Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

Analysis and jointing of polygonal road slabs

Conclusions 1. For anlaysis of circular (polygona) slabs which can be included in the category of absolutely rigid slabs, a practical approximate method of analysis has been developed and experimentally verified which permits determining the bending moments under centrally and eccentrically applied loads acting over a small circular area, as well as at any other points in the slab beyond the limits of the loaded area.2. Monolithic bonding of hexagonal road slabs up to 3–4 m² in area designed for the N-30 load results in increased design bending moments and, consequently, in thicker pavements. For these slabs it is expedient to use nonrigid joints, which do not transmit bending or torsional moments; however, these slabs must be placed on stabilized beds and their joints must be filled with waterproofing mastic.Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 5, pp. 19–22, September–October, 1974.     

Toxicity, accumulation and elimination studies of α-hexachlorocyclohexane (α-HCH) with freshwater organisms of different trophic levels

A short- and long-term toxicity study with α-hexachlorocyclohexane (α-HCH) was carried out with freshwater organisms of different trophic levels (algae, crustaceae and fishes). In this study mortality, immobilization, growth, reproduction, histopathologic changes and enzyme activities were chosen as criteria.Furthermore accumulation and elimination processes were investigated in separate organisms as well as the uptake of α-HCH by one organism and through a food-chain.Finally a tentative method for deriving an “ecological limit” for χ-HCH in surface water is described.     

The relative influence of wind,sunlight and temperature on user comfort in urban outdoor spaces

This paper presents the development of a comfort index that measures adaptivity in outdoor spaces. Over a 9-month period 649 people were surveyed in three locations, in temperatures between 10 and 28 °C. An exploratory factor analysis develops a 15-item scale of comfort that includes measures of adaptivity: clothing, exposure time and seating location. The scale is regressed on physical measures: average instantaneous wind speed; maximum wind speed; mean-exposed radiant temperature; mean-shaded radiant temperature and ambient temperature. The results model the relative contributions of the microclimatic factors for the comfort in the outdoor space. Analyses suggest gustiness and wind speed are most important in determining user satisfaction. There is strong support for the theory that people actively adapt to microclimatic conditions.     

Lead,cadmium, and arsenic residues in animal tissues in relation to those in their surrounding habitat

The relationships of the residues of lead, cadmium, and arsenic in animal tissues to those in surrounding vegetation and soil were determined in a natural habitat representing a wide range of such residues. The samples studied were selected from 18 different locations. Analyses were performed on a total of 113 animals, 332 plant specimens (representing 33 species), and 408 soil samples (taken at different depths). For the purpose of evaluating relationships, the samples from each location were averaged and reported as parts per million on a dry weight basis. The average lead residues from different locations ranged from 1.4–9.2 ppm in the liver, 45–195 in bones, 4–283 in vegetation, and 15–1399 in soil samples. The cadmium contents ranged from 1–27 ppm in the liver, 3–77 in bones, 0.5–5 in vegetation, and 1–10 in soil. The arsenic contents in different components of the ecosystem varied with an average of 1–9 ppm in liver, 0.6–94 in vegetation, and 7–655 in soil samples. The soil residues varied considerably according to the depth of sampling. Little variation was noted in different species of vegetation or in soil and vegetation samples according to the time and year of sampling.Statistical analyses performed on the averages indicated a significant correlation between vegetation and soil residues for all three elements, and also between animal to vegetation and animal to soil cadmium residues. Multiple linear correlations for all elements in soil, vegetation, and animal tissues were determined. The results indicated a possibility of an increase in cadmium in animal tissues depending upon the increased residues of this metal in the environment.     

Sensory evaluation of drinking water by consumer panels

The human senses play an important role in assessing the quality of food and of the environment. Particularly the chemical senses of taste and smell determine the pleasantness of foods and drinks and may provide a warning mechanism for the presence of more or less toxic contaminants. Even after the recent rapid development of powerful analytical techniques the human nose can easily detect trace amounts of chemicals at levels manytimes lower than the analytical detection limits.Although taste and odour assessment of drinking water has been practized inmany waterworks laboratories by small panels, relatively unreliable results were obtained and such sensory data played up till now only a minor role in the management of the water treatment plant. More sophisticated and reliable methods for sensory water quality evaluation are discussed. Special attention is given to the characteristics of the human senses of taste and smell, to which the methodology of sensory assessment should be better adapted. High numbers of observations on a sample are generally needed, for which purpose the use of large panels has to be realized. In this respect the help of large consumer panels is an alternative for the presently often used small laboratory groups. As an example the preliminary results of a large ongoing experiment of sensory water quality assessment by 2 consumer panels of 100 persons each in the Rotterdam area are discussed. Drinking water quality is judged at the consumer homes every week. The experiment started September 1979 and will be continued for one year.     

Contamination bacterienne d'une zone balneaire liee a sa frequentation

The bacterial contamination from bathers in the water and sand at a beach was investigated. Measurements were made of the composition of the cutaneous bacterial flora released by two bathers as well as the sensitivity of the main contaminants to solar radiation. The variations in bacterial concentration of the sea water and sand were determined at the sea shore over three complete day cycles. Broadly speaking, the concentration of some bacteria increases with the frequency with which the beach is used. Nevertheless, short-period variations seem to be masked by the opposing effects of solar radiation and bathers.     

铝酸钙水泥、硅酸盐水泥和β-半水石膏混合物中钙矾石的膨胀性能

本文利用现场同步加速X-射线衍射、等温量热仪和膨胀测量等手段,研究了在20℃,100%相对湿度下,由25%(重量比)的铝酸钙水泥、12.5%的硅酸盐水泥、12.5%的β-半水石膏和50%的水组成的浆体的水化。水化伊始,首先形成了石膏和钙矾石,同时半水石膏也相应消耗(0-45min内)。随后石膏继续消耗,钙矾石持续形成,2h45min后石膏消耗完毕,铝酸盐-AFm开始形成,同时钙矾石的数量在7h内保持不变。热曲线的第一个峰源自机械搅拌、初始润湿和溶解,还有钙矾石和石膏的形成,第二个峰为石膏被钙矾石所替代,第三个对应于铝酸盐-AFm的形成。石膏被钙矾石替代伴随着0.7%平均线性膨胀。     

Noise impact caused by electrical energy substations in the city of Curitiba, Brazil

This survey is intended to characterize the noise impact due to electrical energy substations in the city of Curitiba over the population living in their vicinity. This impact has been studied with the aid of a computational tool capable of mapping the acoustical field of substations and their vicinity. Several factors have been considered in this survey: (1) sound power of the transformers; (2) vehicle flow on the surrounding roads; (3) positioning of the firewalls, buildings and walls; and (4) terrain topography. Four substations have been analyzed, and an acoustical map has been traced for each of them. With these maps it was possible to visualize what was the incident noise level on the building facades. The predicted noise levels have been compared to the environmental legislation of the noise emissions in effect in the city.