Corrugated Quantum-Well Infrared Photodetector Focal Plane Arrays

Corrugated quantum-well infrared photodetectors (C-QWIPs) have been proposed for long-wavelength infrared detection. In this work, we optimize the detector structure and produce a number of large format focal plane arrays (FPAs). Specifically, we adopt one-corrugation-per-pixel geometry to increase the active detector volume and incorporate a composite cover layer to preserve the large sidewall reflectivity, which results in a large detector quantum efficiency. We also optimize the detector material structure such as the final state energy, the doping density, and the number of quantum well periods to improve the FPA operation under the existing readout electronics. As a result, high FPA sensitivity has been achieved, and their characteristics are in agreement with the detector model. Based on this model, we perform a systematic analysis on the FPA performance with a wide range of detector and system parameters. We find that C-QWIP FPAs are capable of high-speed imaging especially for those with longer cutoff wavelengths.     

Phase Diversity for an Antenna-Array System With a Short Interelement Separation

This paper presents a simple procedure of obtaining a diversity gain in an antenna-array system with a short interelement separation, typically less than the carrier wavelength. The new technique provides a diversity gain through a noncoherent combination of received signals at each antenna element. The diversity gain arises because, as the number of signal components of the received signal at each antenna element becomes large enough and as the arrival angle of each signal component is distinct from one another, which is a general signal circumstance in most practical code division multiple access (CDMA) signal environments, the amplitudes of the received signals become nearly independent due to the phase difference among the received signals. The diversity gain was referred to as ldquophase diversityrdquo in this paper. The proposed technique is first theoretically analyzed to estimate the performance in terms of pseudorandom-noise-code acquisition, which is verified through extensive computer simulations. Then, through the experimental results that are obtained from a CDMA array-antenna base station system, it has been shown that the performance of noncoherent detection is proportionally improved to the number of antenna elements.     

Adaptive power saving mechanism considering the request period of each initiation of awakening in the IEEE 802.16e system

Performance of the IEEE 802.16 e power management is mainly affected by two operating parameters: the minimum sleep interval (T _min) and the maximum sleep interval (T _max), in sleep-mode operation. To enhance the performance, this letter proposes a new power saving mechanism, which adaptively controls these parameters by considering the request period of each initiation of awakening (Tint)- The numerical analysis and simulation results show that this mechanism can achieve better energy conservation with reasonable response delay of Medium Access Control (MAC) Service Data Units (SDUs) than the standard operation.     

Chiral Se Nanobrooms with Wavelength and Polarization Sensitive Scattering

High-index dielectric nanostructures offer strong magnetic and electric resonances in the visible range and low optical losses, stimulating research interest in their use for light manipulation technologies. Lithographic fabrication of dielectric nanostructures, while providing precise control over the pattern dimensions, limits the scalability of this approach for practical applications due to an inefficient fabrication process and limited production quantity. Here, the colloidal synthesis of high-index chiral dielectric nanostructures with a broom-like geometry made from trigonal Se is demonstrated. The anisotropic morphology and crystal structure of Se nanobrooms enable both linearly and circularly polarized scattering, as well as spectrum variation along the particle axis, which is, to the authors’ knowledge, the first observation of such behavior from dielectric colloidal nanostructures. To show the versatility of the highly scattering Se NB suspensions, 2D and 3D printing of Se NB inks are demonstrated as a proof of concept. This approach provides a way to manipulate light using aqueous dispersions of high-index dielectric nanostructures, unlocking their potential to fit in various morphologies and dimensions in 2D and 3D for broad applications.     

Mucoadhesive Phenolic Pectin Hydrogels for Saliva Substitute and Oral Patch

Oral disease is one of the most common conditions worldwide, negatively affecting general health, reducing the quality of life, and often developing into systemic illness. However, the design of therapeutic agents for oral diseases is challenging due to various unique features of the oral cavity, including its wet and dynamic environment and curved shape. Herein, the development of highly biocompatible mucoadhesive functional hydrogels for oral applications is reported, generated by introducing bio-inspired phenolic moieties into a pectin polymer. Pyrogallol-functionalized pectin (Pec-PG) can be crosslinked in situ via autoxidation without chemical agents and readily fabricated as various formulations. Sprayable Pec-PG hydrogel exhibits strong mucoadhesion and outstanding hydration ability ex vivo and in vivo, thus displaying significant potential as a novel saliva substitute for dry mouth. The authors further show that topical application of mucoadhesive Pec-PG patches pre-loaded with corticosteroid significantly promotes the repair of diabetic oral ulcer tissue via prolonged drug release, free radical scavenging, and physical barrier effects. Moreover, similar applications for oral ulcer treatment using a pectin hydrogel modified with catechol (Pec-CA), another phenolic moiety are demonstrated. Together, these findings suggest that mucoadhesive phenolic pectin derivatives can provide highly biocompatible, convenient, and effective hydrogel platforms for treating oral diseases.     

Antenna subset selection at multi‐antenna relay with adaptive modulation

In this paper, we proposed several antenna selection schemes for cooperative diversity systems with adaptive transmission. The proposed schemes were based on dual‐hop relaying where a relay with multiple‐antenna capabilities at reception and transmission is deployed between the source and the destination nodes. We analyzed the performance of the proposed schemes by quantifying the average spectral efficiency and the outage probability. We also investigated the trade‐off of performance and complexity by comparing the average number of active antennas, path estimations, and signal‐to‐noise ratio comparisons of the different proposed schemes. Copyright © 2011 John Wiley & Sons, Ltd.     

Improved performances of a S-SEED using extremely shallowquantum-wells and asymmetric Fabry-Perot cavity structure

The authors report significantly improved performances of a symmetric self-electrooptic-effect device (S-SEED), with high on-off contrast ratio (>30:l) and large optical bistability loop widths (ΔP=44%) at an applied bias of V_a=0 V, i.e., with no power supply. The S-SEED is made of extremely shallow quantum wells (ESQWs) in an asymmetric Fabry-Perot (AFP) cavity structure. At V_a =5 V ΔP increased by up to 95%, preserving the high contrast ratio. The reflectivity changes at V_a=0 and 5 V were about 15% and 30%, respectively. These are believed to be the largest values ever reported for such structures     

Variable VCC design techniques forbattery-operated DRAMs

Wide-voltage-range DRAMs with extended data retention are desirable for battery-operated or portable computers and consumer devices. The techniques required to obtain wide operation, functionality, and performance of standard DRAMs from 1.8 V (two NiCd or alkaline batteries) to 3.6 V (upper end of LVTTL standard) are described. Specific techniques shown are: (1) a low-power and low-voltage reference generator for detecting V_CC level; (2) compensation of DC generators, V_BB and V_PP, for obtaining high speed at reduced voltages; (3) a static word-line driver and latch-isolation sense amplifier for reducing operating current; and (4) a programmable V_CC variable self-refresh scheme for obtaining maximum data retention time over a full operating range. A sub-50-ns access time is obtained for a 16 M DRAM (2 M×8) by simulation     

An Approach to the Market Analysis of KoreaSat Services

The field of marketing research in the satellite communication services is still in the early stage of its development. Particularly, in Korean domestic satellite service market, many theoretical and methodological opportunities now exist. In this paper we develop a model, which identifies target markets and promising application services in Korean satellite communication service market. One key contribution of this paper is a modeling approach to the assessment of market potential and priorities of the application services in each Korean industry. We define and estimate the degree of attractiveness for each segmented market which represents the market potential estimated by current usage of terrestrial services and each market segment's willingness to adopt satellite technology. Since all possible satellite application services are not equally important in the market, they should be differentiated in terms of the likelihood of success. We introduce another index prioritizing application services by tying together three important factors affecting Korean satellite service demand. Some marketing implications of model results are also discussed. Finally the findings of our model are compared with those of other similar studies.