A novel switched reluctance motor drive with optical graphicalprogramming technology

Due to magnetic nonlinearities, switched reluctance motor (SRM) drive control is complicated and normally requires a microprocessor or a digital signal processor. This paper presents a simple and reliable SRM drive using an innovative encoder based on optical graphical programming technology. There is no microprocessor in the drive, no A/D or D/A circuitry, with a drive system that matches the simplicity of the motor construction. It features a simple and effective control capability. Current waveform optimization for the encoder is carried out offline, for high efficiency, and programmed directly into the encoder. Experimental results validate the concept     

Ab‐initio investigation of chemical‐bond formation at the diamond‐like carbon surface

Diamond‐like carbon (DLC) is a promising material for tribology‐based applications. We investigate the susceptibility of the DLC surface to some characteristic molecules that are potentially present in various lubricants by means of ab‐initio calculations. We demonstrate that the strongest bond is formed between the oxygen atoms from the molecule and the metallic dopants present in the DLC. We present the first experimental evidence that proves the theoretical hypothesis. Copyright © 2014 John Wiley & Sons, Ltd.     

Inorganic nanoparticles and the microbiome

Routine exposure to inorganic nanoparticles (NPs) that are incorporated into consumer products such as foods/drinks, packaging materials, pharmaceuticals, and personal care products (e.g. cosmetics, sunscreens, shampoos) occurs on a daily basis. The standard everyday use of these products facilitates interactions between the incorporated inorganic NPs, mammalian tissues (e.g. skin, gastrointestinal tract, oral cavity), and the community of microbes that resides on these tissues. Changes to the microbiome have been linked to the initiation/ progression of many diseases and there is a growing interest focused on understanding how inorganic NPs can initiate these changes. As these mechanisms are revealed and defined, it may be possible to rationally design microbiotamodulating therapies based on inorganic NPs. In this article, we will: (i) provide a background on inorganic NPs that are commonly found in consumer products such as those that incorporate titanium, zinc, silver, silica, or iron, (ii) discuss how NP properties, microbiota composition, and the physiological microenvironment can mediate the effects that inorganic NPs have on the microbiota, and (iii) highlight opportunities for inorganic NP therapies that are designed to interact with, and navigate, the microbiome.     

Effects of post-mercury-control fly ash on fresh and hardened concrete properties

Activated carbon injection is the most mature technology for mercury capture from coal burning power plants; however, this technology increases the carbon content and mercury concentration in the fly ash. This, in turn, may reduce the suitability of fly ash for use in concrete and call into question the safety of using fly ash derived from this process. The focus of this paper is to investigate the reuse potential of post-mercury-control fly ash in concrete by examining the influence of three fly ashes derived from the activated carbon injection on the air content, compressive strength, permeability, and resistance to freezing and thawing of concrete mixtures. Laboratory testing confirmed the influence of the carbon on the air content of the concrete. However there was no difficulty in entraining air in activated carbon injection fly ash concretes within the recommended dosage range of the air-entraining admixture. All air-entrained fly ash concretes exhibited excellent characteristics in compressive strength (?32.0 MPa, 4641 psi at 28 days), resistance to chloride-ion penetration (moderate to low at 28 days of age) and freeze–thaw (?90 average durability factor after 300 cycles). The possible leaching of toxic elements including mercury from one fly ash sample used in this study was also evaluated using the US Environmental Protection Agency’s Toxicity Characteristic Leaching Procedure. The test results indicated that the leaching of toxic elements was much lower than the contamination level.     

Integrated continuous-time balanced filters for 16-b DSP interfaces

A fully integrated, low-distortion, balanced, continuous-time filter fabricated in 5-V, 1.6-μm CMOS is presented. Active RC structures are used in a leapfrog topology, with time constants set by integrated passive resistors and capacitors. Accurate tuning is achieved by selection of capacitor elements under the control of a new calibrator circuit. With a 2-V_rms differential input and output, the filter achieves -94-dB THD (total harmonic distortion) and 95-dB signal-to-noise ratio. Tuning accuracy is maintained to within ±5% of nominal over the commercial temperature range     

Expression of IL-16 in allergen-induced late-phase nasal responses and relation to topical glucocorticosteroid treatment

Allergen-induced late nasal responses (LNRs) are associated with a cellular infiltrate in which CD4+ cells are prominent. These cells have been shown to be the major cellular source of Th2-type cytokines. Mechanisms responsible for the local accumulation of CD4+ cells in the nasal mucosa after allergen exposure are unclear. IL-16 is a potent chemoattractant for CD4+ cells in vitro and may play a significant role in recruiting CD4+ cells in LNRs. We investigated the expression of IL-16 messenger RNA and immunoreactivity in nasal biopsy specimens from 17 subjects with allergic rhinitis. A biopsy specimen of the nasal inferior turbinate was obtained before and 24 hours after local nasal provocation with grass pollen extract after 6 weeks of treatment with either topical fluticasone propionate (n = 9) or placebo (n = 8) nasal spray twice daily. IL-16 mRNA-positive cells and IL-16-immunoreactive cells were identified in both the epithelium and the subepithelial tissue at baseline. Within the placebo-treated group, the numbers of epithelial and subepithelial IL-16 mRNA-positive cells and IL-16-immunoreactive cells were significantly increased 24 hours after challenge compared with baseline (p < 0.001). Topical glucocorticoid therapy resulted in a decrease in allergen-induced epithelial immunoreactive cells and subepithelial IL-16 mRNA-positive cells. The numbers of CD4+ cells increased after antigen challenge compared with baseline (p < 0.05), and this increase was inhibited by glucocorticoid treatment. There were significant correlations between epithelial and subepithelial IL-16 immunoreactivity and CD4+ cell infiltration after antigen challenge. The upregulation of IL-16 expression in allergic nasal mucosa after antigen challenge may have critical implications in the accumulation of CD4+ cells in response to antigen exposure. Steroid-mediated inhibition of IL-16 may be partly responsible for the decrease in local CD4+ cells after topical glucocorticoid therapy.     

Factors Affecting Chromium Carbide Precipitate Dissolution During Alloy Oxidation

Ferrous alloys containing significant volumefractions of chromium carbides were formulated so as tocontain an overall chromium level of 15% (by weight) buta nominal metal matrix chromium concentration of only 11%. Their oxidation at 850°C inpure oxygen led to either protectiveCr₂O₃ scale formation accompaniedby subsurface carbide dissolution or rapid growth ofiron-rich oxide scales associated with rapid alloy surface recession, which engulfedthe carbides before they could dissolve. Carbide sizewas important in austenitic alloys: an as-castFe-15Cr-0.5C alloy contained relatively coarse carbides and failed to form aCr₂O₃ scale, whereas the samealloy when hot-forged to produce very fine carbidesoxidized protectively. In ferritic alloys, however, evencoarse carbides dissolved sufficiently rapidly to provide the chromium flux necessary to formand maintain the growth of a Cr₂O₃scale, a result attributed to the high diffusivity ofthe ferrite phase. Small additions of silicon to theas-cast Fe-15Cr-0.5C alloy rendered it ferritic and led toprotective Cr₂O₃ growth. However,when the silicon-containing alloy was made austenitic(by the addition of nickel), it still formed aprotective Cr₂O₃ scale, showing that the principal function of silicon was inmodifying the scale-alloy interface.     

Field test technology relationships to cable quality

One of the most controversial issues in the field of cable technology involves trying to determine the status of used cable. There is no consensus within the industry or even among the so-called “experts” as to how this decision should be made. This paper identifies methods and limitations of techniques used by different organizations. These range from recommended practices to company guidelines. A model for insulation is presented. The results of the model are compared with common criteria used to evaluate power cable status. Criteria for any installation are addressed. Simply for convenience, detailed analysis will be applied specifically to electric submersible pump (ESP) cable