Vanadium species in new catalysts for the selective oxidation of methane to formaldehyde: Activation of the catalytic sites

New vanadium oxide supported on mesoporous silica catalysts for the oxidation of methane to formaldehyde were investigated by infrared and Raman spectroscopies to identify and characterize the molecular structure of the most active and selective catalytic sites. In situ and operando experiments have been conducted in order to understand the redox and hydroxylation/dehydroxylation processes of the vanadium species. (SiO)₂VO(OH) species were identified in these catalysts in reaction conditions and shown to undergo a deprotonation at 580 °C under vacuum, leading to a site giving a photoluminescence band at 550 nm attributed to reverse radiative decay from the excited triplet state:

(V⁴⁺–O⁻)^*  (V⁵⁺O²⁻). An activation mechanism of vanadium monomeric species with electrophilic oxygen species is proposed.     

TNFα-Induced LDL Cholesterol Accumulation Involve Elevated LDLR Cell Surface Levels and SR-B1 Downregulation in Human Arterial Endothelial Cells

Excess lipid droplets are frequently observed in arterial endothelial cells at sites of advanced atherosclerotic plaques. Here, the role of tumor necrosis factor alpha (TNFα) in modulating the low-density lipoprotein (LDL) content in confluent primary human aortic endothelial cells (pHAECs) was investigated. TNFα promoted an up to 2 folds increase in cellular cholesterol, which was resistant to ACAT inhibition. The cholesterol increase was associated with increased ¹²⁵I-LDL surface binding. Using the non-hydrolysable label, Dil, TNFα could induce a massive increase in Dil-LDL by over 200 folds. The elevated intracellular Dil-LDL was blocked with excess unlabeled LDL and PCSK9, but not oxidized LDL (oxLDL), or apolipoprotein (apoE) depletion. Moreover, the TNFα-induced increase of LDL-derived lipids was elevated through lysosome inhibition. Using specific LDLR antibody, the Dil-LDL accumulation was reduced by over 99%. The effects of TNFα included an LDLR cell surface increase of 138%, and very large increases in ICAM-1 total and surface proteins, respectively. In contrast, that of scavenger receptor B1 (SR-B1) was reduced. Additionally, LDLR antibody bound rapidly in TNFα-treated cells by about 30 folds, inducing a migrating shift in the LDLR protein. The effect of TNFα on Dil-LDL accumulation was inhibited by the antioxidant tetramethythiourea (TMTU) dose-dependently, but not by inhibitors against NF-κB, stress kinases, ASK1, JNK, p38, or apoptosis caspases. Grown on Transwell inserts, TNFα did not enhance apical to basolateral LDL cholesterol or Dil release. It is concluded that TNFα promotes LDLR functions through combined increase at the cell surface and SR-B1 downregulation.     

Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties

Polyethylene-layered silicate nanocomposites were prepared by the in situ intercalative polymerization of ethylene by the so-called polymerization-filling technique and analyzed by transmission electron microscopy (TEM), X-ray diffraction analysis (XRD), differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Non-modified montmorillonite and hectorite were first treated by trimethylaluminum-depleted methylaluminoxane before being contacted by a Ti-based constrained geometry catalyst. The nanocomposite was formed by addition and polymerization of ethylene. In the absence of a chain transfer agent, ultra high molecular weight polyethylene was produced. The tensile properties of these nanocomposites were poor and essentially independent of the nature and content of the silicate. Upon hydrogen addition, the molecular weight of the polyethylene was decreased with parallel improvement of the tensile and shear moduli, in relation to the filler content. The exfoliation of the layered silicates was confirmed by XRD analysis and TEM observation. The mechanical kneading of the molten nanocomposites resulted in the partial collapse of the exfoliated structure driven by the thermodynamic stability of the layered filler.     

A fuzzy constraint-based approach to data reconciliation in material flow analysis

Data reconciliation consists in modifying noisy or unreliable data in order to make them consistent with a mathematical model (herein a material flow network). The conventional approach relies on least-squares minimization. Here, we use a fuzzy set-based approach, replacing Gaussian likelihood functions by fuzzy intervals, and a leximin criterion. We show that the setting of fuzzy sets provides a generalized approach to the choice of estimated values, that is more flexible and less dependent on oftentimes debatable probabilistic justifications. It potentially encompasses interval-based formulations and the least squares method, by choosing appropriate membership functions and aggregation operations. This paper also lays bare the fact that data reconciliation under the fuzzy set approach is viewed as an information fusion problem, as opposed to the statistical tradition which solves an estimation problem.     

Applying storm water management in Greek cities: learning from the European experience

This paper is based on the studies forming part of the European research project DayWater, which aims at the promotion of stormwater source control (participating countries: UK, France, Sweden, Denmark, Germany, The Netherlands and Greece). Source control techniques include all techniques (e.g. retention, infiltration, reuse) of stormwater treatment near its source, in contrast to end-of-pipe. In this paper we present: the different stormwater management issues across Europe; the specific stormwater management issues in Greece; source control techniques applied in European cities; Public policies for promoting source control techniques; Strategies of application of the aforementioned techniques and policies in Greek cities. In Greece, the question of stormwater treatment has not yet attracted a lot of attention. Wastewater management, flood prevention and fresh water scarcity issues are given priority instead. However source control stormwater management can contribute to the solution of all these problems. In many European cities source control techniques have been chosen for stormwater treatment because: a) they are less expensive than massive end-of-pipe treatment installations, b) they are more compatible with the natural water cycle, c) they reduce the overall stormwater flow and thus permit the expansion of cities without requesting reconstruction of the existing sewer networks. Different policy instruments (taxes, specific regulations and controls, information campaigns) have been applied in order to promote source control techniques. The main objective of this work is to discuss the possibility of applying similar techniques and policies in Greek cities.     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

From clay- to organoclay-film modified electrodes: tuning charge selectivity in ion exchange voltammetry

The surface of two natural smectite-type clay samples was chemically modified by covalent grafting of amine groups, by reaction with γ-aminopropyltriethoxysilane, which were easily protonated in HCl medium. Multisweep cyclic voltammograms of clay-film modified glassy carbon electrodes made of either the raw clays or the propylammonium-functionalized samples exposed to Ru(NH₃)₆³⁺ or Fe(CN)₆³⁻ electroactive probes were obtained. The results indicated a permselective behavior of these clay and organoclay-films based on either favorable or unfavorable electrostatic interactions. The cation-exchanging raw clay film modified electrodes exhibited accumulation properties for Ru(NH₃)₆³⁺ species while rejecting Fe(CN)₆³⁻, whereas the anion-exchanging organoclay coatings acted as a barrier against Ru(NH₃)₆³⁺ while increasing dramatically the concentration of Fe(CN)₆³⁻ species at the electrode surface. Strong binding of the probe to the organoclays resulted in a potential shift of ca. 0.1 V of the voltammetric signals characteristic of the Fe(CN)₆^3−/4− couple in the anodic direction. Their good preconcentration efficiency at low analyte concentration highlighted their interest for electroanalytical applications.     

Explicit reference modeling methodology in parametric CAD system

Today parametric associative CAD systems must help companies to create more efficient virtual development processes. While dealing with complex parts (e.g. the number of surfaces of the solid) no CAD modeling methodology is existing. Based on the analysis of industrial designers' practices as well as student practices on CAD, we identified key factors that lead to better performance. Our objective in this article is to propose a practical method for complex parts modeling in parametric CAD system. An illustration of the performances and the results obtained by this method are presented comparing the traditional method with the proposed one while using an academic case and then an industrial case.     

Complete Oxidation of Methane at Low Temperature over Pt Catalysts Supported on High Surface Area SnO2

The catalytic activity of Pt catalysts supported on high surface area tin(IV) oxide in the complete oxidation of CH₄ traces under lean conditions at low temperature was studied in the absence and in the presence of water (10 vol.%) or H₂S (100 vol.ppm). Their catalytic properties were compared to those of Pd/Al₂O₃ and Pt/Al₂O₃. In the absence of H₂S in the feed, Pt/SnO₂appears as a very promising catalyst for CH₄ oxidation, being even significantly more active under wet conditions than the best reference catalyst, Pd/Al₂O₃. Catalysts steamed-aged at 873 K were also studied in order to simulate long term ageing in real lean-burn NGV exhaust conditions. To this respect, Pt/SnO₂ is slightly less resistant than Pd/Al₂O₃. In the presence of H₂S, Pt/SnO₂catalysts are rapidly and almost completely poisoned, comparably to Pd/Al₂O₃and the catalytic activity is hardly restored upon oxidising treatment below 773 K. A synergetic effect between Pt and specific surface SnO₂sites active in CH₄oxidation is proposed to explain the superior catalytic behaviour of Pt/SnO₂.