翅片式空气冷却器改造

针对茂名石化乙烯工业公司全密度聚乙烯装置翅片式空气冷却器存在的问题。结合生产实际要求进行了改造。将原设备换热芯由不可拆结构改为可抽芯结构。原圆形换热管更换为椭圆管。材质由SS304不锈钢更换为铜，并对改造后的空气冷却器进行了传热核算。理论和实践证明，改造是成功的。     

One‐step production of 2,3‐butanediol from starch by secretory over‐expression of amylase in Klebsiella pneumoniae

BACKGROUND: 2,3‐Butanediol (2,3‐BD) is a valuable chemical that can be biosynthesized from many kinds of substrates. For commercial biological production of 2,3‐BD, it is desirable to use cheap substrate without pretreatment, such as starch. However, there have been few reports on the production of 2,3‐BD directly from starch. RESULTS: In this work, gene malS coding for α‐amylase (EC 3.2.1.1) precursor was inserted into plasmid pUC18K, and secretory over‐expression of α‐amylase was achieved by engineered Klebsiella pneumoniae. The extracellular recombinant amylase accelerated the hydrolyzation of starch, and one‐step production of 2,3‐BD from starch was carried out by engineered K. pneumoniae. A 2,3‐BD concentration of 3.8 g L^?1 and yield of 0.19 g 2,3‐BD g^?1 starch were obtained after 24 h fermentation. CONCLUSION: The one‐step production of 2,3‐BD from starch was achieved by secretory over‐expression of amylase in K. pneumoniae. This would simplify the process and reduce the production cost considerably by enabling use of starch with minimal pretreatment. Copyright © 2008 Society of Chemical Industry     

Risk-Based Allocation of Distribution System Maintenance Resources

Asset management is an important activity in present day distribution system planning and operation. Utilities are constantly striving to optimize the use of resources available for maintenance while ensuring system reliability is within satisfactory limits. This paper proposes a method to allocate maintenance resources to various distribution system assets. To determine the effects of maintenance, a predictive reliability assessment tool is developed. This paper describes the model on which this tool is based. The results obtained from reliability assessment can be used along with an optimizer to allocate resources to various maintenance tasks in a distribution system.     

Cr12型模具钢锻造内部裂纹产生的原因及预防

基于Cr12型钢种的特点，归纳了Cr12钢锻造时内部裂纹的类型，分析了内部裂纹产生的原因并提出了相应的预防措施。     

光谱法快速测定土壤中的多个微量元素

本法采用碳酸钡、氟化锂、石墨粉作缓冲剂，用锑做铅锌的标．用铪作铌的内标，用钯作铍、铬、镧、锶、铜的内标。采用小孔电极，交流电弧做为激发光源，同时测定铅、锡、锌、铍、铬、镧、铌、铜、锶等九个元素。分析数据基本稳定．能达到土壤样品的检出限要求。     

扫描电子显微镜在PS版铝板基砂目形貌观察中的应用

用扫描电子显微镜(SEM)对PS版铝板基上的砂目形貌进行了观察分析，比较了不同砂目形貌对PS版性能的影响。实践证明，SEM可以方便直观地观察铝板基上砂目的细密程度、平台和深度，为砂目的处理提供客观可靠的依据。     

自适应比例因子模糊控制器在异步电动机调速系统中的应用

为了降低转子电阻变化对异步电动机矢量控制系统性能的影响，本文把自适应比例因子模糊控制器应用到了矢量控制系统中。介绍了自适应比例因子模糊控制方法的綦本原理，给出了使用自适应比例因子模糊控制器的异步电动机矢量控制系统的结构框图，对主模糊控制器和辅助模糊控制器进行了设计。仿真实验结果表明，采用这种控制方法的调速系统不仅具有优良的动态性能，而且对转子电阻变化具有很强的鲁棒性。     

浅谈变频器供电条件下电动机的温升与对策

随着变频调速技术的蓬勃发展，变频器供电电机的温升问题已引起人们的广泛关注。本文首先讨论了电动机的温升限度；然后结合感应电机温升实验的相关数据分析了变频器供电对电动机温升的影响及其原因；最后从降低发热量和提高散热能力两方面提出缓解电机温升的措施，并指出了实际应用中应注意的问题。     

彩泥玩出夏日魅力

产品特点 主题新潮健康：每套产品都配合儿童的特点以某一主题来设计，如“恐龙世界”通过不同种类和形状的恐龙，启发孩子去探索人类的起源；“快餐中心”让家长与孩子同乐，一齐制作不同的“美食”等等。这使得孩子在玩的过程中增长了见识。[编者按]     

Drying Equipments for Pharmaceutical Industry

此文为李桢教授在2004年11月时寄予本刊。我们在“干燥刊中刊”发表此文以纪念为中国干燥行业作出巨大贡献的李桢教授。下附李桢教授写给本刊编辑的亲笔信：