Compact and unified hardware architecture for SHA-1 and SHA-256 of trusted mobile computing

This paper presents a compact and unified hardware architecture implementing SHA-1 and SHA-256 algorithms that is suitable for the mobile trusted module (MTM), which should satisfy small area and low-power condition. The built-in hardware hash engine in a MTM is one of the most important circuit blocks and dominates the performance of the whole platform because it is used as a key primitive to support most MTM commands concerning to the platform integrity and the command authentication. Unlike the general trusted platform module (TPM) for PCs, the MTM, that is to be employed in mobile devices, has very stringent limitations with respect to available power, circuit area, and so on. Therefore, MTM needs the spatially optimized architecture and design method for the construction of a compact SHA hardware. The proposed hardware for unified SHA-1 and SHA-256 component can compute a sequence of 512-bit data blocks and has been implemented into 12,400 gates of 0.25 μm CMOS process. Furthermore, in the processing speed and power consumption, it shows the better performance in comparison with commercial TPM chips and software-only implementation. The highest operation frequency and throughput of the proposed architecture are 137 MHz and 197.6 Mbps, respectively, which satisfy the processing requirement for the mobile application.     

Low level light therapy by Red–Green–Blue LEDs improves healing in an excision model of Sprague–Dawley rats

There are many methods of healing wounds. Among these, light therapy is reported to be beneficial, as beams assist the human body in treating, sterilizing, and regenerating cells. Both Laser and LED irradiation with specific wavelengths induce proliferation of fibroblasts depending on the wound area or wavelength and are effective in wound healing. This study used 8-week-old 250–300 g Male Sprague–Dawley Rats (ILAR Code: NTacSam:SD). The experiment was carried out for the non-irradiation group and the Red–Green–Blue LEDs irradiation groups (n of each group = 5). The experiment animals were relieved for 24 h after wounds had been excised and then the Red–Green–Blue LEDs irradiation groups were given irradiation therapy over 9 days 1 h per day. Immunohistochemical staining was conducted for cytokeratin in order to precisely measure the defect size. Also, Masson’s trichrome staining was conducted for comparison of collagen between the Red–Green–Blue LEDs irradiation groups and the non-irradiation group. Animals treated with Blue LEDs irradiation (p < 0.05), Green LEDs irradiation (p < 0.05), and Red LEDs irradiation (N.S.) healed at a faster rate than non-irradiated group. The LEDs irradiated groups also had more collagen, according to Masson’s trichrome staining for collagen analysis. The Red–Green–Blue LEDs irradiation had a beneficial effect on wound healing and could probably replace low power laser treatment.     

PASU: A personal area situation understanding system using wireless camera sensor networks

In this paper, we present a personal area situation understanding (PASU) system, a novel application of a smart device using wireless camera sensor networks. The portability of a PASU system makes it an attractive solution for monitoring and understanding the current situation of the personal area around a user. The PASU system allows its user to construct a 3D scene of the environment and view the scene from various vantage points for better understanding of the environment. The paper describes the architecture and implementation of the PASU system addressing limitations of wireless camera sensor networks, such as low bandwidth and limited computational capabilities. The capabilities of PASU are validated with extensive experiments. The PASU system demonstrates the potential of a portable system combining a smart device and a wireless camera sensor network for personal area monitoring and situation understanding.     

Review of a pivotal Human Factors article: "Humans and automation: use, misuse, disuse, abuse"

OBJECTIVE: This paper considers the influence of "Humans and Automation: Use, Misuse, Disuse, Abuse" and examines how it relates to the evolving issue of human-automation interaction. BACKGROUND: Automation presents important practical challenges that can dramatically affect satisfaction, performance, and safety; philosophical challenges also arise as automation changes the nature of work and human cognition. METHOD: Papers cited by and citing "Humans and Automation" were reviewed to identify enduring and emerging themes in human-automation research. RESULTS: "Humans and Automation" emerges as an important node in the network of automation-related papers, citing many and being cited by many recent influential automation-related papers. In their article, Parasuraman and Riley (1997) integrated previous research and identified differing expectations across designers, managers, and operators regarding the need to support operators as a source of automation problems. They also foresaw and inspired research that addresses problems of overreliance and underreliance on automation. CONCLUSION: This pivotal article and associated research show that even though automation seems to relieve people of tasks, automation requires more, not less, attention to training, interface design, and interaction design. The original article also alludes to the emergence of vicious cycles and dysfunctional meta-control. These problems reflect the coevolution of automation and humans, in which both adapt to the responses of the other. APPLICATION: Understanding this coevolution has important philosophical implications for the nature of human cognition and practical implications for satisfaction, performance, and safety.     

HOM4PS-2.0: a software package for solving polynomial systems by the polyhedral homotopy continuation method

HOM4PS-2.0 is a software package in FORTRAN 90 which implements the polyhedral homotopy continuation method for solving polynomial systems. It updates its original version HOM4PS in three key aspects: (1) new method for finding mixed cells, (2) combining the polyhedral and linear homotopies in one step, (3) new way of dealing with curve jumping. Numerical results show that this revision leads to a spectacular speed-up, ranging up to 1950s, over its original version on all benchmark systems, especially for large ones. It surpasses the existing packages in finding isolated zeros, such as PHCpack (Verschelde in ACM Trans Math Softw 25:251–276, 1999), PHoM (Gunji et al. in Computing 73:57–77, 2004), and Bertini (Bates et al. in Software for numerical algebraic geometry. Available at http://www.nd.edu/~sommese/bertini), in speed by big margins.     

Fifty years of driving safety research

OBJECTIVE: This brief review covers the 50 years of driving-related research published in Human Factors, its contribution to driving safety, and emerging challenges. BACKGROUND: Many factors affect driving safety, making it difficult to assess the impact of specific factors such as driver age, cell phone distractions, or collision warnings. METHOD: The author considers the research themes associated with the approximately 270 articles on driving published in Human Factors in the past 50 years. RESULTS: To a large extent, current and past research has explored similar themes and concepts. Many articles published in the first 25 years focused on issues such as driver impairment, individual differences, and perceptual limits. Articles published in the past 25 years address similar issues but also point toward vehicle technology that can exacerbate or mitigate the negative effect of these issues. Conceptual and computational models have played an important role in this research. CONCLUSION: Improved crash-worthiness has contributed to substantial improvements in driving safety over the past 50 years, but future improvements will depend on enhancing driver performance and perhaps, more important, improving driver behavior. Developing models to guide this research will become more challenging as new technology enters the vehicle and shifts the focus from driver performance to driver behavior. APPLICATION: Over the past 50 years, Human Factors has accumulated a large base of driving-related research that remains relevant for many of today's design and policy concerns.     

Clustering high dimensional data: A graph-based relaxed optimization approach

There is no doubt that clustering is one of the most studied data mining tasks. Nevertheless, it remains a challenging problem to solve despite the many proposed clustering approaches. Graph-based approaches solve the clustering task as a global optimization problem, while many other works are based on local methods. In this paper, we propose a novel graph-based algorithm “GBR” that relaxes some well-defined method even as improving the accuracy whilst keeping it simple. The primary motivation of our relaxation of the objective is to allow the reformulated objective to find well distributed cluster indicators for complicated data instances. This relaxation results in an analytical solution that avoids the approximated iterative methods that have been adopted in many other graph-based approaches. The experiments on synthetic and real data sets show that our relaxation accomplishes excellent clustering results. Our key contributions are: (1) we provide an analytical solution to solve the global clustering task as opposed to approximated iterative approaches; (2) a very simple implementation using existing optimization packages; (3) an algorithm with relatively less computation time over the number of data instances to cluster than other well defined methods in the literature.     

Robust fuzzy stabilization of dithered chaotic systems using island-based random optimization algorithm

Applying dither to highly nonlinear systems may suppress chaotic phenomena, but dynamic performance, such as convergence rate and disturbance attenuation, is usually not guaranteed. This paper presents a dithered H_∞ robust fuzzy control scheme to stabilize chaotic systems that ensures disturbance attenuation bounds. In the proposed scheme, Takagi-Sugeno (T-S) fuzzy linear models are used to describe the relaxed models of the dithered chaotic system, and fuzzy controllers are designed based on an extension to the concept of parallel distributed compensation (PDC). Sufficient condition for the existence of the H_∞ robust fuzzy controllers is presented in terms of a novel linear matrix inequalities (LMI) form which takes full consideration of modeling error and disturbances, but cannot be solved by the standard procedures. In order to solve the LMI problem and to identify the chaotic systems as T-S fuzzy modes, we propose a compound optimization strategy called the island-based random-walk algorithm (IRA). The algorithm is composed of a set of communicating random-walk optimization procedures concatenated with the down-hill simplex method. The design procedure and validity of the proposed scheme is demonstrated via numerical simulation of the dithered fuzzy control of a chaotic system.     

Application of load balancing based on symmetric balanced incomplete block design to random networks

In a load balancing algorithm [O. Lee, M. Anshel, I. Chung, Design of an efficient load balancing algorithm on distributed networks by employing symmetric balanced incomplete block design, IEE Proceedings - Communications 151 (6) (2004) 535-538] based on the SBIBD (Symmetric Balanced Incomplete Block Design), each node receives global workload information by only two round message exchange with traffic overhead, where v is the number of nodes. It is very efficient and works well only when v=p²+p+1 is used for a prime number p. In this paper, we generated a special incidence structure using the SBIBD and then propose a new load balancing algorithm, which executes well for an arbitrary number of nodes. To accomplish this, we add a number of links to nodes in order for each node to receive more than 80% of the workload information by two round message exchange. For performance of our algorithm, we carried out an experiment for the number of nodes, w, which was up to 5000. Traffic overhead is less than in a round and standard deviation of traffic overhead shows that each node has a mostly well-balanced amount of traffic.     

Maximum-likelihood registration of range images with missing data

Missing data are common in range images, due to geometric occlusions, limitations in the sensor field of view, poor reflectivity, depth discontinuities, and cast shadows. Using registration to align these data often fails, because points without valid correspondences can be incorrectly matched. This paper presents a maximum likelihood method for registration of scenes with unmatched or missing data. Using ray casting, correspondences are formed between valid and missing points in each view. These correspondences are used to classify points by their visibility properties, including occlusions, field of view, and shadow regions. The likelihood of each point match is then determined using statistical properties of the sensor, such as noise and outlier distributions. Experiments demonstrate a high rates of convergence on complex scenes with varying degrees of overlap.