Survival of Yersinia enterocolitica and Escherichia coli in spring water

Survival of pure and mixed cultures of Yersinia enterocolitica and Escherichia coli in sterile spring water stored at 4 degrees C was evaluated. Y. enterocolitica increased two or three logs during the first 3 weeks of incubation, and at the end of 64 weeks viable cells in numbers corresponding to the initial inoculum level were still detectable. However, after 1 week of incubation, the number of E. coli in water started to decrease and in 13 weeks time no E. coli was detected. More rapid decrease of E. coli was observed in mixed cultures.     

Ecophysiology of ochratoxigenic Aspergillus ochraceus and Penicillium verrucosum isolates. Predictive models for fungal spoilage prevention - a review

Ochratoxin A (OTA) is a secondary metabolite produced by several species of Aspergillus and Penicillium; among them Aspergillus ochraceus and Penicillium verrucosum are two ochratoxigenic species capable of growing in different climates and thus contamination of food crops with OTA can occur worldwide. OTA can be found in a wide range of foods such as cereals, coffee, cocoa, spices, beer, wine, dried vine fruit, grapes and meat products. OTA is toxic to animals, it presents neurotoxic, immunotoxic and nephrotoxic effects. It has been implicated in a human kidney disorder known as Balkan Endemic Nephropathy. This review focuses on the ecophysiology of ochratoxin-producing Aspergillus ochraceus and Penicillium verrucosum, the effect of environmental factors on their germination, mycelial growth, and OTA production. Knowledge of environmental conditions required for sucessive stages of fungal development represent the first step towards preventing mycotoxin formation. Predictive models for different stages of fungal development are presented, which allow prediction of the time before spoilage as a function of the abiotic factors. Finally, the implications of these studies in management of barley, coffee and grapes are described. This can help to identify the critical control points in their production, storage and distribution processes.     

Clinical investigation of traumatic injuries of permanent incisors in Izmir, Turkey

470 injured teeth of 370 patients who consulted the Dental Clinic of Ege University, Izmir, Turkey for examination or treatment between 1981-1993 were evaluated. Information concerning sex, age of patients at the time of injury, cause of trauma, number of injured teeth, type of tooth and type of trauma were recorded. More boys suffered traumatic injuries (64.8%) than girls (35.2%). Patients aged 11-15 years old exhibited the highest number of injuries (34.4%) followed by the 6-10 years old group (24.5%). Most injuries involved one tooth (60%) and maxillary central incisors were the most often affected teeth (66.2%). The leading cause of injury was undefined falls (45.1%). At the initial examination, cases seen after a long posttraumatic period showed more complications than those presented within a short time period. Educational programs about the importance of dental trauma, the benefits of immediate attendance and conservation of avulsed and fractured teeth would be very helpful for patients. Additionally improving the knowledge of the dental practitioner about trauma would be another important point in solving the problem.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

Inhibition of sulfide on the simultaneous removal of nitrate and p‐cresol by a denitrifying sludge

BACKGROUND: Many industrial discharges, such as those generated from petrochemical refineries, contain large amounts of sulfurous, nitrogenous and organic contaminants. Denitrification has emerged as a suitable technology for the simultaneous removal of these pollutants in a single reactor unit; however, more evidence is demanded to clarify the limitations of denitrification on the simultaneous removal of sulfide and phenolic contaminants and to optimize the biological process. The aim of this study was to evaluate the capacity of a denitrifying sludge to simultaneously convert sulfide and p‐cresol via denitrification. RESULTS: Sulfide was the preferred electron donor over p‐cresol, imposing a 5 h lag phase (required for complete sulfide removal) on organotrophic denitrification. Addition of sulfide (20 mg S^2? L^?1) to p‐cresol‐amended denitrifying cultures also decreased the reduction rate of nitrate and nitrite, as well as the production rate of nitrogen gas. Nitrite reduction rate was the most affected step by sulfide, decreasing from 35 to 21 mg N (g VSS d)^?1. A synergistic inhibitory effect of nitrate and sulfide was also observed on nitrite reduction. Despite the effects of sulfide on the respiratory rates monitored, complete removal of nitrate, sulfide and p‐cresol could be achieved after 48 h of incubation. CONCLUSION: Our results suggest that simultaneous removal of sulfide and p‐cresol could be achieved in denitrifying reactors, but a large hydraulic residence time may be required to sustain an efficient process due to inhibitory effects of sulfide. Copyright © 2008 Society of Chemical Industry     

Entanglement network and relaxation temperature dependence of single‐site catalyzed ethylene/1‐hexene copolymers

In this work, we investigate the linear viscoelastic response of high molecular weight ethylene/1‐hexene copolymers, characterized by a narrow molecular weight distribution and comonomer content in the range from 0 to 10 mol %. A variation in the entanglement plateau modulus has been found in agreement with the recently developed packing length model. The packing model applied to viscoelastic data suggests decreased values of the characteristic ratio, accordingly with recent computer simulation results. The flow activation energy increases as the side chain content increases. This feature is thought to be related to the mobility of the molecules. The presence of side branches due to the comonomer hinders the mobility of the molecules, and increases the thermal barrier for the segmental motion. Then in the comonomer content range studied, the increase of the flow activation energy goes parallel with a decrease in the characteristic ratio. This result suggests that more parameters than only the stiffness of the chain modulate the thermal dependence of viscoelastic properties. A more refined study is necessary combining experiments with computer simulations in order to elucidate these aspects. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008