Inactivation of Shigella boydii 18 IDPH and Listeria monocytogenes Scott A with power ultrasound at different acoustic energy densities and temperatures

ABSTRACT:  The effect of acoustic energy density (AED) on inactivation of Shigella boydii 18 IDPH and Listeria monocytogenes Scott A in a cell suspension was studied at sublethal temperatures and at AEDs of 0.49, 0.85, and 1.43 W/mL. The effect of temperature on ultrasonic inactivation of L. monocytogenes Scott A at 35, 50, and 65 °C was examined at an AED of 1.43 W/mL. Increasing AED increased the rate of inactivation for both S. boydii and L. monocytogenes . The destruction of S. boydii and L. monocytogenes followed 1st order kinetics in a 20-min treatment, except for S. boydii inactivation at 1.43 W/mL where a tailing effect was observed after 15 min. At sublethal temperatures, the D-values of S. boydii were 8.8, 4.3, and 2.5 min for AEDs of 0.49, 0.85, and 1.43 W/mL, whereas those for L. monocytogenes at the 3 AED levels were 31.5, 13.5, and 7.3 min, respectively. Ultrasonic treatment of L. monocytogenes at 35 and 50 °C enhanced inactivation. However, at 65 °C, application of ultrasound did not result in additional inactivation compared to thermal treatment alone at the same temperature. With the experimental conditions and the ultrasound system used in this study, an upper temperature limit for thermosonication was evident above which no added killing due to ultrasound was observed.     

Characterization of palladium supported on sulfated zirconia catalysts by DRIFTS, XAS and n-butane isomerization reaction in the presence of hydrogen

Palladium supported on sulfated zirconia (PdSZ) has been characterized by the n-butane isomerization reaction in the presence of hydrogen, X-ray absorption spectroscopy (XAS) and diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS) of adsorbed carbon monoxide. Catalyst calcination at 873 K followed by hydrogen reduction at 513 K results in the formation of 30–40 Å Pd metal clusters, but the surface can only weakly adsorb CO, though stronger than Pd-free, sulfated zirconia catalysts. In the presence of hydrogen, PdSZ has a lower n-butane isomerization activity than SZ, and the Pd function cannot stabilize the reaction at low H₂/n-butane ratios.     

Verfahrenstechnische und wirtschaftliche Vorteile der Kochextrusion im Vergleich zu herkömmlichen Verfahren der Lebensmittel-Industrie

Economic and process engineering advantages of extrusion cooking in comparison with conventional processes in the food industry . Extrusion cooking is introduced as a modern high-temperature short-time process. Possible process steps in extruder machine systems, such as continuous conveying, mixing, homogenizing and reactions, mechanical and thermal energy dissipation for plasticizing and modifying biopolymers, are explained. This process creates new products with completely new textures, for example in the snack and breakfast cereal sector, while on the other hand the extrusion process competes with long-standing conventional processes. The latter work slowly with low pressures, low temperatures and energy dissipation with high water contents in large batch-operated machines. The quality of extruder-cooked products depends on the extrusion system. The self-cleaning corotating twin-screw extruder with its narrow residence time spectrum is the optimum system. However, the counter-rotating intermeshing machine has certain advantages for products of low viscosity. The cooking time at high temperature is a matter of seconds, which serves to maintain the properties of the ingredients and active substances, while ensuring fast destruction of microorganisms. The end-products have a long shelf-life on account of their low process moisture content. Continuous extrusion cooking has economic advantages mainly because it replaces many batch processes and because extrusion is carried out entirely or almost entirely with the final moisture content, thus avoiding the necessity to evaporate huge quantities of water.     

Time Fractionation of Minor Lipids from Cold-Pressed Rapeseed Cake Using Supercritical CO<Subscript>2</Subscript>

This work explored the possibility of using supercritical carbon dioxide (SC-CO₂) to achieve fractionation of pre-pressed rapeseed (Brassica napus) cake oil at 30–50 MPa, at 40 or 80 °C, and increase the concentration of minor lipids (sterols, tocopherols, carotenoids) in the oil. Minor lipids are partially responsible for desirable antioxidant effects that protect against degradation and impart functional value to the oil. The weight and concentration of minor lipids in oil fractions collected during the first 60 min were analyzed. Cumulative oil yield increased with pressure, and with temperature at ≥40 MPa, but was lower at 80 °C than at 40 °C when working at pressure ≤35 MPa. Differences in solubility between the oil and minor lipids explained fractionation effects that were small for tocopherols. Unlike tocopherols, which are more soluble in SC-CO₂ than the oil, sterols and carotenoids are less soluble than the oil, and their concentration increased in the later stages of extraction, particularly at ≥40 MPa, when there was not enough oil to saturate the CO₂ phase. Because of the fractionating effects on rapeseed oil composition, there was an increase in the antioxidant activity of the oil in the second half as compared to the first half of the extraction. Consequently, this study suggests that SC-CO₂ extraction could be used to isolate vegetable oil fractions with increased functional value.     

Nonparametric analysis of clustered data in diagnostic trials: Estimation problems in small sample sizes

In diagnostic trials, clustered data are obtained when several subunits (e.g., organs or vessels) of the same patient are observed where no, several, or all subunits may be diseased or non-diseased as classified by a gold standard. In such a design, repeated measures appear in a natural way since the same patient is observed under different conditions by several readers and the repeated measures may have a quite involved correlation structure. A nonparametric method for clustered data in multiple reader studies to estimate the area under the ROC curve has been previously considered. The disadvantage of this procedure is that the test statistic (a quadratic form) can become negative in case of small samples. Therefore, a slightly different approach by weighting the estimators of the areas under the curves (AUC) is proposed. It is shown that the proposed new estimator of the covariance matrix of the weighted AUC estimators is always positive semidefinite. Simulation studies show that the new statistic maintains the pre-assigned type-I error level quite well even in case of small sample sizes. The method is motivated by a real data example where the previously suggested statistic becomes negative. This example demonstrates the advantage of the new method.     

Noise in off-axis type holograms including reconstruction- and CCD camera parameters

Phase and amplitude images as contained in digital holograms are commonly extracted via a process called “reconstruction.” Expressions for the expected noise in these images have been given in the past by several authors; however, the effect of the actual reconstruction process has not been fully appreciated. By starting with the Quantum Mechanical intensity distribution of the off-axis type interference pattern, then building the digital hologram on an electron-by-electron base while simultaneously reconstructing the phase/amplitude images and evaluating their noise levels, an expression is derived that consistently describes the noise in simulated and experimental phase/amplitude images and contains the reconstruction parameters. Because of the necessity to discretize the intensity distribution function, the digitization effects of an ideal CCD camera had to be included. Subsequently, this allowed a comparison between real and simulated holograms which then led to a comparison between the performance of an “ideal” CCD camera versus a real device. It was concluded that significant improvement of the phase and amplitude noise may be obtained if CCD cameras were optimized for digitizing intensity distributions at low sampling rates.     

Silicon Encapsulated Carbon Nanotubes

A dual stage process of depositing bamboo-like carbon nanotubes (BCNTs) by hot filament chemical vapor deposition (HFCVD) and coating Si using Radio frequency sputtering (RFS) technique. The films were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electron field emission studies (EFE). SEM results suggest a dense network of homogeneous silicon-coated BCNTs. From the comprehensive analysis of the results provided by these techniques emerges the picture of Si encapsulated BCNTs.