The effect of luteal "rescue" on the expression and localization of matrix metalloproteinases and their tissue inhibitors in the human corpus luteum

Luteolysis is associated with tissue remodeling probably involving the matrix metalloproteinases (MMPs) and their specific tissue inhibitors (TIMPs). This study investigated the expression and localization of the major MMPs and TIMPs in the human corpus luteum throughout the luteal phase and after luteal rescue with hCG. Corpora lutea (n = 9) were collected at hysterectomy and were dated by serial urinary LH estimation. In addition, corpora lutea (n = 3) were collected from women who had received daily doubling doses of hCG to mimic the hormonal changes of early pregnancy. MMP-1, MMP-2, MMP-9, TIMP-1, TIMP-2, and TIMP-3 were investigated by zymography, reverse zymography, Northern blotting, and in situ hybridization. There was no change in the expression of MMP-1, TIMP-1, and TIMP-2 throughout the luteal phase or after luteal rescue. Little TIMP-3 could be detected in the corpus luteum. MMP-9 activity peaked in the early and late luteal phase. The expression and activity of MMP-2 were maximal in the late luteal phase. Exposure to hCG during luteal rescue in vivo was associated with a reduction (P < 0.05) in the expression and activity of MMP-2. Messenger ribonucleic acids (mRNAs) for MMP-1, MMP-2, and TIMP-2 were localized to the connective tissue stroma and the thecal-lutein cells of the corpus luteum. In contrast, TIMP-1 mRNA was localized to the granulosa-lutein cells, and MMP-9 mRNA was expressed in scattered cells within the steroidogenic and nonsteroidogenic cell layers. In conclusion, during maternal recognition of pregnancy, hCG prevents the normal increase in MMP-2 in the late luteal phase. MMPs can function in an environment containing large amounts of TIMP-1, as they have a different cellular localization.     

Essential contribution of caspase 3/CPP32 to apoptosis and its associated nuclear changes

Caspases are fundamental components of the mammalian apoptotic machinery, but the precise contribution of individual caspases is controversial. CPP32 (caspase 3) is a prototypical caspase that becomes activated during apoptosis. In this study, we took a comprehensive approach to examining the role of CPP32 in apoptosis using mice, embryonic stem (ES) cells, and mouse embryonic fibroblasts (MEFs) deficient for CPP32. CPP32(ex3-/-) mice have reduced viability and, consistent with an earlier report, display defective neuronal apoptosis and neurological defects. Inactivation of CPP32 dramatically reduces apoptosis in diverse settings, including activation-induced cell death (AICD) of peripheral T cells, as well as chemotherapy-induced apoptosis of oncogenically transformed CPP32(-/-) MEFs. As well, the requirement for CPP32 can be remarkably stimulus-dependent: In ES cells, CPP32 is necessary for efficient apoptosis following UV- but not gamma-irradiation. Conversely, the same stimulus can show a tissue-specific dependence on CPP32: Hence, TNFalpha treatment induces normal levels of apoptosis in CPP32 deficient thymocytes, but defective apoptosis in oncogenically transformed MEFs. Finally, in some settings, CPP32 is required for certain apoptotic events but not others: Select CPP32(ex3-/-) cell types undergoing cell death are incapable of chromatin condensation and DNA degradation, but display other hallmarks of apoptosis. Together, these results indicate that CPP32 is an essential component in apoptotic events that is remarkably system- and stimulus-dependent. Consequently, drugs that inhibit CPP32 may preferentially disrupt specific forms of cell death.     

Kinematic analysis of shear displacement as a means for operating mechanotransduction channels in the contact region between adjacent stereocilia of mammalian cochlear hair cells

In sensory hair cells of the cochlea, deflection of the stereociliary bundle results in direct mechanical gating of mechanoelectrical transduction channels, a function generally attributed to the tip link running between the tips of short stereocilia and the sides of adjacent taller ones. However, immunocytochemical experiments indicate that the channels may not be associated with the tip link but occur just below it in a region of contact between the stereocilia. To determine whether transduction channels in this location could be operated during physiologically appropriate deflections as effectively by shear displacement as if they were associated with the tip link, a two dimensional kinematic analysis of relative motion between stereocilia has been performed assuming contact between stereocilia is maintained during deflection. Bundle geometry and dimensions were determined from transmission electron micrographs of hair cells from several frequency locations between 0.27 and 13.00 kHz in the guinea-pig cochlea. The analysis indicates that for a 10 nm deflection of the tallest stereocilia of both inner and outer hair cells, i.e. within the range of the maximum sensitivity of mammalian hair bundles, the average shear displacement in the contact region would be 1.6 nm, but that it increases systematically towards higher frequency regions for outer hair cells. This displacement is comparable in magnitude to tip-link elongation for individual stereociliary pairs.     

Effect of prolonged heating on the optical properties of vitrinite

Vitrinites ranging from sub-bituminous to anthracitic rank have been heated at 150 and 350 °C for residence times extending up to 32 weeks. Devolatilization vacuoles develop in all the vitrinites at 350 °C, apart from the anthracitic. Occasional small vacuoles formed in the vitrinites of coking rank at 150 °C are most probably related to gas evolution from liptinites. Slight rounding of the margins of vitrinite particles of coking rank at 350 °C indicates softening, while heating at the longest residence time has been sufficient to allow vitrinites of coking rank to undergo ‘active decomposition’. Mosaic structures have developed at temperatures as much as 125 °C below those normally attributed to the formation of such structures in short-term laboratory carbonization experiments on vitrinites of the same rank. Again, apart from the vitrinites of anthracitic rank, the reflectance of vitrinites shows a rise at 150 and 350 °C that would continue beyond the longest residence time used. At 350 °C a large part of the reflectance increase occurs during the first week of heating. The reflectance data and the derived refractive and absorptive indices indicate that with sufficiently long residence times, changes that are more fundamental than ‘molecular stripping’ must take place, probably involving condensation reactions that introduce increased coplanarity into the vitrinite molecules. The implication of these data to thermal metamorphism of coals and to the normal coalification process is briefly discussed.     

Modeling the effect of a superabsorbent polymer material as desiccant in maize drying using CFD

Maize is an important foodstuff in many countries, and one of most susceptible crops to mold and aflatoxin contamination, which results in considerable postharvest losses and is a burden to consumers’ health, especially in developing countries. The timely drying of harvested maize is essential to halt mold development, ensuring safe storage. The effect of the incorporation of a superabsorbent polymer (SAP) as desiccant in a maize dryer was studied using computational fluid dynamics simulations which accounted for heat and mass transfer between maize, SAP and air. The adsorption capacity and adsorption rate of a commercial SAP material were experimentally determined at different temperature and relative humidity levels, which served as basis for the adsorption model required in the simulations. A maize bulk with SAP packages distributed in it was modeled. Results showed that the SAP material increases the drying rate substantially, particularly in the upper bulk zone where the air reaching it is dehumidified the most. The maize closer to the upper bulk surface starts drying from the beginning of the process instead of lagging for hours or days before the drying front reaches it. An inconvenience of the SAP material is the tendency of granules to swell and stick together as moisture reaches a threshold, which may reduce its performance. Thus, provided this issue is resolved or minimized, SAP materials could successfully assist the rapid drying of maize and other crops. They may also be used during storage to avoid rewetting of the crops during periods of high relative humidity.     

Stable dye-labelled oligonucleotide-nanoparticle conjugates for nucleic acid detection

Metallic nanoparticles functionalized with oligonucleotides are used for a number of nucleic acid detection strategies. However, oligonucleotide-nanoparticle conjugates suffer from a lack of stability when exposed to certain conditions associated with DNA detection assays. In this study, we report the synthesis of thiol and thioctic acid-modified oligonucleotide gold nanoparticle (OGNs) conjugates functionalized with a dye label and varying spacer groups. The thioctic acid-modified conjugates exhibit increased stability when treated with dithiothreitol (DTT) compared to the more commonly used thiol modification. When the dye labelled oligonucleotide nanoparticle conjugates are exposed to the same conditions there is a pronounced increase in the stability for both thioctic acid and thiol modified sequences. These results open up the possibility of simply using a dye label to enhance the stability of oligonucleotide-nanoparticle conjugates in DNA detection assays where the enhanced stability of the conjugate system can be advantageous in more complex biological environments.     

Nasal Epithelial Cell-Based Models for Individualized Study in Cystic Fibrosis

The emergence of highly effective CFTR modulator therapy has led to significant improvements in health care for most patients with cystic fibrosis (CF). For some, however, these therapies remain inaccessible due to the rarity of their individual CFTR variants, or due to a lack of biologic activity of the available therapies for certain variants. One proposed method of addressing this gap is the use of primary human cell-based models, which allow preclinical therapeutic testing and physiologic assessment of relevant tissue at the individual level. Nasal cells represent one such tissue source and have emerged as a powerful model for individual disease study. The ex vivo culture of nasal cells has evolved over time, and modern nasal cell models are beginning to be utilized to predict patient outcomes. This review will discuss both historical and current state-of-the art use of nasal cells for study in CF, with a particular focus on the use of such models to inform personalized patient care.     

Examination of radio‐opacity enhancing additives in shape memory polyurethane foams

Three microparticle additives, tungsten (W), zirconium oxide (ZrO₂) , and barium sulfate (BaSO₄) were selected to enhance the radio‐opacity in shape memory polymer (SMP) foam biomaterials. The addition of filler causes no significant alterations of glass transition temperatures, density of the materials increases, pore diameter decreases, and total volume recovery decreases from approximately 70 times in unfilled foams to 20 times (4% W and 10% ZrO₂). The addition of W increases time to recovery; ZrO₂ causes little variation in time to shape recovery; BaSO₄ increases the time to recovery. On a 2.00 mean X‐ray density (mean X.D.) scale, a GDC coil standard has a mean X.D. of 0.62 ; 4% W enhances the mean X.D. to 1.89, 10% ZrO₂ to 1.39 and 4% BaSO₄ to 0.74. Radio‐opacity enhancing additives could be used to produce SMP foams with controlled shape memory kinetics, low density , and enhanced X ‐ray opacity for medical materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42054.     

Development of semitransparent wood‐polymer composites

A new material has been developed consisting of pieces of wood embedded within a matrix of acrylic polymer, resulting in a transparent or semitransparent wood‐based product. This material presents quite appealing aesthetic features, thereby opening new possibilities for decorative applications. Because acrylic and methacrylic monomers are in the liquid state at room temperature, it is possible to introduce wood (in the current case, walnut wood) into a mixture of acrylic (hydroxypropyl acrylate) and/or methacrylic monomers (methyl methacrylate and 2‐hydroxyethyl methacrylate) along with a plasticizer (dioctyl phthalate) in the presence of a chemical initiator (benzoyl peroxide). A transparent polymeric matrix with dispersed wood is then obtained through bulk free‐radical polymerization. Introducing this reaction mixture along with pieces of wood into a mold results in a wood‐polymer composite. A 2^4?1 experimental fractional factorial design was implemented to study the importance of the composition of these materials on several relevant properties. The sheets produced were characterized by tensile testing, dynamic mechanical thermal analysis, thermal gravimetric analysis, and heat deflection temperature. The models obtained for predicting each property pointed to valuable insights regarding the influential constituents. In particular, our results suggested that monomers to be used in future applications of this material should be selected in terms of their cost and the desired flexibility for the final product, not in terms of their polarity. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers