A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.     

Effect of surface-modifying macromolecules and solvent evaporation time on the performance of polyethersulfone membranes for the separation of chloroform/water mixtures by pervaporation

Polyethersulfone (PES) membranes using different evaporation periods were fabricated by the phase-inversion method. Pervaporation experiments were conducted for chloroform/water mixtures to determine the selectivity of the PES membranes. It was found that chloroform could be concentrated in the permeate from chloroform/water binary feed mixtures by PES membranes prepared using longer evaporation periods, and that the selectivity of PES membranes in pervaporation could be reversed by shorter evaporation periods. This study also showed that by adding surface-modifying macromolecules (SMM) up to 1 wt % into the casting solution, chloroform enrichment in the permeate could be increased by 50%. Chloroform enrichment increased with increasing SMM concentration until an optimal value, after which the enrichment decreased. © 1994 John Wiley & Sons, Inc.     

Total and acid-soluble fluoride content of infant cereals, beverages and biscuits from Brazil

Total fluoride (TF) and HCl 0.01 M ('gastric juice')-soluble fluoride (SF) were analysed in infant foods, beverages and calcium-rich biscuits. Samples were divided into seven categories: children cereals (A), chocolate-flavoured milk (B), soy beverages (C), filled biscuits (D), non-filled biscuits (E), wafer biscuits (F) and corn starch biscuits (G). Mean TF concentrations ± SD (amplitude, unit µg F ml^-1 or µg F g^-1) were: (A) 4.25 ± 3.04 (0.20 - 7.84, n = 6); (B) 0.34 ± 0.47 (0.05-1.27, n = 6); (C) 0.15 ± 0.07 (0.09-0.29, n = 8); (D) 8.44 ± 1.76 (7.65-10.47, n = 4); (E) 12.41 ± 1.15 (10.69-13.68, n = 4); (F) 0.35 ± 0 (0.34-0.36, n = 4) and (G) 7.77 ± 1.12 (6.86-8.68, n = 2). Five samples of cereals, one sample of chocolate-flavoured milk and 10 samples of biscuits were analysed for SF. In cereals analysed for SF, all fluoride was soluble, while for the chocolate-flavoured milk, approximately 50% of TF was soluble. Regarding the biscuits analysed for SF approximately 20% of TF was soluble. It was observed that some of the cereals and beverages, and most of the biscuits analysed, might be important contributors to total daily fluoride intake. When consumed just once per day, cereals and beverages might supply up to 25% of the maximum recommended daily fluoride intake (0.07 mg F kg^-1 body weight) for a 2-year-old child (12 kg). For the filled, non-filled and corn starch biscuits, when 3, 32 or 20 units of them, respectively, are consumed just once per day, they may supply up to 16% of the maximum recommended daily fluoride intake. However, only approximately 25% of fluoride absorption occurs from the stomach and 75% from the small intestine. Therefore, a higher fluoride bioavailability is possible.     

Continuous hydrogen evolution from cyclohexanes over platinum catalysts supported on activated carbon fibers

The continuous production of hydrogen from cyclohexanes is achieved effectively using Pt/ACF (ACF = activated carbon fiber) catalysts in a fixed-bed flow reactor. The Pt catalysts are more effective than a Pd/ACF catalyst for the reaction. Besides cyclohexane, methylcyclohexane, 1,4-dimethylcyclohexane, and p-menthane can also be employed as hydrogen source in the reaction system.     

Genotoxic effect of Physalis angulata L. (Solanaceae) extract on human lymphocytes treated in vitro

Physalis angulata L (Solanaceae) is a medicinal plant from North of Brazil, whose different extracts and infusions are commonly used in the popular medicine for the treatment of malaria, asthma, hepatitis, dermatitis and rheumatism. However, the genotoxic effects of P. angulata on human cells is not well known. The main purpose of the present study was to evaluate the in vitro genotoxic effects of aqueous extract of P. angulata using the comet assay and the micronucleus assay in human lymphocytes provided from 6 healthy donors. Treatments with P. angulata extracts were performed in vitro in order to access the extent of DNA damage. The comet assay has shown that treatments with P. angulata at 0.5, 1.0, 2.0, 3.0 and 6.0 microg/mL in culture medium were genotoxic. Lymphocytes treated with P. angulata at the concentrations of 3.0 and 6.0 microg/mL in culture medium showed a statistically significant increase in the frequency of micronucleus (p<0.05), however, the cytokinesis blocked proliferation index (CBPI) was not decreased after P. angulata treatment. In conclusion, the present work demonstrated the genotoxic effects of P. angulata extract on human lymphocytes in vitro.     

Structural and surface properties of thermally prepared Ti/RhxTi(1−x)Oy electrodes: I—influence of preparation parameters

Electrodes of Rh_xTi_(1−x)O_y nominal composition were prepared by thermal decomposition of the chloride or nitrate precursor salts dissolved in strongly acidic medium and applied by brush to both sides of a Ti° support. A systematic study of the influence of calcination temperature and time as well as oxygen flux was conducted. The coatings were characterised by SEM, EDAX, XRD, open circuit potential measurements and cyclic voltammetry (CV). Visible-ultraviolet spectrophotometry was employed to identify the chemical form of the precursor in solution while thermogravimetric analysis (TGA) was used to assess the decomposition temperature ranges. Optimisation of the coating preparation parameters showed coatings obtained from [Rh(H₂O)₆](NO₃)₃ precursor dissolved in HNO₃ 1:2 (v/v) and fired at 430 °C for 2 h in a 5 l min⁻¹ oxygen stream-furnished stable electrodes having the highest electrochemically active surface area.     

Risk stratification using the Society of Thoracic Surgeons Program

In an era of progressive cost containment and public scrutiny, the wisdom of aggressive surgical therapy for high-risk candidates has been questioned. At our center in the previous 24 months, 728 patients with coronary artery disease were entered into The Society of Thoracic Surgeons national database, and the hospital outcomes plus length of stay were analyzed. Patients were separated according to the predicted mortality based on the groupings in The Society of Thoracic Surgeons database: 0 to 5% (453 patients); 5% to 10% (126 patients); 10% to 20% (96 patients); 20% to 30% (17 patients); and 30% and greater (36 patients). There was a close correlation with the predicted rates of mortality. Importantly, the preoperative risk stratification demonstrated a strong correlation with the significant morbidity and excessive length of stay in the highest-risk groups (predicted risk of 20% to > or = 30%). The incidences of the most common complications in the group with the highest predicted risk (> or = 30%) were 28%, renal failure; 33%, ventilator dependence; and 17%, cardiac arrest. In addition, at short-term follow-up (6 to 8 months), a 24.3% mortality was identified in patients with a predicted mortality that exceeded 20%. These data quantify the risks and morbidities associated with the care of seriously ill patients with coronary artery disease and demonstrate the need for professional and public discussions focusing on the association of a high preoperative risk status and the consumption of resources.     

Penicillin vs. erythromycin in the treatment of diphtheria

PURPOSE: To review the University of Florida experience in treating ependymomas, analyze prognostic factors, and provide treatment recommendations. METHODS AND MATERIALS: Forty-one patients with ependymoma and no metastases outside the central nervous system received postoperative radiotherapy with curative intent between 1966 and 1989. Ten patients had supratentorial lesions, 22 had infratentorial lesions, and 9 had spinal cord lesions. All patients had surgery (stereotactic biopsy, subtotal resection, or gross total resection). Most patients with high-grade lesions received radiotherapy to the craniospinal axis. Low-grade intracranial lesions received more limited treatment. Spinal cord lesions were treated using either partial spine or whole spine fields. RESULTS: Of 32 intracranial tumors, 21 recurred, all at the primary site; no spinal cord tumors recurred. Overall 10-year survival rates were 51% (absolute) and 46% (relapse-free); by tumor site: spinal cord, 100%; infratentorial, 45%; supratentorial, 20% (p = 0.002). On multivariate analysis, tumor site was the only factor that influenced absolute survival (p = 0.0004); other factors evaluated included grade, gender, age, duration of symptoms, resection extent, primary tumor dose, treatment field extent, surgery-to-radiotherapy interval, and days under radiotherapy treatment. CONCLUSIONS: Patients with supratentorial or infratentorial tumors receive irradiation, regardless of grade. Craniospinal-axis fields are used when spinal seeding is radiographically or pathologically evident. Spinal cord tumors are treated using localized fields to the primary site if not completely resected. Failure to control disease at the primary site remains the main impediment to cure.