Thermal diffusivity and porosity of solid materials by the electromagnetic ultrasonic technique. Part 3—simultaneous measurement of ultrasonic velocity and thermal diffusivity

The objective of this study is to evaluate simultaneously the time dependence of the thermal diffusivity of carbon-carbon composites (C/C composites) and their porosity during heat treatment using the electromagnetic ultrasonic technique. This paper describes two kinds of experiments conducted to confirm the principle for simultaneous measurement of both the ultrasonic velocity (used to evaluate the porosity) and the thermal diffusivity at room temperature. For each material, the samples used in both experiments were identical. The ultrasonic velocity of type 304 stainless steel and its thermal diffusivity were 5.85 km/s and 3.8 mm²/s with precisions of ±1.6 and ±8 percent, respectively. The ultrasonic velocity of a two-dimensional woven C/C composite and its thermal diffusivity were 2.86 km/s and 4.8 mm²/s with precisions of ±5.0 and ±8 percent, respectively. The results appear to indicate that the electromagnetic ultrasonic technique can measure the ultrasonic velocity and the thermal diffusivity simultaneously and that it is also applicable to C/C composites. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(5): 308–322, 1996     

Electron beam sterilization of cyclo olefin polymer leads to polymer degradation and production of alkyl radicals

We investigated the effects of electron‐beam (EB) sterilization on syringe barrels manufactured from cyclo olefin polymer (COP). The chemical structure of the polymer was determined by interpreting the ¹³C NMR and DEPT‐135 spectra of the COP resin. The antioxidants in the resin were identified by analyzing the liquid chromatography‐photo diode array‐mass spectrometry (LC‐PDA‐MS) data for the methanol extract of the resin and the gas chromatography‐mass spectrometry (GC‐MS) data for the supercritical methanol degradation products of the extract. NMR and LC‐PDA‐MS analyses revealed that EB sterilization produces degradation products in the COP main chain and reduces the quantity of the antioxidants in the COP resin. ESR spectra of the EB‐sterilized syringe barrels indicated the presence and location of alkyl radicals, which were generated in the COP main chain by EB sterilization. ESR analyses also indicated that the quantity of alkyl radicals decreased over time. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43498.     

Polyacene capacitors

We fabricated two types of polyacene capacitor with extremely stable polyacenic semiconductor (PAS) as the positive and negative electrodes. The first one is a coin-type PAS capacitor (six different sizes), which possesses large capacity with high reliability. Its capacity is much larger than that of the conventional electric double-layer capacitor which uses activated carbon as electrode. PAS capacitor can maintain more than 70% of the initial capacity even after 100 000 cycles. Moreover, this capacitor can be charged and discharged in a few minutes as well as at low rate. The second one is a cylinder-type PAS capacitor (diameter: 18 mm, height: 65 mm) which shows high capacity of 100 F and can discharge at the extremely high rate of 80 C. The coin-type PAS capacitor is currently used for memory back-up of electrical and communication equipment, and the cylinder-type is considered to be useful as power back-up for starting drive parts of electric equipment which needs high power density.     

Fluorescent in situ hybridization analysis of open lactic acid fermentation of kitchen refuse using rRNA-targeted oligonucleotide probes

Reproducible amounts of lactic acid accumulate in minced kitchen refuse under open conditions with intermittent pH neutralization [Sakai et al., Food Sci. Technol. Res., 6, 140 (2000)]. Here, we showed that such pH-controlled open fermentation of kitchen refuse reproducibly resulted a selective proliferation of a major lactic acid bacterial (LAB) species. In one experiment, the predominant microorganisms isolated during the early phase (6 h) were Gammaproteobacteria. In contrast, those that predominated during the late phase (48 h) were always Lactobacillus plantarum in three independent experiments. To further quantify the microbial community within open lactic acid fermentation, we performed fluorescent in situ hybridization (FISH) analysis targeting 16S (23S) rRNA. We designed two new group-specific DNA probes: LAC722(L) was active for most LAB including the genera Lactobacillus, Pediococcus, Leuconostoc and Weisella, whereas Lplan477 was specific for L. plantarum and its related species. We then optimized sample preparation using lysozyme and hybridization conditions including temperature, as well as the formamide concentration and the salt concentration in the washing buffer. We succeeded in quantification of microorganisms in semi-solid, complex biological materials such as minced kitchen refuse by taking color microphotographs in modified RGB balance on pre-coated slides. FISH analysis of the fermentation of kitchen refuse indicated that control of the pH swing leads to domination by the LAB population in minced kitchen refuse under open conditions. We also confirmed that L. plantarum, which generates lactic acid in high quantities but with low optical activity, became the dominant microorganism in kitchen refuse during the late phase of open fermentation.     

Developmental ability of cloned embryos from neural stem cells

The success rate is generally higher when cloning mice from embryonic stem (ES) cell nuclei than from somatic cell nuclei, suggesting that the embryonic nature or the undifferentiated state of the donor cell increases cloning efficiency. We assessed the developmental ability of cloned embryos derived from cultured neural stem cell (NSC) nuclei and compared the success rate with that of embryos cloned from other donor cells such as differentiated NSCs, cumulus cells, Sertoli cells and ES cells in the mouse. The transfer of two-cell cloned embryos derived from cultured NSC nuclei into surrogate mothers produced five live cloned mice. However, the success rate (0.5%) was higher in embryos cloned from cultured NSC nuclei than from differentiated NSCs (0%), but lower than that obtained by cloning mice from other cell nuclei (2.2-3.5%). Although the in vitro developmental potential to the two-cell stage of the cloned embryos derived from NSC nuclei (73%) was similar to that of the cloned embryos derived from other somatic cell nuclei (e.g., 85% in Sertoli cells and 75% in cumulus cells), the developmental rate to the morula-blastocyst stage was only 7%. This rate is remarkably lower than that produced from other somatic cells (e.g., 50% in Sertoli cells and 54% in cumulus cells). These results indicate that the undifferentiated state of neural cells does not enhance the cloning efficiency in mice and that the arrest point for in vitro development of cloned embryos depends on the donor cell type.     

Physicochemical properties of monosodium glutamate-compounded tapioca starch exceeds those of simple heat-moisture treated starch

Monosodium glutamate (GluNa)-compounded starch was prepared by heat-moisture treating a mixture of tapioca starch and GluNa. GluNa-compounded starch exhibited a higher gelatinization temperature and reduced swelling and solubility, essentially lower hardness of the granule center, and paste viscosity than those of the heat-moisture treated tapioca starch and the untreated starch. However, its appearance, unit chain length distribution, and α-amylase digestibility were similar to those of the heat-moisture treated tapioca. It is thus concluded that GluNa compounding is useful for providing a unique type of starch that possesses a less swollen and viscous texture than that produced with simple heat-moisture treatment.     

Occurrence and sources of perfluorinated surfactants in rivers in Japan

We analyzed perfluorinated surfactants (PFSs) in 20 river samples and 5 wastewater secondary effluent samples in Japan to reveal their occurrence and sources. Nine PFS species were determined: perfluorooctanesulfonate (PFOS), perfluorooctane sulfonamide (FOSA), perfluoroheptanoate (PFHpA), perfluorooctanoate (PFOA), perfluorononanoate (PFNA), perfluorodecanoate (PFDA), perfluoroundecanoate (PFUA), perfluorododecanoate (PFDDA), and perfluorotridecanoate (PFTDA). PFSs were detected in all rivers, revealing nationwide contamination of rivers. In particular, 11 out of 20 river samples exceeded New Jersey guidance for PFOA in drinking water (40 ng/L). PFOS, PFHpA, PFOA, and PFNA were major species in Japan. Concentrations of PFOS, PFHpA, and PFNA in rivers were strongly correlated with population density, suggesting that the chemicals were derived from urban activities. PFOA showed a significant but weak correlation. We used crotamiton, a marker of sewage effluent, for further source analysis. Concentrations of PFOS, PFHpA, and PFNAwere strongly correlated with those of crotamiton, and plots of secondary effluents fell near the regression lines of rivers, indicating that the PFOS, PFHpA, and PFNA in rivers were derived from sewage effluent. On the other hand, PFOA was found at remarkably high levels (54-192 ng/L) in seven river samples containing low levels of crotamiton, suggesting that it was derived from nonsewage point sources, as well as sewage effluent. The total fluxes of sewage-derived PFOS, PFHpA, PFOA, and PFNA from Japan were estimated to be 3.6, 2.6, 5.6, and 2.6 t/year, respectively. This is the first report to identify PFOA in several rivers, derived from nonsewage point sources, by using a marker of sewage effluent.     

Catalytic decomposition of biomass tars with iron oxide catalysts

Catalytic gasification of wood (Cedar) biomass was carried out using a specially designed flow-type double beds micro reactor in a two step process: temperature programmed non-catalytic steam gasification of biomass was performed in the first (top) bed at 200–850 °C followed by catalytic decomposition gasification of volatile matters (including tars) in the second (bottom) bed at a constant temperature, mainly 600 °C. Iron oxide catalysts, which transformed to Fe₃O₄ after use possessed catalytic activity in biomass tar decomposition. Above 90% of the volatile matters was gasified by the use of iron oxide catalyst (prepared from FeCl₃ and NH_3aq) at SV of 4.5 × 10³ h^?1. Tar was decomposed over the iron oxide catalysts followed by water gas shift reaction. Surface area of the iron oxide seemed to be an important factor for the catalytic tar decomposition. The activity of the iron oxide catalysts for tar decomposition seemed stable with cyclic use but the activity of the catalysts for the water gas shift reaction decreased with repeated use.     

Effect of anisotropic yield functions on the accuracy of hole expansion simulations

The deformation behavior of 780 MPa grade dual-phase steel sheet subjected to hole expansion is investigated both experimentally and analytically to clarify the effect of the material model (anisotropic yield function) on the predictive accuracy of finite element analysis of hole expansion. Biaxial tensile tests of the material were conducted; contours of plastic work and the directions of plastic strain rates are precisely measured and are in good agreement with those predicted from the Yld2000-2d yield function with an exponent of 4 ( [Barlat et al., 2003] and [Yoon et al., 2004]). Finite element and experimental analyses on the hole expansion of the material were conducted. The Yld2000-2d yield function with an exponent of 4 provides closer agreement with the experimental results than other yield functions. Consequently, the anisotropic yield functions significantly affect the predictive accuracy of the deformation behavior of the steel sheet subjected to hole expansion, and the biaxial tensile test is effective for identification of the appropriate anisotropic yield function to be used for hole expansion simulation.