顺酐回收技术及发展趋势

顺酐是一种重要的有机化工原料，对国内外顺酐生产工艺中回收技术的发展进行了系统回顾。介绍了部分冷凝技术和水吸收技术的发展，详细介绍了以邻苯二甲酸酯、脂环酸酯和醇3类有机溶剂为主的有机溶剂回收技术的发展。并且结合对目前广泛应用的顺酐回收技术的分析比较，提出了国内外顺酐回收技术的发展趋势以供我国发展顺酐工业之参考。     

基于硬件Kalman滤波器的航拍云台姿态获取

航拍云台姿态获取是航空摄影中相机姿态校正的基本依据,介绍了一种基于硬件Kalman滤波器的航拍云台姿态获取的实现方法。设计中采用MPU6050作为系统的姿态传感器,它提供三轴角速度和三轴加速度数据。根据系统特征建立Kalman滤波方程对这些数据进行数据融合处理,Kalman滤波过程中的加减乘除浮点数运算由FPGA实现,外部数据的采集和时序的控制也由FPGA完成。经过对实际数据的处理实验,得出该硬件模块可以获得较为准确的航拍云台姿态,输出结果误差在-1.5°~1.5°范围内。     

Water sorption of poly(vinyl alcohol)/ poly(diallyldimethylammonium chloride) interpenetrating polymer network hydrogels

Temperature‐responsive interpenetrating polymer network (IPN) hydrogels constructed with poly(vinyl alcohol) and poly(diallyldimethylammonium chloride) using the sequential IPN method were studied. The characteristics of IPN hydrogels were investigated using the dynamic vapor sorption system. IPN hydrogels exhibited a relatively high sorption ratio, 180–360% at room temperature. The sorption ratio of hydrogels depended on temperature. Diffusion coefficients were calculated according to the Fickian Law at several temperatures. The apparent activation energy was 5.43 kJ mol^?1, which corresponds to typical diffusion processes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1389–1392, 2003     

D301树脂分离衣康酸的工艺研究

采用弱碱性阴离子交换树脂Ｄ３０１对发酵法生产的衣康酸进行了分离研究。通过静态交换实验，研究了Ｄ３０１树脂对衣康酸的静态交换动力学，确定了传质机制和影响因素；通过动态交换实验，研究了以硫酸为洗脱剂，以氨水为再生剂的工艺过程，确定了主要工艺参数。     

均分散TiO2纳米晶的制备及应用研究进展

介绍了不同晶形TiO2纳米晶的制备、应用;对TiO2纳米晶的合成方法以及相关材料的应用进展,尤其是均分散TiO2纳米晶的制备技术进行了综述。     

Pb2+ binding by polyaspartyl polymers and their application to Pb2+ removal from glycyrrhizin

Polyaspartate is an excellent Pb²⁺‐binding agent in comparison with some polyaspartamide derivatives with different side chains, in that it possesses a higher Pb²⁺ uptake and a lower Pb²⁺ equilibrium concentration. Equilibrium sorption data for Pb²⁺ on polyaspartate can be well fitted with the Freundlich and Langmuir models. Experimental results show that a crosslinked polyaspartate hydrogel is superior to poly(acrylic acid)‐based resins and polystyrene‐based chelating resins. IR spectra and X‐ray photoelectron spectra reveal that the polyaspartate hydrogel binds Pb²⁺ by both an ion‐exchange mechanism and a chelating mechanism. The polyaspartate hydrogel is also an effective agent for the removal of Pb²⁺ from glycyrrhizin. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2215–2220, 2005     

提高硫酸生产用钒催化剂性能的技术措施与效果

针对国产的硫酸生产用钒催化剂普遍存在的反应活性欠稳定、颗粒强度偏低、催化剂床层阻力偏大等问题，采取了对载体硅藻土进行共再浆水选处理、煅烧处理、热浓硫酸处理;晨添加剂中加入稀有元素，提高钾钒比，优化中和条件；采用专利技术成型，成品采用立式煅烧等技术措施，提高了钒催化剂的性能。改进后的钒催化剂不易粉化，低温型钒催化剂的活性明显提高，起燃温度可降至350℃，390℃以下的活性明显优于宽温型的，宽温型钒催化剂在390－450℃的活性更为优异。     

优化技术在原油管输调度中的应用

以甬沪宁原油管网为例,说明调度优化系统将数学规划模型和仿真模型2种调度方法完美结合,首先采用数学规划模型计算出最优解或可行的满意解,然后将结果导入仿真模型进行模拟,修正数学模型近似或忽略的因素.主要描述混合整数线性规划技术以及仿真技术在原油管输调度中的应用及应用的初步效果.     

橡胶注射过程中压力变化的研究

对橡胶注射过程中的压力变化进行了理论与实验研究。充模流动模型的压力、能量控制方程分别为：选用高斯方法求解总体有限元方程。实验与计算分析对比证明．本文选用的数学模型和计算方法所得结果与实测结果基本吻合、该模型可用以代替大量的实验，对橡胶充模过程进行模拟，并用Ｇｒａｐｈｅｒ软件对数值结果进行处理，以图表直观地表达出各种因素对充模过程的影响。     

Surface morphology control of immiscible polymer-blend thin films

The effects of the molecular weights (molecular weight of polystyrene, M_w,PS, varying from 2.9 to 129 k) on the surface morphologies of spin-coated and annealed polystyrene/poly (methyl methacrylate) (PS/PMMA=50/50, w/w) blend films were investigated by atomic force microscopy and X-ray photoelectron spectroscopy. For the spin-coated films, when the M_w,PS varied from 2.9 to 129 k, three different kinds of surface morphologies (a nanophase-separated morphology, a PMMA cellular or network-like morphology whose meshes filled with PS, a sea-island like morphology) were observed and their formation mechanisms are discussed, respectively. Upon annealing, two different morphology-evolution processes were observed. It is found that a upper PS-rich phase layer is formed when M_w,PS<4 k, and this behavior is mainly attributed to the low interfacial tension between PS and PMMA component. When M_w,PS>4 k, the PS-rich phase forms droplets on top of the PMMA-rich phase layer which wets the SiO_x substrate. These results indicate that the surface morphology of the polymer blend films can be controlled by the polymer molecular weight and annealing conditions.