Biomechanical assessment of new hand-powered pruning shears

The aim of the study was to assess the biomechanical strains on the hand-wrist system during grapevine pruning with newly designed pruning shears. Surface electromyography of the finger flexor muscle and wrist postures were analyzed in four vineyard workers during actual work with the new and reference hand-powered pruning shears. Due to the large inter-individual differences in biomechanical data observed with both pruning shears, no systematic effect of the new pruning shears on "extreme" flexion/extension (F/E) and ulnar/radial (U/R) wrist deviations was demonstrated. However, the use of the new pruning shears was associated with a higher frequency of "neutral and moderate" U/R deviations (U/R < 20%(max)) and, to a lesser extent, of "neutral and moderate" F/E deviations (F/E < 20%(max)). Due to the small sample of workers, this result must be confirmed in a larger population of vineyard workers.     

Authentication in wireless networks: state of the art and integration with smart card

Wirelesslan have spread very quickly over the past few years. Demand for wireless access tolans has raised due to new mobile computing devices, such as laptops and personal digital assistants, and a desire for seamless and permanent connections to networks. Nevertheless a lot of security issues remain and stop its deployment in corporations. One of the most important issues is the authentication of a terminal to an Access Point. We propose an interface to integrate the Extensible Authentication Protocol into smart cards and will show that smart cards could constitute the de-facto device for authentication in Wirelesslan as they are forgsm and will be forumts (Universal Mobile Telecommunication System).     

Transcutaneous Blood Flow Measurements Using Pseudorandom Noise Doppler System

In order to obviate the limitations of the conventional coherent ultrasonic Doppler flowmeters we have developed a new device. In this apparatus the continuous wave is replaced by a pseudorandom signal. We show, both theoretically (Waag et al. [12]) and experimentally, that the pseudorandom system offers advantages. The most important result concerns the improvement of the signal-to-noise ratio which can be as large as 20 dB. Furthermore, it is possible to decrease the frequency and the distance ambiguity by a factor of two. Compared to the "random noise flowmeter" (Newhouse et al. [7], Jethwa et al. [5]) our system measures flow near the wall of vessels or in ultrasonic field in which there are important fixed echoes. To illustrate the feasibility of this new device, we show some results obtained by the transcutaneous method.     

Synthesis and characterization of olivine LiNiPO4 for aqueous rechargeable battery

LiNiPO₄ belongs to a family of olivine type compounds, with members LiMPO₄ where M = Fe, Mn, Co or Ni are transition metals. The lithium nickel phosphate was prepared and characterized in order to evaluate a new potential cathode material for our ongoing research in aqueous rechargeable batteries. Annealing the final product is critical in obtaining the stoichiometric LiNiPO₄ pure phase; conventional cooling to a room temperature leads to an indication of Li₃PO₄ and NiO secondary phases as impurities. The synchrotron infrared radiation (SR-IR) as a source for IR spectroscopy pins down the differences in the chemical bonding for annealed and conventional cooled LiNiPO₄ samples. The cyclic voltammetric and galvanostatic studies showed annealed LiNiPO₄ is electrochemically active from which lithium ions can be de-intercalated during oxidation process leading to an amorphous NiPO₄ and a minor product of nickel(II) hydroxide (β-NiOOH). During subsequent reduction, lithium ions are not fully intercalated, however, the structure is reversible and adequate for multiple cycles. The high potential in LiNiPO₄ looks to be very attractive in terms of high energy density, given the efficiency is improved.     

Optimisation de l'hydrolyse des protéines du lactosérum en utilisant des détergents commerciaux enzymatiques et non-enzymatiques

The main aim of this study is to characterize the effect of some commercial detergents on whey proteins in order to select an efficient detergent to clean inorganic membranes fouled during the process of whey proteins fractionation. The influence of such variables such as time, pH, temperature, type and detergent concentration on the rate of protein hydrolysis has been established. Also, the nature and size of produced peptides have been determined. The most efficient values of cleaning parameters have been obtained by using the enzymatic detergent P3-Ultrasil 62.     

Analysis of the Shrinkage Effect on Mass Transfer During Convective Drying of Sawdust/Sludge Mixtures

Convective drying of wastewater sludges and sawdust/sludge mixtures was studied. The first part of this work was an experimental study performed in a cross-flow convective dryer using 500 g of wet material extruded through a disk with circular dies of 12 mm. The results showed that the sawdust addition has a positive impact on the drying process from a mass ratio of 2/8, on a dry basis, with observed drying rates higher than the original sludge. The second part of this work consisted of developing a drying model in order to identify the internal diffusion coefficient and convective mass transfer coefficient from the experimental data. A comparison was made between fitted drying curves, well represented by the Newton's model, and the analytical solutions of the diffusion equation applied to a finite cylinder. Variations of dimensional characteristics, such as the volume and exchange surface of the sample bed, were obtained by X-ray tomography. This technique allowed us to confirm that shrinkage, which is an important phenomenon occurring during sludge and sawdust/sludge mixture drying, must be taken into account. The results showed that both the internal diffusion coefficient and convective mass transfer coefficient were affected by mixing and sawdust addition. The internal diffusion coefficient changed from 7.77 × 10^?9 m²/s for the original sludge to 7.01 × 10^?9 m²/s for the mixed sludge and then increased to 8.35 × 10^?9 m²/s for the mixture of a mass ratio of 4/6. The convective mass transfer coefficient changed from 9.70 × 10^?8 m/s for the original sludge to 8.67 × 10^?8 m/s for the mixed sludge and then increased to 12.09 × 10^?8 m/s for the mixture of a mass ratio of 4/6. These results confirmed that sawdust addition was beneficial to the sludge drying process as the mass transfer efficiency between the air and material increased. Reinforcing the texture of sludge by adding sawdust can increase the drying rate and decrease the drying time, and then the heat energy supply will be reduced significantly. The study also showed that neglecting shrinkage phenomenon resulted in an overestimation for the internal diffusion coefficient for the convective drying of sludges and sawdust/sludge mixtures.     

Neural approach for temperature‐dependent modeling of GaN HEMTs

Gallium nitride high electron‐mobility transistors have gained much interest for high‐power and high‐temperature applications at high frequencies. Therefore, there is a need to have the dependence on the temperature included in their models. To meet this challenge, the present study presents a neural approach for extracting a multi‐bias model of a gallium nitride high electron‐mobility transistors including the dependence on the ambient temperature. Accuracy of the developed model is verified by comparing modeling results with measurements. Copyright © 2014 John Wiley & Sons, Ltd.