Infra-red optical loss increase for silica fibre in cable filled with water

Loss increase characteristics of optical fibre in cable filled with water are reported. Drastic loss increase around 1.24 ?m is observed for both graded-index and single-mode fibres. The origin of the loss increase is found to be due to hydrogen gas diffused into the silica glass interstitially.     

Role of Cooper pairs for the generation of entangled photon pairs from single quantum dots

Generation of entangled photon pairs from semiconductor quantum dots (QDs) is highly desirable for realizing practical solid-state photon sources for quantum information processing and quantum cryptography. However, the energy splitting of exciton states in QDs almost prevent the generation of entangled photon pairs. This paper discusses the new possibility with the injection of electron as well as hole Cooper pairs into QDs.     

Evaluation of Lysophospholipid Measurement in Cerebrospinal Fluid Samples using Liquid Chromatography–Tandem Mass Spectrometry

A quantification system for lysophospholipids (lysoPL) was developed, especially for blood samples, using liquid chromatography–tandem mass spectrometry (LC–MS/MS). However, the lysoPL measurement in cerebrospinal fluid (CSF) has not been validated. Therefore, the present study aimed to validate the lysoPL measurement using CSF samples and to elucidate the possible clinical significance of the lysoPL measurement in CSF. For the validation, we observed a good precision and linearity in a sample with high lysoPL levels. The concentrations of lysoPL changed after incubation but the changes were smaller than those observed for serum samples. Moreover, we observed that the CSF levels of 16:0, 18:0 lysophosphatidylcholine, and 18:0, 18:1, and 20:4 lysophosphatidic acid were significantly higher in subjects with central nervous system invasion caused by hematological malignancies or carcinoma than in subjects with no abnormal CSF test results. In conclusion, an LC–MS/MS quantification system for lysoPL in CSF might be useful and could be applied to clinical laboratory testing.     

Temperature-responsive culture surfaces for insect cell sheets to fabricate a bioactuator

ABSTRACT

For the first time, we have fabricated insect-derived cell sheets by using temperature-responsive culture surfaces having a phase-transition temperature below 25°C. We prepared the temperature-responsive cell culture surfaces (tissue culture polystyrene, TCPS) by grafting a copolymeric gel consisting of hydrophobic N-tert-butylacrylamide (tBAAm) and N-isopropylacrylamide (IPAAm) units. First, to characterize the hydrophilic and hydrophobic properties of the copolymeric gel-grafted surfaces, static water contact angles of each surface were measured at various temperatures. By increasing the amount of tBAAm in the grafted copolymeric gel, the transition temperature of the gel was shifted to lower temperatures. At 25°C, the grafted copolymeric gel was dehydrated, and the insect-derived cells (AeAl2 cells) adhered on all the copolymeric gel-grafted surfaces. At 20°C, AeAl2 cells cannot adhere on the P(IPAAm-1.62tBAAm)-TCPS surface (the initial molar ratio of IPAAm and tBAAm (tBAAm?=?1.62 mol%)) better than on other surfaces (TCPS and tBAAm?=?4.88, 8.17 mol%). These two findings implied that the lower critical solution temperature of the copolymeric gel-grafted-TCPS existed from 20°C to 25°C. The laminin-coated P(IPAAm-1.62tBAAm)-TCPS surface showed temperature-dependent cell attachment and detachment properties, while AeAl2 cells were not detached from the extracellular matrix uncoated P(IPAAm-1.62tBAAm)-TCPS surface. AeAl2 cells and insect muscle cells were harvested as the respective sheets.     

Control of colloidal behavior of polystyrene latex nanoparticles and their cytotoxicity toward yeast cells using water-soluble polymers

Positively charged polystyrene latex (PSL) nanoparticles (NPs) dispersed in physiological saline (154?mM NaCl solution) are taken up by yeast cells. However, in low ionic strength solutions, the yeast cells are covered with the NPs, leading to cell death. The environmental conditions under which NPs are taken up are therefore limited. In this study, we attempted to control the uptake of positively charged PSL NPs by Saccharomyces cerevisiae in 5?mM NaCl solution using a water-soluble polymer. Addition of a small amount of anionic sodium carboxymethylcellulose (CMC), which has a carboxyl group, to 5?mM NaCl solution allowed the uptake of PSL NPs by living yeast cells. In contrast, non-ionic methylcellulose did not affect the NP behavior. This is because the negatively charged CMC adhered to the positively charged PSL NP surfaces and the surface charge changed from positive to negative. Atomic force microscopy using a single-NP probe consisting of one NP immobilized on the flattened end of the silicon nitride tip showed that CMC significantly reduced the interaction force between a negatively charged living yeast cell and a positively charged PSL NP.     

Determination of various constituent elements of polyethylene terephthalate bottles used for beverages in Japan

Polyethylene terephthalate (PET) bottles are some of the most commonly used containers for beverages. During the manufacturing process of PET resin in Japan, metallic catalysts such as Sb and Ge are widely used, with other metals or metallic compounds also being employed to improve the quality of PET bottles. However, few reports into the contents of such elements exist. Thus, we herein report the concentrations of 34 elements (ie, Li, B, Na, Mg, Al, P, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Rb, Sr, Zr, Mo, Ag, Cd, Sn, Sb, Cs, Ba, W, Pb, and U) in 16 samples of unused virgin PET bottles for beverages. The measurement was performed by inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS), and these bottles were found to contain five main elements (ie, <0.5- to 50-mg/kg Ge, <1- to 26-mg/kg Ti, <0.1- to 279-mg/kg Sb, <10- to 48-mg/kg P, and <0.5- to 53-mg/kg Co) that were used as polymerisation catalysts, stabilisers, oxidation catalysts, and bluing agents. Furthermore, when these residual element concentrations in 21 commercial mineral-water PET bottles were determined, there was no significant difference from unused bottles.     

Analysis on temperature-dependent deployment behavior of bi-stable composite rods

Bi-stable composite rods attract many researchers to investigate the mechanical and deployment behaviors for possible application to space deployable structures. Operation requires the bi-stable composites to be in a compact form prior to deployment. The deployment behavior is influenced by the storage conditions and the environmental temperature, of which, the latter is focused on in the present study. This study utilizes plain woven carbon fabrics composites to make bi-stable composites. Temperature-dependent mechanical properties of bi-stable composites are measured, and temperature-dependent deployment forces of bi-stable rods are evaluated using analytical formulations and finite element simulations with the measured properties.     

Jamming layered membrane gripper mechanism for grasping differently shaped-objects without excessive pushing force for search and rescue missions

A gripper comprising a jamming membrane was developed with the capability of grasping collapsible, soft, and fragile objects without applying heavy pressure. In disaster sites, it is necessary for robots to grab various types of objects, such as fragile objects. Deformable grippers that contain bags filled with powder cannot handle collapsible or soft objects without excessive pressure. Changing powder density relatively by changing inner volume is one approach to overcome this problem. By expanding the concept and simplifying the variable inner volume of the gripping mechanism, we developed a jamming membrane comprising the following three layers: outer layer and inner layer made of rubber and a powder layer in between the outer and inner rubber layer. This jamming membrane allows collapsible, soft, or fragile objects to be held securely without applying too much pressure. We designed and developed a prototype of the jamming membrane gripper. Our experiments confirmed the validity of the proposed jamming membrane mechanism.