Optical matching of a slowly extracted beam with transport line

In order to define the optical parameters of a slowly extracted beam at the entrance of the extraction channel and to realize optical matching with the beam line, the outgoing separatrix was measured at HIMAC. Modifying the lattice parameters of the ring model according to the measurement result, the simulation result makes it possible to predict the optical parameters at the extraction channel. As a result, it was experimentally verified that optical matching of the slowly extracted beam with the transport line was realized. The measured beam size and dispersion functions were in good agreement with the calculation result at each monitor in the transport line. Particle tracking also predicts the beam profile at each profile monitor in the beam line. Further, a quasi-parallel beam was demonstrated by changing the beam optics in the beam line.     

In Situ Observation of Deformation in Semi-solid Fe-C Alloys at High Shear Rate

Synchrotron X-ray radiography at 125 frames per second was used to study deformation mechanisms in semi-solid Fe-C alloys at high solid fraction and shear strain rates of 10^?1/s. An image correlation approach was also used to quantify the shear strain fields and study shear-induced dilation and the origin of shear cracking. It was shown that, at high solid fraction (90 to 93 pct solid), rearrangement including rotation and translation of solid particles became restricted and shear strain localized into narrow liquid-filled channels/fissures. Shear cracking was shown to originate from inadequate liquid flow into the expanding spaces between solid particles caused by shear-induced dilation. At lower solid fraction (~85 pct solid), solid particles rearranged with a significantly higher component of rotation leading to more shear-induced dilation and a wider shear band.     

Optical Fiber Cable Measurements in the Field

The optical fiber cable measurement instruments developed by NTF for field use in the 1.3 μm wavelength are discussed. The properties of a stabilized optical light source for single-mode fiber attenuation measurement, optical time-domain reflectometer using a Q-switched Nd:YAG laser as a light source, and chromatic dispersion measurement instrument are described. From the measurement results, these instruments are revealed to be suitable in constructing and maintaining singlemode fiber optical transmission lines.     

Reduction of in vitro allergenicity of buckwheat Fag e 1 through the Maillard-type glycosylation with polysaccharides

A major allergenic protein of buckwheat, Fag e 1 prepared from common buckwheat (Fagopyrum esculentum), was covalently linked with food-grade polysaccharides, arabinogalactan or xyloglucan through the controlled dry-heating at 60 °C under 65% relative humidity. The introduction of polysaccharide chain onto the molecular surface of Fag e 1 reduced the allergenicity of Fag e 1. The results revealed that the Maillard-type glycosylation of Fag e 1 with polysaccharides brought about a drastic reduction of the reactivity against human sera of buckwheat-allergy subjects, using immuno dot-blotting, QCM analysis and ELISA. In addition, the glycosylation of Fag e 1 yielded a great improvement of its surface functionality. Solubility of Fag e 1 at the neutral pH was substantially increased up to 13.5 times and 9.6 times by the conjugation with arabinogalactan and xyloglucan, respectively. Emulsifying properties of Fag e 1 were also improved by the glycosylation, of which both emulsifying activity and emulsion stability were more than 6 times higher than those of the native protein.     

A 60-ns 16-Mbit DRAM with a minimized sensing delay caused by bit-line stray capacitance

Discusses three new techniques that were implemented in a CMOS 60-ns 16-Mbit DRAM device. (1) A two-step half-conductive-state technique was used to control the conductivity of latch transistors, thus minimizing the time delay caused by bit-line stray capacitance. (2) The 'split-block row decoder' technique enabled the decoder layout within the 2.9- mu m cell pitch required for 16-Mbit integration density. The three transistors that are required per word line were split into two and one, placed on both sides of each word line, and alternately reversed on each side of the 2-Mbit cell array. (3) Additional dummy cells were added to the vacant spaces resulting from use of a twisted bit-line architecture, which reduces stray capacitance between adjacent bit lines. The overhead space required for all the dummy cells and twisted bit lines was thus held at 2.6 percent of the entire chip area.<>     

The effect of inlet pressure distortion on the performance of an axisymmetric compact tube heat exchanger with radial counter flow type for hypersonic pre-cooled aero-engine

The compact tube heat exchanger located behind the air-intake can achieve quick cooling of high-temperature air to ensure the normal operation of the pre-cooled aeroengine. It has great impact on the engine’s performance. The total pressure distribution at the heat exchanger inlet is inevitably uneven due to the influence of the air-intake. This paper studies the effect of three typical inlet distortions with different amplitudes using porous model and dual cell model. The results indicated that the outlet total pressure distortion is not sensitive to the inlet total pressure distortion. However, it affects the total pressure recovery and the total temperature distortion at the outlet by altering the pressure loss in the heat exchanger upstream and the flux distribution at the heat-transfer-zone entrance, respectively. This leads to a reduction of heat transfer. The effect of inlet distortions varies with distortion type. And it becomes more severe with increasing distortion.

     

Highly reliable oxide‐semiconductor TFT for AMOLED displays

Abstract— The stability and reliability of oxide‐semiconductor TFTs were investigated. The contact material to the oxide semiconductor affected the thermal stability of the TFT, and a molybdenum‐contact source/drain showed good stability. And the passivating film and TFT structure affected the stability against bias stress and humidity stress, and dc‐sputtered Al²O³ passivation and fully covered channel structure with an etching stopper or source/drain showed good reliability. Moreover, high photo‐stability was confirmed by the bias‐enhanced photo‐irradiation stress test. An 11.7‐in.‐diagonal qHD AMOLED display was demonstrated to provide an applicable solution for a large‐sized OLED and an ultra‐high‐definition LCD‐TV mass production.