Not Oligomers but Amyloids are Cytotoxic in the Membrane‐Mediated Amyloidogenesis of Amyloid‐β Peptides

The formation of neurotoxic aggregates by amyloid‐β peptide (Aβ) is considered to be a key step in the onset of Alzheimer's disease. It is widely accepted that oligomers are more neurotoxic than amyloid fibrils in the aqueous‐phase aggregation of Aβ. Membrane‐mediated amyloidogenesis is also relevant to the pathology, although the relationship between the aggregate size and cytotoxicity has remained elusive. Here, aggregation processes of Aβ on living cells and cytotoxic events were monitored by fluorescence techniques. Aβ formed amyloids after forming oligomers composed of ≈10 Aβ molecules. The formation of amyloids was necessary to activate apoptotic caspase‐3 and reduce the ability of the cell to proliferate; this indicated that amyloid formation is a key event in Aβ‐induced cytotoxicity.     

Kinetic Study of the Scavenging Reaction of the Aroxyl Radical by Eight Kinds of Vegetable Oils in Solution

A detailed kinetic study was performed for the reaction of the aroxyl radical (ArO?) with eight vegetable oils 1–8, which contain different concentrations of α‐, β‐, γ‐, and δ‐tocopherols and ‐tocotrienols (‐Tocs and ‐Toc‐3s). The second‐order rate constants (k_s) and aroxyl radical absorption capacity (ARAC) values for the reaction of ArO? with vegetable oils 1–8 (rice bran 1, perilla 2, rapeseed 3, safflower 4, grape seed 5, sesame 6, extra virgin olive 7, and olive oils 8) were measured in ethanol/chloroform/D₂O (50:50:1, v/v/v) solution at 25 °C using stopped‐flow spectrophotometry. The k_s value (16.1 × 10^?3 L g^?1 s^?1) of rice bran oil 1 with the highest activity was 8.0 times larger than that (2.02 × 10^?3) of olive oil 8 with the lowest activity. The concentrations (in mg 100 g^?1) of α‐, β‐, γ‐, and δ‐Tocs and ‐Toc‐3s contained in the vegetable oils 1–8 were determined using high performance liquid chromatography‐mass spectrometry/mass spectrometry (HPLC‐MS/MS). From these results, it was clarified that the ArO?‐scavenging rates (k_s) (i.e., the relative ARAC value) obtained for the vegetable oils 1–8 may be well explained as the sum of the product of the rate constant () and the concentration ([AOH‐i]/10⁵) of AOH‐i (Tocs and Toc‐3s) included in vegetable oils. The results suggest that the ARAC assay method might be used in the evaluation of antioxidant activity of general food extracts.     

Effect of silicate incorporation on in vivo responses of α-tricalcium phosphate ceramics

In addition to calcium phosphate-based ceramics, glass-based materials have been utilized as bone substitutes, and silicate in these materials has been suggested to contribute to their ability to stimulate bone repair. In this study, a silicate-containing α-tricalcium phosphate (α-TCP) ceramic was prepared using a wet chemical process. Porous granules composed of silicate-containing α-TCP, for which the starting composition had a molar ratio of 0.05 for Si/(P + Si), and silicate-free α-TCP were prepared and evaluated in vivo. When implanted into bone defects that were created in rat femurs, α-TCP ceramics either with or without silicate were biodegraded, generating a hybrid tissue composed of residual ceramic granules and newly formed bone, which had a tissue architecture similar to physiological trabecular structures, and aided regeneration of the bone defects. Supplementation with silicate significantly promoted osteogenesis and delayed biodegradation of α-TCP. These results suggest that silicate-containing α-TCP is advantageous for initial skeletal fixation and wound regeneration in bone repair.     

(4<Emphasis Type="Italic">Z</Emphasis>,15<Emphasis Type="Italic">Z</Emphasis>)-Octadecadienoic Acid Inhibits Glycogen Synthase Kinase-3β and Glucose Production in H4IIE Cells

Many uncommon non-methylene-interrupted fatty acids (NMI FA) are present in limpet gonads, but their biological properties remain unknown. To investigate new biological effects of naturally occurring NMI FA in eukaryotic cells, the biological activities of structurally analogous (4Z,15Z)-octadecadienoic acid (1), (9Z,20Z)-tricosadienoic acid (2), and (12Z,23Z)-hexacosadienoic acid (3) were examined by using a yeast-based drug-screening system using the Ca²⁺-sensitive mutant strain, Saccharomyces cerevisiae (zds1Δ erg3Δ pdr1Δ pdr3Δ). Among 1–3, 1 showed restored growth activity at a dose of 80 µg/disc in the mutant yeast strain. This phenotype suggests that 1 suppresses Ca²⁺-signaling of the mutant yeast through inhibition of glycogen synthase kinase-3β (GSK-3β) or calcineurin pathways or both. From this result, the inhibitory activity of 1–3 against GSK-3β was further determined. 1–3 showed potent inhibitory activity against GSK-3β with IC₅₀ values ranging from 8.7 to 21.9 µM. Inhibition of GSK-3β reduces gene expression of the gluconeogenic key enzymes in liver, so we analyzed glucose production in rat hepatoma H4IIE cells to assess GSK-3β inhibitory activity of 1–3. Acid 1 inhibited glucose production at 25 µM in H4IIE cells. Our results would open up new possibilities for an anti-diabetic effect of 1 and might provide important insights into understanding the biological properties of naturally occurring NMI FA.     

Surface wettability improvement of silicone elastomers synthesized with water‐soluble polyacrylic acid molds

The aim of this work was to evaluate the use of water‐soluble hydrophilic plastic molds for preparing siloxane based random copolymers and for enhancing the surface wettability of resultant polymers, with a view for contact lens manufacture. The random copolymer consisted of silicone monomers and a small amount of N‐vinyl‐2‐pyrrolidone (NVP) along with vinyl acetate and diethyleneglycoldiallylether as a crosslinker. The surface of this copolymer, which faced against a polyacrylic acid (PAA) mold, showed a higher degree of wettability compared to that obtained against a hydrophobic polypropylene (PP) mold. After heating at 80°C for 4 h, the surface of this copolymer became hydrophobic. When it was immersed in water, however, the high degree of surface wettability regained within 30 s, whereas no significant change in wettability was observed for the PP‐facing surface. The results obtained from X‐ray photoelectron spectroscopy indicated that the polar fraction, which is attributed to NVP fractions of the copolymer, concentrated at the vicinity of the PAA facing surface and, in consequence, improved the surface wettability. This surface also showed a dynamic rearrangement of the wettability in response to changes of the surrounding environment. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3786–3789, 2003     

Development of x-ray laminography under an x-ray microscopic condition

An x-ray laminography system under an x-ray microscopic condition was developed to obtain a three-dimensional structure of laterally-extended planar objects which were difficult to observe by x-ray tomography. An x-ray laminography technique was introduced to an x-ray transmission microscope with zone plate optics. Three prototype sample holders were evaluated for x-ray imaging laminography. Layered copper grid sheets were imaged as a laminated sample. Diatomite powder on a silicon nitride membrane was measured to confirm the applicability of this method to non-planar micro-specimens placed on the membrane. The three-dimensional information of diatom shells on the membrane was obtained at a spatial resolution of sub-micron. Images of biological cells on the membrane were also obtained by using a Zernike phase contrast technique.     

Evaluation of two-dimensional strain distribution by STEM/NBD

We proposed a strain mapping technique by Nano Beam electron Diffraction (NBD) combined with an energy filter (EF) and a scanning transmission electron microscopy (STEM) function. The STEM function improves the accuracy of a position where a diffraction pattern is acquired. The EF excludes inelastic scattering and enables novel numerical processing for the appropriate measurement of distances between diffraction disks. Using this technique, strain distributions were measured for two different types of p-MOSFETs, i.e., source/drain regions of each MOSFET is composed of different types of silicide, and the difference of their strain distributions in the channel region was confirmed. The proposed method was able to clarify that the strain distributions are quite different depending on the silicide materials even if the exterior of the MOSFETs was almost identical.     

SYNTHESIS OF 1-BROMO-6H-BENZO[CD]PYREN-6-ONE

1-Bromonaphthanthrone (1-bromo-6H-benzo[cd]pyren-6-one), a useful starting material for the synthesis of undecacyclic aromatic hydrocarbons, was synthesized by means of glycerol condensation of 1-bromopyrene. The structure of the synthetic product was confirmed by NMR measurements and the ¹ H and ¹³ C chemical shifts were completely assigned. Although the synthetic method provided three possible isomers, 1-, 3-, and 5-bromonaphthanthrone, only 1-bromonaphthanthorone was obtained as a final product. An explanation for the regioselectivity was given in terms of the charge distribution obtained by molecular orbital calculations.     

Optical properties and microstructures of Pd-free Ag–Au–Pt–Cu dental alloys

Nine experimental Pd-free Ag–Au–Pt–Cu dental alloys containing 10 at.% Pt and 10–35 at.% Au were prepared and their optical properties and microstructures were investigated by means of spectrophotometric colorimetry, optical microscopy, and electron probe microanalysis. All the alloys were annealed at 850 °C and mirror-polished to observe their reflectance curves in the visible spectrum and three-dimensional color coordinates. All the alloys were composed of a major phase of Ag–Au-rich matrix and a minor and almost colorless Pt–Cu-rich phase. It was found that the color of the alloys was substantially controlled by the Ag–Au-rich matrix and that with increasing Au/Ag atomic ratio from 0.130 to 0.996, the yellow-blue chromaticity index b ^* increased from 8.0 to 14.4, giving a pale yellow color. This systematic increase in yellowness was caused by a continuous shift of the absorption edge of reflectance curve toward longer wavelengths with increasing Au/Ag atomic ratio.     

Ethanol-tolerant Saccharomyces cerevisiae strains isolated under selective conditions by over-expression of a proofreading-deficient DNA polymerase δ

Ethanol damages the cell membrane and functional proteins, gradually reducing cell viability, and leading to cell death during fermentation which impairs effective bioethanol production by budding yeast Saccharomyces cerevisiae. To obtain more suitable strains for bioethanol production and to gain a better understanding of ethanol tolerance, ethanol-tolerant mutants were isolated using the novel mutagenesis technique based on the disparity theory of evolution. According to this theory evolution can be accelerated by affecting the lagging-strand synthesis in which DNA polymerase δ is involved. Expression of the pol3-01 gene, a proofreading-deficient of DNA polymerase δ, in S. cerevisiae W303-1A grown under conditions of increasing ethanol concentration resulted in three ethanol-tolerant mutants (YFY1, YFY2 and YFY3), which could grow in medium containing 13% ethanol. Ethanol productivity also increased in YFY strains compared to the wild-type strain in medium containing 25% glucose. Cell morphology of YFY strain cells was normal even in the presence of 8% ethanol, whereas W303-1A cells were expanded by a big vacuole. Furthermore, two of these mutants were also resistant to high-temperature, Calcofluor white and NaCl. Expression levels of TPS1 and TSL1, which are responsible for trehalose biosynthesis, were higher in YFY strains relative to W303-1A, resulting in high levels of intracellular trehalose in YFY strains. This contributed to the multiple-stress tolerance that makes YFY strains suitable for the production of bioethanol.