Effect of deteriorated microstructures on stress corrosion cracking of X70 pipeline steel in acidic soil environment

In order to investigate stress corrosion cracking (SCC) of X70 pipeline steel and its weld joint area in acidic soil environ-ment in China, two simulating methods were used: one was to obtain bad microstructures in heat affected zone by annealing at 1300°C for 10 min and then, quenching in water; the other was to get different simulating solutions of acidic soil in Yingtan in south-east China. The SCC susceptibilities of X70 pipeline steel before and after quenching in the simulating solutions were analyzed...     

NOET合成方法的改进及其99Tcm标记

本工作主要在ＮＯＥＴ的合成方面做了一些改进,制备出纯度高,稳定性较好的ＮＯＥＴ的钾盐,并探讨了影响＾９９Ｔｃ＾ｍＮ－ＮＯＥＴ标记率的相关因素,由此得出最佳标记条件。在此条件下,＾９９Ｔｃ＾ｍＮ－ＮＯＥＴ的标记率可稳定在９０％以上。     

电弧作用下 AgMeO 触头材料的物理冶金过程分析

本文分析了ＡｇＭｅＯ触头材料电弧侵蚀机理,对电弧的热力作用下触头材料的各种响应从物理冶金本质角度进行全面研究,在此基础上对ＡｇＭｅＯ触头材料组元和组织的优化设计作了完整的分析讨论,提出优化设计判据,最后提出能充分表征触头材料电气使用性能的材料物理性能参数。     

GB/T9945《热轧球扁钢》国家标准修订综述

简要介绍了热轧球扁钢的发展和技术要求,并研究了新标准的修订情况.     

出钢顺立案模型在宝钢炼钢厂的应用

从基本概念和程序的具体实现两方面,阐述了出钢顺立案模型的功能、特点以及在生产实践中所取得的效果。     

基于函数插值的柯氏质量流量计信号处理方法

对基于离散傅里叶变换(DFT)信号处理方式的柯氏质量流量计来说,影响其精度的关键问题是如何实现信号的整周期采样。提出了一种全新的方法,用采样率固定不变的采样数据,通过软件实时地确定信号的频率并且实现信号整周期重新采样。实验结果表明该方法在求取相位差时具有极高的精度。     

Antireflection and band gap extension effects of ZnO nanocrystalline films grown on ITO-coated glasses by low temperature process

Zinc oxide (ZnO) nanocrystalline films coated on indium tin oxides (ITO, 90:10 wt%) glasses were prepared by low temperature process. The thin films were composed of uniform nanoparticles with average diameter around 8.4 nm. All samples exhibited excellent optical antireflective phenomena, and the maximum transmission reached 92.8% for the sample spin coated at 1500 rpm at 453 nm, improved by 21.5%. The antireflective results were explained by the coherence theory. And the antireflective effects were induced by the ITO and ZnO films. The calculated thicknesses of the ZnO films agreed well with the experimental results. The theoretical calculated band gap from the average diameter of ZnO nanoparticles was also well consistent with the experimental ones obtained from the optical transmission spectra. This result was promising for applications in organic solar cells.     

Effect of doping cobalt on the micro-morphology and electrochemical properties of birnessite MnO2

Birnessite-type MnO₂ nanoparticles are synthesized by mixing KMnO₄ solution directly with ethylene glycol under ambient conditions. When cobalt exists in the solution, the micro-morphology of the products transforms from conglomeration to dispersive state. The result of transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE-SEM) shows that the product is constructed with nanosphere in sizes of ca. 40 nm. These nanospheres are twisted by nanorods clusters. X-ray diffraction (XRD) pattern shows that the products are birnessite-type. The electrochemical properties of the prepared materials are studied using cyclic voltammetry (CV) and galvanostatic charge–discharge test in aqueous electrolyte. The product shows a very high specific capacity of 326.4 F g⁻¹. These results indicate that cobalt has great effects on the micro-morphology and electrochemical properties of manganese dioxide.