PR-MAC: A practical approach for exploiting relay transmissions in multi-rate WLANs

In this paper, we propose a new MAC protocol, called proxy relay-enabled MAC (PR-MAC), to improve the capacity of multi-rate WLANs. PR-MAC introduces a new entity called Proxy Relay Point (PRP), which serves as a relay between the AP and stations. The cooperation of the AP with PRP replaces direct transmissions for low-rate stations with fast two-hop transmissions while the stations think that they communicate directly with the AP. Our experiment and simulation results showed that PR-MAC can significantly improve the throughput of legacy stations without any modification on the MAC operation of the stations.     

Constructing Internet coordinate system based on delay measurement

In this paper, we consider the problem of how to represent the locations of Internet hosts in a Cartesian coordinate system to facilitate estimation of network distances among arbitrary Internet hosts. We envision an infrastructure that consists of beacon nodes and provides the service of estimating network distance between pairs of hosts without direct delay measurement. We show that the principal component analysis (PCA) technique can effectively extract topological information from delay measurements between beacon hosts. Based on PCA, we devise a transformation method that projects the raw distance space into a new coordinate system of (much) smaller dimensions. The transformation retains as much topological information as possible and yet enables end hosts to determine their coordinates in the coordinate system. The resulting new coordinate system is termed as the Internet Coordinate System (ICS). As compared to existing work (e.g., IDMaps and GNP), ICS incurs smaller computation overhead in calculating the coordinates of hosts and smaller measurement overhead (required for end hosts to measure their distances to beacon hosts). Finally, we show via experiments with both real-life and synthetic data sets that ICS makes robust and accurate estimates of network distances, incurs little computational overhead, and its performance is not susceptible to the number of beacon nodes (as long as it exceeds a certain threshold) and the network topology.     

Design of Linear Phase FIR Filters in Subexpression Space Using Mixed Integer Linear Programming

In this paper, a novel optimization technique is proposed to optimize filter coefficients of linear phase finite-impulse response (FIR) filter to share common subexpressions within and among coefficients. Existing approaches of common subexpression elimination optimize digital filters in two stages: first, an FIR filter is designed in a discrete space such as finite wordlength space or signed power-of-two (SPT) space to meet a given specification; in the second stage, an optimization algorithm is applied on the discrete coefficients to find and eliminate the common subexpressions. Such a two-stage optimization technique suffers from the problem that the search space in the second stage is limited by the finite wordlength or SPT coefficients obtained in the first stage optimization. The new proposed algorithm overcomes this problem by optimizing the filter coefficients directly in subexpression space for a given specification. Numerical examples of benchmark filters show that the required number of adders obtained using the proposed algorithm is much less than those obtained using two-stage optimization approaches.     

Design and Analysis of a Permanent Magnet Spherical Actuator

This paper has proposed a 3-DOF spherical actuator consisting of a ball-shaped rotor with a full circle of permanent- magnet (PM) poles and a spherical-shell-like stator with two layers of circumferential air-core coils. One key feature of this design is the parametrization of PM and coil poles. Based on the torque model of the PM spherical actuator, the relationship between poles' parameters and torque output can be demonstrated. As a result, the actuator design aiming at achieving maximum torque output can be carried out from the relationships. Another advantage of this spherical actuator is its singularity-free workspace, which is verified with the actuator torque model and condition numbers.     

A Multiscale-Porous Anion Exchange Membrane for Convenient and Scalable Electrokinetic Concentration of Cationic Species

A device able to electrokinetically concentrate cationic samples has many potential medical and industrial applications, but until now has remained undeveloped due to the lack of a commercial anion-permselective material leading to a prohibitively complex fabrication procedure. Herein, a novel multiscale-porous anion exchange membrane (MP-AEM) that enables the convenient and scalable electrokinetic concentration of cationic species is proposed. A mechanically enhanced multiscale-porous structure with a solid framework is realized by adopting polyester resin as an additive to overcome the intrinsic limitations of the AEM material. The scalable MP-AEM-embedded electrokinetic concentrator is devised based on the peculiar properties of the MP-AEM that for allow both ion and fluid transport. With the MP-AEM, the concentrator is fabricated in a highly streamlined manner consisting only of a simple insertion and assembly. The concentration performance of the MP-AEM-embedded electrokinetic concentrator is demonstrated with a positively charged fluorescent dye and a fluorescein-labeled protein, and the results show enrichment factors of 250 and 500, respectively. The MP-AEM makes cationic electrokinetic concentration more accessible and scalable, thereby enabling further progress in a wide range of fields.     

Digital Laser Micropainting for Reprogrammable Optoelectronic Applications

Structural coloration is closely related to the progress of innovative optoelectronic applications, but the absence of direct, on-demand, and rewritable coloration schemes has impeded advances in the relevant area, particularly including the development of customized, reprogrammable optoelectronic devices. To overcome these limitations, a digital laser micropainting technique, based on controlled thin-film interference, is proposed through direct growth of the absorbing metal oxide layer on a metallic reflector in the solution environment via a laser. A continuous-wave laser simultaneously performs two functions—a photothermal reaction for site-selective metal oxide layer growth and in situ real-time monitoring of its thickness—while the reflection spectrum is tuned in a broad visible spectrum according to the laser fluence. The scalability and controllability of the proposed scheme is verified by laser-printed painting, while altering the thickness via supplementary irradiation of the identical laser in the homogeneous and heterogeneous solutions facilitates the modification of the original coloration. Finally, the proof-of-concept bolometer device verifies that specific wavelength-dependent photoresponsivity can be assigned, erased, and reassigned by the successive application of the proposed digital laser micropainting technique, which substantiates its potential to offer a new route for reprogrammable optoelectronic applications.     

Selective wet etching of p-GaN for efficient GaN-based light-emitting diodes

The selective wet etching of a p-GaN layer by using a solution of KOH in ethylene glycol (KE) was studied to enhance the optical and electrical performance of the GaN-based light-emitting diodes (LEDs). The surface of the p-GaN, which was selectively etched in the KE solution, showed hexagonal-shaped etch pits. The light-output power of etched LEDs was improved by 29.4% compared to that of the nonetched LED. This improvement was attributed to the increase in the probability of photons to escape due to the increased surface area of textured surface and the reduction in contact resistance of the ohmic layer resulting from the increased contact area and hole concentration on the textured p-GaN. The reverse leakage current of the LED was also greatly decreased due to the surface passivation and the removal of defective regions from the p-GaN.     

Multi-objective module placement for 3-D system-on-package

System-on-package (SOP) is a viable alternative to system-on-chip (SOC) for meeting the rigorous requirements of today's mixed-signal system integration. Thermal integrity is arguably the most crucial issue in three-dimensional (3-D) SOP due to the compact nature of the 3-D integration. In addition, the power supply noise issue becomes more serious as the supply voltage continues to decrease while the number of active devices consuming power increases. We propose a 3-D module and decap (decoupling capacitance) placement algorithm that evenly distributes the thermal profile and reduces the power supply noise. In addition, we allocate white spaces around the modules that require decaps to suppress the power supply noise while minimizing the area overhead. In our experimentation, we achieve improvements in both maximum temperature and decap amount with only small increase in area, wirelength, and runtime.     

Design and Optimization of the Extended True Single-Phase Clock-Based Prescaler

The power consumption and operating frequency of the extended true single-phase clock (E-TSPC)-based frequency divider is investigated. The short-circuit power and the switching power in the E-TSPC-based divider are calculated and simulated. A low-power divide-by-2/3 unit of a prescaler is proposed and implemented using a CMOS technology. Compared with the existing design, a 25% reduction of power consumption is achieved. A divide-by-8/9 dual-modulus prescaler implemented with this divide-by-2/3 unit using a 0.18-mum CMOS process is capable of operating up to 4 GHz with a low-power consumption. The prescaler is implemented in low-power high-resolution frequency dividers for wireless local area network applications     

A self-driven active clamp forward converter using the auxiliary winding of the power transformer

This study proposes a new self-driven active clamp forward converter eliminating the extra drive circuit for the active clamp switch. The converter used the auxiliary winding of the power transformer to drive the active clamp switch and a simple RC circuit to get the dead time between the two switches. The operation principle was presented and experimental results were used to verify theoretical predictions. A 100-W (5 V/20 A) prototype converter that only exhibited 1.5-turn winding number in the auxiliary winding was sufficient to drive the active clamp switch on the input of 50 V. Finally, the measured efficiency of the converter was presented and the maximum efficiency of 91% was obtained.