Numerical analysis on reaction injection molding of polyurethane foam by using a finite volume method

Foam reaction injection molding (FRIM) is one of the most popular and useful processes for producing polyurethane foam with a complex geometry. A theoretical model which includes chemical reactions, foaming, and mold filling was developed to analyze FRIM. Energy balance equation was derived by considering polyurethane reaction, water-isocyanate reaction, and evaporation of physical blowing agents. Density and viscosity model was proposed for the bubble suspension, which was assumed to be a homogeneous phase. Based on the theoretical model, three-dimensional numerical simulation for mold filling of the polyurethane foam was carried out to predict flow field, flow front advancement, and density distribution during mold filling. Mold filling of a refrigerator cavity was investigated numerically. The density and thermal conductivity of the foam in the flow front was higher than those in the initially filled region.     

Trans-10 18:1 in ruminant meats: A review

Trans (t) fatty acids (TFA) from partially hydrogenated vegetable oils (i.e., industrial trans) have been phased out of foods in many countries due to their promotion of cardiovascular disease. This leaves ruminant-derived foods as the main source of TFA. Unlike industrial TFA where catalytic hydrogenation yields a broad distribution of isomers, ruminant TFA are enzymatically derived and can result in enrichment of specific isomers. Comparisons between industrial and ruminant TFA have often exonerated ruminant TFA due to their lack or at times positive effects on health. At extremes, however, ruminant-sourced foods can have either high levels of t10- or t11-18:1, and when considering enriched sources, t10-18:1 has properties similar to industrial TFA, whereas t11-18:1 can be converted to an isomer of conjugated linoleic acid (cis(c)9,t11-conjugated linoleic acid), both of which have potential positive health effects. Increased t10-18:1 in meat-producing ruminants has not been associated with negative effects on live animal production or meat quality. As such, reducing t10-18:1 has not been of immediate concern to ruminant meat producers, as there have been no economic consequences for its enrichment; nevertheless at high levels, it can compromise the nutritional quality of beef and lamb. In anticipation that regulations regarding TFA may focus more on t10-18:1 in beef and lamb, the present review will cover its production, analysis, biological effects, strategies for manipulation, and regulatory policy.     

The influence of titanium on the electrochemical properties of the AB5-type metal hydrides

AB₅-type intermetallic compounds were prepared by arc-melting in argon atmosphere. The composition of a stoichiometric compound LaNi_3.6Al_0.4Co_0.7Mn_0.3 with a hexagonal CaCu₅ structure was varied by stoichiometric and nonstoichiometric addition of Ti. With the increase of the Ti y0.05 content in LaNi_3.6Al_0.4Co_0.7Mn_0.3Ti_y, the hydrogen storage capacity is enhanced, whereas when y=0.1–0.3, it is decreased. The discharge capacity and cyclability are increased considerably by addition of titanium in the range of 0.02–0.1 with a maximum value at about 0.1%. The highest maximum capacity is achieved for a nonstoichiometric addition of 0.05% Ti. The kinetic properties are also additionally improved by the formation of a titanium-rich second phase. This can explain the improvement of the capacity for alloys with low Ti content. The decrease in capacity for high Ti content was also correlated with the amount of the Ti-rich phase. Therefore, the improvement of kinetics are due to the catalytic effect, grain boundary diffusion effect or more pronounced alloy pulverization upon cycling. This study has been aimed to improve the electrode properties of a series of multicomponent LaNi_3.6Al_0.4Co_0.7Mn_0.3Ti_y (y=0.0, 0.02, 0.05, 0.1, 0.2, 0.3) alloys which have mutual complementary properties. All the prepared alloys have been subjected to analyses by EDS, SEM and XRD. In order to determine the hydrogen storage capacity, the pressure composition isotherms (P–C–T curves) have been used. The metal hydride electrodes were characterized by galvanostatic cycling test.     

Effect of low-cycle fatigue on the hot ductility of plain carbon steel

In a continuous casting steelmaking operation, the surface of a slab is under a condition that can be characterized as high-temperature, low-cycle fatigue in which the tensile and compressive stress is repeatedly developed. For this reason, for the evaluation of the hot ductility of a slab, considering the fatigue deformation is more feasible before a tensile or compressive test. In this study, the effects of low-cycle fatigue on the hot ductility of steels with a carbon content of 0.06–0.8 wt.% are investigated at various temperatures. For a carbon content of 0.06%, there were no significant differences between the RA values from a simple tensile test and those from a tensile test after fatigue deformation. The tendency of ductility deterioration with fatigue deformation is evident in 0.1 %C steel, and is due to the deformation-induced ferrite film that forms around the prior austenite grain. Conversely, high carbon steel containing 0.8 %C did not show a recovery of hot ductility in a low temperature region, and the specimen on which the tensile was measured after fatigue showed a higher hot ductility in the low temperature region, which is thought to result from the pearlite refinement effects. As the results obtained in this work showed noticeable differences in the hot ductility of carbon steel through the test conditions, it is suggested that for more accurate data, fatigue deformation be adopted in which the temperature range in an unbending operation is determined in the steelmaking factory.     

Magnesium interlayered diamond coating on silicon

Diamond thin films have been deposited using hot filament chemical vapour deposition technique on manually scratched p-Si(1 0 0) substrate, with and without magnesium interlayer. In spite of magnesium melting point being lower (T_m = 649 °C) than the growth temperature of the substrate (T_s  750 °C) used in these experiments, it was found that high quality diamond films could be grown on Mg covered substrate. A liquid substrate is probably generated during the diamond film growth. Raman spectroscopy analysis exhibited only the triply degenerate, zone centre optical phonon peak at 1333 cm⁻¹ indicating that nearly stress free crystallites were present. Broadening of the Raman peak (11.76 cm⁻¹) indicates that some small crystallites also are present. Scanning electron and atomic force microscopy accompanied by X-ray diffraction analysis where used to compare the details of diamond film growth directly on scratched Si(1 0 0) and Mg interlayered scratched Si(1 0 0) substrates.     

Frequent Interaction and Fast Feedback Predict Perceived Social Support: Using Crawled and Self‐Reported Data of Facebook Users

The present study examines if Facebooking can contribute to psychological well‐being and if so, which aspects of Facebook use could play a significant role. Matching crawled data with self‐reported data from mobile Facebook users, we found that more social interactions with Facebook friends and faster friends' reactions to a user's post contributed toFacebook user's perceived social support and ultimately alleviated loneliness. We also found that the association between frequency as well as speed of Facebook social interactions and psychological well‐being were more significant among those who were sensitive to other's behaviors and feelings than those who were not. The theoretical and practical implications of the findings, particularly regarding mobile communication context, are also discussed.     

Gender Differences in Mouse and Cursor Movements

Computer cursor and mouse activities such as moving, pointing, selecting, and dragging are essential parts of everyday interactions. Yet it is unknown how men and women differ in the way they move computer cursors. This study examines gender differences in movements of computer cursors. In one experiment, the authors measured trajectories of computer cursors every 20 ms in a simple choice-reaching task and tested the extent to which movement features related to controlling and targeting diverge between male and female participants. Results showed significant gender differences in cursor motions. Female participants deviated from the straight path toward the target location to a larger degree than did male participants, and female participants showed more backward motions (deviating backward from the target location) than did male participants. Implications for sources of these gender differences, user interface and input device design, and musculoskeletal disorders in women are also discussed.     

The effect of handle friction and inward or outward torque on maximum axial push force

OBJECTIVE: To investigate the relationship among friction, applied torque, and axial push force on cylindrical handles. BACKGROUND: We have earlier demonstrated that participants can exert greater contact force and torque in an "inward" movement of the hand about the long axis of a gripped cylinder (wrist flexion/forearm supination) than they can in an "outward" hand movement. METHOD: Twelve healthy participants exerted anteriorly directed maximum push forces along the long axis of aluminum and rubber handles while applying deliberate inward or outward torques, no torque (straight), and an unspecified (preferred) torque. RESULTS: Axial push force was 12% greater for the rubber handle than for the aluminum handle. Participants exerted mean torques of 1.1, 0.3, 2.5, and -2.0 Nm and axial push forces of 94, 85, 75, and 65 N for the preferred, straight, inward, and outward trials, respectively. Left to decide for themselves, participants tended to apply inward torques, which were associated with increased axial push forces. CONCLUSION: Axial push force was limited by hand-handle coupling--not the whole body's push strength. Participants appeared to intuitively know that the application of an inward torque would improve their maximum axial push force. Axial push forces were least when a deliberate torque was requested, probably because high levels of torque exertions interfered with the push. APPLICATION: A low-friction handle decreases maximum axial push force. It should be anticipated that people will apply inward torque during maximum axial push.     

Influence of wall charge distribution on time lag of address discharge in AC plasma display panels

The influence of wall charge distribution on the time lag of address discharge in an AC plasma display panel is investigated using two different reset waveforms: one (typical reset) induces both face and surface discharges and the other (TR reset) induces face discharges only. The measured formative time lag and statistical time lag of address discharge for TR were 21–31 ns and 31–74 ns shorter than the one for the typical reset, respectively. The TR reset resulted in much less increase of statistical time lag than the typical reset when the reset-to-address time interval was increased, and 70 ns smaller deviation of the statistical time lag among different color cells. Calculations show that the TR reset forms a much smoother wall charge profile, which is less susceptible to cell parameter variations, than the typical reset. The observed differences in the time lags of address discharge between different scan lines and color cells are strongly correlated to the differences of the wall charge profile, indicating that a smooth wall charge profile formed by the reset using face discharges only reduces the time lag of address discharge and minimizes the susceptibility of address discharge to cell parameter variation.