Sensitivity of transformer's hottest-spot and equivalent aging to selected parameters

In 1995, IEEE released a revised Transformer Loading Guide which includes an Annex G that contains an additional set of transformer temperature equations that incorporate oil-flow phenomena, changing ambient air temperature, and account for the change in resistivity of the winding due to heating. These new equations involve empirical exponent variables that account for properties of the transformer. This paper investigates sensitivity of hottest-spot temperature and equivalent aging of transformers with respect to these variables. By varying these variables under various load conditions and by Monte Carlo simulation with different probability distributions of these variables, their importance in the transformer model and their influence in modeling accuracy pertaining to the Annex G equations have been obtained.     

Approximate channel identification via δ‐signed correlation

A method of approximate channel identification is proposed that is based on a simplification of the correlation estimator. Despite the numerical simplification (no multiplications or additions are required, only comparisons and an accumulator), the performance of the proposed estimator is not significantly worse than that of the standard correlation estimator. A free (user selectable) parameter moves ‘smoothly’ from a situation with small sum‐squared channel estimation error but hard‐to‐identify channel peaks, to one with a larger sum‐squared estimation error but easy‐to‐identify channel peaks. The proposed estimator is shown to be biased and its behaviour is analysed in a number of situations. Applications of the proposed estimator to sparsity detection, symbol timing recovery and to the initialization of blind equalizers are suggested. Copyright © 2002 John Wiley & Sons, Ltd.     

Pulse-Frequency Characteristics in Bifurcation Problems

Generation of self-oscillations under unstable stationary states of nonlinear control systems, which may contain delay of complicated nature (the Andronov–Hopf bifurcation), and approximate design of self-oscillating states and their asymptotes are studied with the help of pulse-frequency characteristics of the linear component of a system.     

Optimal Massing Liquid Volume Determination by Energy Consumption Measurement: Study of the Influence of Some Physical Properties of Solvents and Products Used

This study tried to investigate, by the power comsumption technique, the influence of the powder's and solvent's properties on wet granulation.

It could be shown that the required amount of granulation liquid decreases when the particle size of the powder to be granulated increases. This relationship is however only true when the particle size distribution of the powder to be granulated is rather narrow.

Powders having the same solubility in different solvents require the same optimal liquid quantity for granulation, but the properties of resulting granules depend on surface tension and wetting properties of the solvent.

When the powder to be granulated contains crystallisation water, the temperature rising in the mixer can be sufficient to liberate this water, which must be taken into account in the optimal granulation liquid requirement.

The effect of a macromolecular binder (PVP, HPMC) has also been studied: the optimal liquid quantity required changes with the kind of binder used and the manufacturing process (binder used in solution or added as dry powder).

It was also shown that in the case of lactose, the optimal quantity of PVP or HPMC can be determined from the power consumption records and from the granules friability studies     

Bioactivity of antifouling paints based on organotin toxicants

This paper discusses the bioactivity of antifouling paints based on organotin toxicants, such as tributyltin fluoride (TBTF) and triphenyltin fluoride (TPTF). These compounds were used alone or mixed as the main toxicant in formulations. The use of TPTF or mixtures of TPTF and TBTF, with vinyl binders, led to paints with satisfactory bioactivity during a 24 months immersion period. With the same binders, TBTF alone provided only 12 months of antifouling protection. The correlation coefficients calculated from the fouling attachment values and the rosin content in the binder showed that the bioactivity of the tested formulations depended on the solubility of the toxicant in sea water and on the composition and solubility of the binders.     

Formation and elimination of surface ion milling defects in cadmium telluride,zinc sulphide and zinc selenide

The nature of damage produced by low energy Ar⁺ ion and Ar atom milling in the II–VI semiconductors CdTe, ZnS and ZnSe is studied in detail by conventional and high resolution transmission electron microscopy. It is demonstrated that the damage consists of dense arrays of small dislocation loops near to each milled surface. When ion or atom milling of this type is used for thin specimen preparation prior to microscopy the loop arrays can seriously obscure images and so complicate their interpretation. This problem concerning the presence of artifactual defects can be greatly reduced by the use of reactive I⁺ ion milling for specimen thinning and, in the case of CdTe, spurious dislocation loop formation can be completely suppressed.     

Integrated optimization of the use of information and hardware resources in data processing systems with controllable message size

The paper considers integrated optimization of a single-server semi-Markov queue with input conflicts, controllable message size, and a finite buffer with different types of storage organization. The optimization is based on an additive performance criterion.Translated from Kibernetika i Sistemnyi Analiz, No. 6, pp. 45–53, November–December, 1991.     

Energy function analysis of dynamic programming neural networks

All analytical examination of the energy function associated with a dynamic programming neural network is presented. The analysis is carried out in two steps. First, the locations and numbers of the minimum states for different components of the energy function are investigated in the extreme cases. A clearer insight into the energy function can be gained through the minimum states of different components. Secondly, the locations of the minimum states of the energy function using different parameter values are derived. It is shown that the minimum states can reside in regions which are regarded as valid solutions with certain conditions. Examples and simulation results are given to justify the validity of the theories developed.     

Improving stability of high-viscosity marine fuels based on residual fractions

Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 2, pp. 22–24, February, 1989.