Binary ant colony optimization applied to variable screening in the Mahalanobis–Taguchi System

This work presents the application of the Mahalanobis–Taguchi System (MTS) to a dimensional problem in the automotive industry. The combinatorial optimization problem of variable selection is solved by the application of a recent version of binary ant colony optimization algorithm. Moreover, a comparison with respect to binary particle swarm optimization algorithm is also presented and a discussion regarding the numerical results is given.     

Highly translucent nanostructured glass-ceramic

Transparent and translucent glass-ceramics (GCs) are found in an increasing number of domestic and high-technology applications. In this paper, we evaluated and optimized the effects of two-stage heat treatments on the resulting crystalline phases and microstructure of a glass of the SiO₂–Li₂O–P₂O₅–TiO₂–CaO–ZnO–Al₂O₃ system. The objective was to develop a transparent nanostructured glass-ceramic (GC). After numerous heat treatment trials, we found that a long nucleation period of 72 h at 455 °C followed by a crystal growth treatment at 660 °C for 2 h resulted in a highly translucent GC having homogenously distributed nanocrystals. The relatively high amount of P₂O₅ (2.5 mol%) induced the formation of lithium disilicate as the main crystal phase. We thus developed a GC having crystals under 50 nm, with a high crystallized fraction (52%vol. Li₂Si₂O₅ and 26% vol Li₂SiO₃), transmittance of approximately 80% in the visible spectrum for 1.2 mm thick specimens, nano hardness of 8.7 ± 0.1 GPa (load of 400 mN), a high elastic modulus of 138 ± 3 GPa as measured by nanoindentation, and good flexural strength (350 ± 40 MPa) as measured by ball-on-3 balls tests. Due to its high content of Li⁺, this GC has the potential to be chemically strengthened and can be further developed to be used in a number of applications, such as on displays of electronic devices.     

Influence of Methanol on Prion Reduction during High Temperature and High Pressure Oleochemical Processes

Prion‐reduction in standard biodiesel processes is caused by acidic and alkaline conditions. In the alternative RepCat biodiesel process, efficient prion‐reduction can be achieved by high‐temperature/pressure. However, a possible increase in thermostability of prions in the presence of methanol during these conditions has not previously been investigated, and is verified in this work. Samples are spiked with prions, treated with methanol, and incubated at 220 °C at 80 bar for 30 min. No traces of protease‐resistant prion protein (as proxy for prions) are detected in tallow or glycerine (as the final by‐product) after treatment. Serial dilutions of spiked prions show at least 6 log₁₀ prion reduction. More importantly, similar effects are detected using milder conditions of 200 °C at 70 bar for 15 min, representing the worst‐case conditions of the process. In conclusion, this study shows that methanol does not increase the thermostability of prions and the RepCat process can efficiently eliminate prions and is therefore safe for the usage of category 1 tallow. Practical Applications: The study further supports the applicability of RepCat process in reducing prion‐contamination in the presence of methanol. Furthermore, the conditions leads to a considerable reduction of prions in glycerine obtained as by‐product.     

Cheaper membrane materials for microalgae dewatering

Among different strategies to reduce costs in microalgae dewatering process via cross-flow filtration, the one related to membrane material was investigated in order to be decreased. Several materials were tested, starting with the ones commonly used in membrane technology [ceramic, polysulfone (PSf) and polyacrylonitrile (PAN)] to the ones generally employed in packaging industry [acrylonitrile butadiene styrene (ABS), glycol-modified polyethylene terephthalate (PETG) and polylactic acid (PLA)], the latter being considerably cheaper. Experiments carried out showed promising results in terms of permeabilities for PSf–Pluronic^® F127 blended membranes and PAN membranes (11 ± 1 L/h/m²/bar and 22 ± 1 L/h/m²/bar, respectively, instead of 2 ± 2 L/h/m²/bar of PSf membranes), but with high related costs. PLA membranes showed good mechanical properties, biodegradability and price, but low permeability values (5 ± 1 L/h/m²/bar). PETG membranes showed attractive results in terms of costs and permeability, but poor mechanical properties. The polymer that offered the best results was the ABS that reached membrane permeabilities of 19 ± 1 L/h/m²/bar, maintaining good mechanical properties while filtering the microalgae Phaeodactylum tricornutum Bohlin. Thus, a novel functionality was found for these not so common polymers in microalgae dewatering. This indicates that use of these materials could also be considered in other aqueous micro/ultrafiltration applications. In addition, the biodegradable PLA polymer introduces a new concept of cheap and environmental friendly membrane in this application.     

Purification Processes and Market Potential of Bromelain in Brazil

Bromelain is the denomination given to the group of endoproteases obtained from members of Bromeliacea family. These enzymes have a wide range of proven applications and have been an object of study for worldwide researchers for decades. Over the years, several different downstream processes were studied in order to determine which technique would be worthwhile to be implemented in Brazil and provide the national market with such product. The objective of the present study is to relate the main studies in Brazil that has proven that bromelain purification can be cost-effective, in addition to the well-known benefits owned by such enzymes, and highlight the applications that create their market potential in the Brazilian market.     

Overall photocatalytic water splitting on Na2ZrxTi6−xO13 (x = 0, 1) nanobelts modified with metal oxide nanoparticles as cocatalysts

In this work, we present the preparation of Na₂Zr_xTi_6?xO₁₃ (x = 0, 1) nanobelts through a rapid solvocombustion method. The phases exhibited stable photocatalytic activity for overall water splitting under UV light. Effect of the annealing temperature on the physicochemical properties and the catalytic performance of the materials were studied. Na₂ZrTi₅O₁₃ exhibited a higher rate of H₂ evolution compared to Na₂Ti₆O₁₃, and it was attributed to the incorporation of Zr⁴⁺ in the structure, which generates a distortion in the octahedral sites of the structure. This distortion promoted an enhanced charge transport and a reduction in the recombination of the free carriers and a higher photocatalytic activity. The nanobelts were superficially modified through the deposition of metal oxide nanoparticles as cocatalyst, MO (M = Ni, Cu). The incorporation of metal oxide nanoparticles improved the charge separation process and the overall efficiency. An integral study of the structural, morphological, textural, optical and photoelectrochemical properties of the materials is presented and a charge transference mechanism on the semiconductor interface is proposed. The highest catalytic activity was obtained by Na₂ZrTi₅O₁₃ modified with CuO (2909 μmol g?¹ h^?1), and corresponds to an increase of 13.6 times the activity of the bare photocatalyst. This was attributed to an improved charge separation at the interface of n-type Na₂ZrTi₅O₁₃ and p-type CuO semiconductors. For the best of our knowledge, the activity exhibited for overall water splitting of Na₂Zr_xTi_6?xO₁₃ (x = 0, 1) nanobelts prepared by solvocombustion method and modified with the addition of MO nanoparticles in this work is higher compared to the reported in previous works.