Nutrient digestibility and endogenous protein losses in the foregut and small intestine of weaned dairy calves fed calf starters with conventional or enzyme-treated soybean meal

The aims of this experiment were (1) to compare the effects of a soybean meal with an enzymatic treatment (ESBM) to reduce the concentration of antinutritional factors versus a standard soybean meal (SBM) on foregut and small intestine digestion in weaned dairy calves and (2) to estimate the endogenous losses of crude protein (CP) in the small intestine. Our hypothesis was that a diet containing ESBM instead of SBM would improve ruminal and small intestine digestion and absorption of nutrients. A T-cannula was placed in the duodenum, and a second T-cannula was installed in the distal ileum of 12 Holstein calves at approximately 3 wk of age. Calves were weaned on d 42, and on d 50 they were assigned randomly to a quadruplicated 3 × 3 Latin square with 10-d periods. Digesta samples were collected on d 7 and 8 from the ileum and d 9 and 10 from the duodenum. The diets were fed for ad libitum intake and consisted of a calf starter (CS) of 20% CP with SBM as the main source of protein (CTRL), and an isonitrogenous CS with an ESBM instead of SBM (ENZT). A third diet with a low content of CP (10%) and no soy protein was fed to estimate endogenous N losses and digestibilities of test ingredients. Flows and digestibilities of nutrients were compared between CTRL and ENZT and their test ingredients (SBM vs. ESBM, respectively). Duodenal net flows of CP and total AA as well as ruminal microbial protein synthesis per kilogram of digested CP were greater, and flow of nonprotein N and CP true (corrected by endogenous and microbial flows) foregut digestibility were lower with ENZT than CTRL. The apparent small intestine digestibilities of CP and total AA were greater for ESBM than SBM, but there were no differences between the CTRL and ENZT diets. We observed no differences in digestibilities at the duodenum or ileum of starch or NDF, but true small intestine digestibilities of CP and all AA were greater with ENZT than CTRL. Total endogenous protein losses in the small intestine estimated from calves fed the low-CP with no soy protein diet were 37 ± 1.5 g of CP and 29 ± 1.4 g of AA/kg of DMI. These values may be considered the basal endogenous losses as they are similar to values obtained with the regression method, which estimates N losses when dietary N is null. Our results indicated that the inclusion of an ESBM improved the efficiency of ruminal microbial protein synthesis per digested kilogram of organic matter and CP, and increased CP and AA absorption in the small intestine despite a greater proportion of undigested dietary protein entering the duodenum.     

Efficient Low Dissipative High Order Schemes for Multiscale MHD Flows, II: Minimization of ∇·B Numerical Error

An adaptive numerical dissipation control in a class of high order filter methods for compressible MHD equations is systematically discussed. The filter schemes consist of a divergence-free preserving high order spatial base scheme with a filter approach which can be divergence-free preserving depending on the type of filter operator being used, the method of applying the filter step, and the type of flow problem to be considered. Some of these filter variants provide a natural and efficient way for the minimization of the divergence of the magnetic field (∇·B) numerical error in the sense that commonly used divergence cleaning is not required. Numerical experiments presented emphasize the performance of the ∇·B numerical error. Many levels of grid refinement and detailed comparison of the filter methods with several commonly used compressible MHD shock-capturing schemes will be illustratedA condensed version appears in the Proceedings of the International Conference on High Performance Scientific Computing, March 10-14, 2003, Hanoi, Vietnam. This is a revised version of a longer internal report, Feb. 19, 2004. The longer internal report was published as a RIACS Technical Report TR03.10, July 2003, NASA Ames Research Center     

A multigrid accelerated hybrid unstructured mesh method for 3D compressible turbulent flow

 A cell vertex finite volume method for the solution of steady compressible turbulent flow problems on unstructured hybrid meshes of tetrahedra, prisms, pyramids and hexahedra is described. These hybrid meshes are constructed by firstly discretising the computational domain using tetrahedral elements and then by merging certain tetrahedra. A one equation turbulence model is employed and the solution of the steady flow equations is obtained by explicit relaxation. The solution process is accelerated by the addition of a multigrid method, in which the coarse meshes are generated by agglomeration, and by parallelisation. The approach is shown to be effective for the simulation of a number of 3D flows of current practical interest. Sponsored by The Research Council of Norway, project number 125676/410 Dedicated to the memory of Prof. Mike Crisfield, a respected colleague     

Strengthening of concrete prisms using the plate-bonding technique

This paper presents the use of fracture mechanics for the plate bonding technique. Plates of steel or carbon-fibre reinforced plastic are bonded with an epoxy adhesive to rectangular concrete prisms and loaded in shear up to failure, what is normally known in fracture mechanics as mode II failure. In this special application a linear and a nonlinear approach are presented. The nonlinear equation derived for a realistic shear-deformation curve can only be used for numerical calculations. However, for simplified shear-deformation curves, the derived formula can be solved analytically. Results from tests, which are compared with the theory, are also presented.     

Removal of nitrates from groundwater through the use of artificial wetlands

Intensive fertilizer use has led to nitrate contamination of groundwater in many areas. This article examines the possibility of removing nitrates through the construction of artificial wetlands. A pilot study conducted in Denmark has found that the method is effective and economical, at least for small waterworks, though further treatment is necessary before an acceptable microbiological water quality is attained.     

The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

Coriolis effects in the dynamics of a rotating elastic structure

Summary Small oscillations of a rotating elasticum with a mass at the free end are investigated with Poincaré-Lindstedt series. It is shown that the mass moves on a figure-eight shaped curve in a direction determined by the sign of the angular velocity and hence that the Coriolis force influences the motion.     

Mathematical modelling of surface segregation in aluminum DC casting caused by exudation

A mathematical model for the development of a segregated layer of exudated droplets during DC casting of aluminum ingots is established. The model accounts for the metallostatic pressure driven interdendritic melt flow through the mushy zone by a Darcy type equation, the surface segregation due to this melt flow, and the decrease of the total solute concentration in different positions of the mush as a result of the exudation. The solution domain for the governing differential equations is constituted by the mushy zone of the cast. The main physical phenomena included in the model have been studied in a simple one dimensional case study.     

A new boundary-layer wind tunnel at the Danish Maritime Institute

The paper describes a new boundary-layer wind tunnel at the Danish Maritime Institute in Lyngby. The wind tunnel is of the open-circuit type and is integrated into a building raised for the purpose. The design was constrained by the need to provide a simulation of the atmospheric boundary layer (without thermal stratification) and alternatively a uniform flow without excessive turbulence.The wind tunnel has a working section of principal dimensions: length 20.8 m, width 2.6 m and height 1.8 m (adjustable from 1.8 to 2.3 m). The maximum wind speed in the working section when empty is about 26 m s^?1.Data acquisition, analysis and instrumentation in relation to the new wind tunnel are discussed and, finally, an example of a simulated natural wind is presented.     

On the off-design of a natural gas-fired combined cycle with CO2 capture

During the last 15 years cycles with CO₂ capture have been in focus, due to the growing concern over our climate. Often, a natural gas fired combined cycle with a chemical absorption plant for CO₂ capture from the flue gases have been used as a reference in comparisons between cycles. Neither the integration of the steam production for regeneration of amines in the combined cycle nor the off-design behaviour of such a plant has been extensively studied before.