Beam profile measurement of a solar-pumped iodine laser

Beam profile measurements have been made as a function of time within the laser pulse and C2F5I pressure. Measurements indicate that the profile is determined directly by the optical excitation volume, produced by the solar simulator, and that media distortion plays a minor role compared to the build up of quenching species during the lasing pulse.     

Site occupations and ordering behaviour of O phase in Ti2AlNb—based intermetallics

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｏｒｔｈｏｒｈｏｍｂｉｃａｌｌｏｙｓａｒｅｏｆｇｒｅａｔｔｅｃｈ ｎｏｌｏｇ ｉｃａｌｉｎｔｅｒｅｓｔｉｎｈｉｇｈｔｅｍｐｅｒａｔｕｒｅａｐｐｌｉｃａｔｉｏｎｓｓｉｎｃｅｔｈｅｙｈａｖｅａｇｏｏｄｂａｌａｎｃｅａｍｏｎｇｓｔ     

Initial stages of tin electrodeposition from sulfate baths in the presence of gluconate

Tin electrodeposition in its initial stages in acid sulfate/gluconate baths was studied with varying tin and gluconate concentrations using potential-controlled electrochemical techniques. The deposit morphology was observed by scanning electron microscopy (SEM). A comparison with tin electrodeposition from acid sulfate baths in the absence of gluconate was also carried out. Use of a highly acidic bath leads to nonuniform deposits, even in the presence of gluconate; at pH 4 deposits are uniform, brilliant and suitable for finishing applications. Tin crystallites have a well defined morphology which depends on bath agitation conditions. In the absence of agitation, the crystallites have the same tetragonal shape as in a sulfate bath without gluconate.     

Experiments with flame guncreting of basic refractories

Conclusions A laboratory installation for flame guncreting was designed, built, and tested. A method was developed for flame guncreting of basic refractories. The guncreted layer obtained as a result of flame guncreting is formally bonded with the refractory, and in its density and structure, is significantly better than it.Translated from Ogneupory, No.2, pp.54–57, February, 1967.     

Elongational viscosity of microbead suspensions

A ‘tubeless syphon’ was used as an elongational viscometer for the purpose of measuring elongational viscosities of glass bead suspensions in dilute polymer solutions. It was found that while the shear viscosities increased, the elongational viscosities decreased very sharply with increasing bead concentration. The conclusions from the present data are then compared with the observed changes in the elastic properties of two phase molten polymer systems. A double shift procedure has been successfully adopted to correlate the experimental data.     

New catalyst systems for the polymerization of acetylene

The catalytic activities of WCI₆Ph₄Sn, MoCl₅Ph₄Sn and tetrabenzyltitanium were examined in the polymerization of acetylene. The structure, morphology and electrical conductivity of the doped and non doped polyacetylene were also studied.     

Processing and Properties of Particulate Composites from Coated Powders

A method is described for sintering of highly loaded (≤20 vol%) alumina matrix/silicon carbide whisker or platelet composites to closed porosity. The method uses controlled heterogeneous precipitation in a suspension of whiskers or platelets. The suspension-coated particles are calcined to produce a free-flowing composite powder which can be hot-pressed or free-sintered to high density. The results of consolidation and mechanical property testing are reported.     

Non-markovian diffusion processes in polymers and a stretched exponential relaxation constitutive equation

Non-Markovian diffusion transport in polymers was studied. Applying the results of various researchers, a stretched exponential relaxation function was obtained and a linear viscoelastic constitutive equation formulated. Frequency dependent material functions, obtained from this constitutive equation were studied and the results successfully compared with experimental data for polyethylene oxide solutions. Sorption kinetics in a polymeric film were also studied. © 1994 John Wiley & Sons, Inc.