Electrical behaviour of doped-yttria stabilized zirconia ceramic materials

Single-phase sintered ceramic materials (ZrO₂)_1?x {(Y₂O₃) _y (RE₂O₃)_{1-y x} }_x (RE=Nd, Ce, Dy, Er), were synthesized and electrical conductivity and transport number measurements were made as a function of temperature between 500 and 1200° C. The activation energies of conduction were determined, and it was found that the charge carriers in these solid solutions are oxygen ions. The fabricated electrolyte discs were used in cells of the type \(P_{O_2 }\) , Pt/zirconia solid solution/ \(P_{\mathop O\limits^{'} _2 }\) , platinum where \(P_{O_2 }\) =air (0.21 atm) and \(P_{\mathop O\limits^{'} _2 }\) =1 atm or argon-O₂ mixtures. Below 700° C, the e.m.f. deviated from the theoretical values for completely ionic conduction; good agreement was observed above this temperature.     

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

The development of new binders, as an alternative to traditional cement, by the alkaline activation of industrial by-products (i.e. ground granulated slag and fly ash) is an ongoing research topic in the scientific community [Puertas F, Amat T, Jimenez AF, Vazquez T. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres. Cem Concr Res 2003;33(12): 2031–6]. The aim of this study was to investigate the feasibility of using and alkaline activated ground Turkish slag to produce a mortar without Portland cement (PC).Following the characterization of the slag, mortar specimens made with alkali-activated slag were prepared. Three different activators were used: liquid sodium silicate (LSS), sodium hydroxide (SH) and sodium carbonate (SC) at different sodium concentrations. Compressive and flexural tensile strength of alkali-activated slag mortar was measured at 7-days, 28-days and 3-months. Drying shrinkage of the mortar was measured up to 6-months. Setting times of the alkali-activated slag paste and PC paste were also measured.Setting times of LSS and SH activated slag pastes were found to be much slower than the setting time of PC paste. However, slag paste activated with SC showed similar setting properties to PC paste.LSS, SH and SC activated slag mortar developed 81, 29, and 36 MPa maximum compressive strengths, and 6.8, 3.8, and 5.3 MPa maximum flexural tensile strengths at 28-days. PC mortar developed 33 MPa compressive strength and 5.2 MPa flexural tensile strength. LSS and SH activated slag mortars were found to be more brittle than SC activated slag and PC mortars.Slag mortar made with LSS had a high drying shrinkage, up to six times that of PC mortar. Similarly, slag mortar made with SH had a shrinkage up to three times that of PC mortar. However, SC activated slag mortar had a lower or comparable shrinkage to PC mortar. Therefore, the use of SC as an activator for slag mortar is recommended, since it results in adequate strength, similar setting times to PC mortar and comparable or lower shrinkage.     

Sensorless control of induction motors by artificial neuralnetworks

In this letter, we propose a voltage-source inverter control working in the open loop of an induction motor measuring the stator current and using an artificial neural network. This technique has the mission to estimate the speed and torque of the rotor without using sensors. With this, a simple and cheap method of control is obtained, with as much precision and robustness as other more complex ones     

Ant colony optimization approach for classification of occupational low back disorder risks

Manual material handling (MMH) tasks, the leading cause of low back disorders (LBDs), are still extensively used in industry in spite of the advanced technology. Classification of industrial jobs related to LBD risks has great significance in preventing injuries and designing workplaces. In this article, industrial jobs have been classified into two categories, low risk and high risk, using ant colony optimization (ACO). ACO classification (ACOCLASS) has obtained better results than studies that used the same experimental data. Ergonomic interventions can be done by means of obtained classification schema for future reductions in low back injuries. © 2008 Wiley Periodicals, Inc.     

Scheduling problems with the nonlinear effects of learning and deterioration

In this paper, we present both nonlinear job deterioration and nonlinear learning which exist simultaneously. Job deterioration and learning co-exist in many realistic scheduling situations. By the effects of learning and deterioration, we mean that the processing time of a job is defined by the increasing function of its execution start time and position in the sequence. The following objectives are considered: single-machine makespan and sum of completion times (square) and the maximum lateness. For the single-machine case, we derive polynomial time optimal solutions. For the case of an m-machine permutation flowshop, we present polynomial time optimal solutions for some special cases of the problems to minimize makespan and total completion time.     

PARSEC-process analysis with recipe support for etcher control

The authors describe PARSEC, a system developed to automate processing, perform endpoint signal analysis, and monitor wafer movement within the plasma area. The system provides automatic downloading of process recipes, detection of defined process problems by the automated analysis of endpoint signals, automatic archiving of these signals, and automated data logging for increased lot-tracking efficiency. The system hardware, software, support tools, implementation, performance and results are described     

Quantifying Software Validity by Sampling

The point of all validation techniques is to raise assurance about the program under study, but no current methods can be realistically thought to give 100% assurance that a validated program will perform correctly. There are currently no useful ways for quantifying how 'well-validated' a program is. One measure of program correctness is the proportion of elements in the program's input domain for which it fails to execute correctly, since the proportion is zero i.f.f. the program is correct. This proportion can be estimated statistically from the results of program tests and from prior subjective assessments of the program's correctness. Three examples are presented of methods for determining s-confidence bounds on the failure proportion. It is shown that there are reasonable conditions (for programs with a finite number of paths) for which ensuring the testing of all paths does not give better assurance of program correctness.     

A Bayes sensitivity analysis when using the beta distribution as aprior

Results that illustrate the determination of the parameters of a beta prior distribution when either the mean and one percentile or two percentiles are given are presented. Further results show how sensitive the parameters of the beta prior are to errors in the given values. The sensitivity of the probability distribution of the reliability of a system to errors in either the given mean and percentile or the given percentiles of the component beta priors is studied. Included in the study are several systems, ranging from simple ones that occur as subsystems of real systems up to a real type of system consisting of 74 components     

Psychometric properties of the Questionnaire on Stress in patients with Diabetes—Revised (QSD-R).

This study reports the psychometric properties of a 45-item diabetes-specific questionnaire, the Questionnaire on Stress in Patients with Diabetes—Revised (QSD-R), a modified and shortened version of the QSD (G. Duran et al; see record 1996-18805-001). The QSD-R was filled out by 1,930 individuals with insulin-dependent diabetes mellitus and noninsulin-dependent diabetes mellitus. Eight consistent scales were identified (values of Cronbach's α: .69–.81). The test-retest reliability for the total score after a 5-week interval was rtt?=?.63. The results provide evidence for the reliability and validity of this instrument. (PsycINFO Database Record (c) 2010 APA, all rights reserved)