的穿透型诱导缝周围粘贴了应变片，得到在不同应力状态下诱导缝应变发展规律为：在加载初期，离缝端不同距离的应变发展较为均匀，数值上相差不突出；随着荷载的增加，应变开始出现不均匀发展，离缝端越远，应变变化越缓慢；当接近最大荷载的阶段，缝端应变急速发展，试件瞬间断裂。应变从均匀发展变为不均匀发展，实质上隐含了诱导缝起裂、稳定发展、失稳断裂的整个过程，针对这一试验现象，结合断裂力学理论，建立了诱导缝不同开裂阶段的远场温度应力强度指标模型。     

基于μCLinux的NAT设备的设计与开发

NAT(网络地址翻译)技术有效地解决了IP地址紧缺的问题,为实现IPv4到IPv6的平滑过渡发挥了巨大的作用.在一个体积小、重量轻、价格低廉的嵌入式平台上实现NAT设备具有很好的实际意义.文中介绍了NAT技术的原理和实现过程,在自行设计的ARM7嵌入式硬件平台上基于μCLinux操作系统实现了NAT的功能,并通过实现其他相关功能,构建了完整的NAT设备,完成了小型网络接入Internet的方案.     

Inorganic–organic hybrid materials with zirconium oxoclusters as protective coatings on aluminium alloys

Inorganic–organic hybrid materials are attracting a strong scientific interest mainly for their outstanding inherent mechanical and thermal properties, which can be traced back to the intimate coupling of both inorganic and organic components. By carefully choosing the experimental parameters used for their synthesis, chemically and thermally stable acrylate-based hybrid material embedding the zirconium oxocluster Zr₄O₄(OMc)₁₂, where OMcCH₂C(CH₃)C(O)O, can be deposited as UV-cured films on aluminium alloys.

In particular, the molar ratios between the oxocluster and the monomer, the polymerisation time, the amount of photo-initiator and the deposition conditions, by using an home-made spray-coating equipment, were optimised in order to obtain the best performing layers in terms of transparency and hardness to coat aluminium alloy (AA1050, AA6060 and AA2024) sheets. Furthermore, it was also evaluated whether the hybrid coatings behave as barrier to corrosion.

Several coated samples were prepared and characterised. Environmental scanning electronic microscopy (ESEM) and scratch test were used to investigate the morphology of the films and to evaluate their scratch resistance, respectively. Electrochemical impedance spectroscopy (EIS) was performed in order to evaluate if the coatings actually protect the metallic substrate from corrosion.

In order to measure shear storage modulus (G′) and loss modulus (G″) of the materials used for coatings, bulk samples were also obtained by UV-curing of the precursors solution. Dynamical mechanical thermal analysis (DMTA) was performed in shear mode on cured disks of both the hybrid materials and pristine polymer for comparison. The values of T_g were read off as the temperatures of peak of loss modulus. The length and mass of all the samples were measured before and after the DMTA analysis, so that the shrinkage of the materials in that temperature range was exactly evaluated.     

Effect of Bonder at Skin/Core Interface on the Mechanical Performances of Sandwich Structures Used in Marine Industry

The present work is aimed to extend the knowledge of mechanical properties of sandwich structures used for marine applications focusing on the possibility to increase the performances of such structures by adding a bonder at the skin/core interface. Therefore, three sandwich structures that are utilised in different structural components of a yacht were realised by manual lay-up. The mechanical characterisation was performed by flatwise compressive, edgewise compressive and three point flexural tests. The tests execution has allowed both to determine the mechanical performances and to understand the fracture mechanisms that take place when the bonder is added in the stacking sequence of the samples.     

固定化微生物脱除工业酸性废气中H_2S的研究

以H 2软性填料作为氧化亚铁硫杆菌的固定化载体 ,构成了固定床生物反应器。在一定操作条件下 ,考察了固定床生物反应器对Fe2 +的氧化速率 ,最大可达 7.6 7g/ (L·h)。并对固定床生物反应器运行中在载体表面形成的络合物进行了研究 ,X射线衍射证明此络合物为黄钾铁矾 [KFe3(SO4 ) 2 (OH) 6]。     

油气田在用燃气轮机系统的热力学分析及改进建议

目前油气田在用的燃气轮机系统实际运行指标（热效率及火用效率）与设计数值相差很大，使燃气轮机系统的性能未能得到充分发挥，达不到预期的经济效益，限制了燃气轮机在油气田的进一步推广。为此，对油气田在用燃气轮机的运行特性进行分析，其主要问题是余热锅炉运行时间短、负荷率低。根据燃气轮机热电联产系统特点，给出了热力学分析（能量平衡分析和火用分析）方法、评价准则及计算公式。利用实测运行参数，对一油气田在用燃气轮机系统进行了运行工况下的热力学分析。测算分析结果表明，该系统运行效率偏离设计值较远，运行效率较低。在各子系统的能量损失分布中，余热锅炉能损系数最大；火用损分布中，燃烧室火用损系数最大，其次为余热锅炉，表明燃气轮机的燃烧室和余热锅炉为系统能量利用的薄弱环节，为重点改造对象。建议扩大集中供热范围、采用余热发电和循环蒸气回注等提高运行效率的措施。     

介孔氧化铁对正辛醇乙氧基化反应的催化性能

以十二烷基磺酸钠为模板剂、乙二胺为碱性介质,将水热法合成的氧化铁/十二烷基磺酸钠复合中孔材料在550℃、空气气氛中煅烧10h,除去模板剂,得到介孔氧化铁。通过X射线衍射、氮气吸附-脱附方法对介孔氧化铁的晶体结构和表面物性进行表征。表征结果显示,煅烧后的介孔氧化铁具有典型的六方介孔的结构特征,平均孔径为5.4nm。将介孔氧化铁用于催化正辛醇乙氧基化反应,研究结果表明,升高反应温度和初始压力、增加催化剂用量,可加快环氧乙烷的反应速率,同时产物的相对分子质量分布较窄。当平均聚合度为6.5时,正辛醇聚氧乙烯醚相对分子质量分布的选择性系数达到21.1。     

服装结构构成方法比较及新方法的生成

从不同服装结构构成方法的原理、特点、应用结果等方面分析比较，探讨了不同服装结构构成方法的科学性，提出在实践中应将不同服装结构构成方法优势互补，灵活运用，进而提出以建立服装结构设计经验数据库为桥梁，将不同服装结构构成方法有机连接起来的服装结构设计新方法，突破我国服装教育瓶颈，创建民族服装品牌。