Apatite as an interesting seed to remove phosphorus from wastewater in constructed wetlands.

Intensive use of phosphates has resulted in high P levels in surface waters and therefore eutrophication problems. Over the last decade many studies have revealed the advantage of using specific materials with efficient phosphorus retention capacities. Recent studies state that Ca materials are of particular interest for long-term retention of P, but can induce negative effects. To improve P retention and avoid negative counter-effects we tested the potential of natural apatites. Apatite sorption was evaluated using batch and open reactor experiments. Batch experiments identify sorption mechanisms and the influence of the ionic characteristics of the solution; open reactor experiments evaluate sorption capacities in relation to the ionic composition of the solution and biomass development. In parallel, observation of the material by electron microscopy was used to give more precision information about the mechanisms involved. This work reveals the strong chemical affinity between apatites and phosphorus. Compared to other calcareous materials apatite is better able to maintain low outlet P levels. After more than 550 days feeding, sorption was still present and low P outlet levels were still being obtained when sufficient contact time and calcium content in the solution were ensured. This work demonstrates the advantages of using apatites for phosphorus removal in constructed wetlands. The behaviour of apatite in phosphorus retention is explained and its suitability for use in such extensive systems defined.     

Karyotype description of Pomacea patula catemacensis (Caenogastropoda, Ampullariidae), with an assessment of the taxonomic status of Pomacea patula.

Mitotic chromosomes of the freshwater snail Pomacea patula catemacensis (Baker 1922) were analyzed on gill tissue of specimens from the type locality (Lake Catemaco, Mexico). The diploid number of chromosomes is 2n = 26, including nine metacentric and four submetacentric pairs; therefore, the fundamental number is FN = 52, No sex chromosomes could be identified. The same chromosome number and morphology were already reported for P. flagellata, i.e., the other species of the genus living in Mexico. The basic haploid number for family Ampullariidae was reported to be n = 14 in the literature; so, its reduction to n = 13 is probably an apomorphy of the Mexican Pomacea snails. Lanistes bolteni, from Egypt, also shows n = 13, but its karyotype is much more asymmetrical, and seems to have evolved independently from P. flagellata and P. patula catemacensis. The nominotypical subspecies, P. patula patula (Reeve 1856), is a poorly known taxon, whose original locality is unknown. A taxonomical account is presented here, and a Mexican origin postulated as the most parsimonious hypothesis.     

Exponential Stability of Interval Dynamical Systems with Quadratic Nonlinearity

This article proposes an approach for investigating the exponential stability of a nonlinear interval dynamical system with the nonlinearity of a quadratic type on the basis of the Lyapunov’s direct method. It also constructs an inner estimate of the attraction domain to the origin for the system under consideration.     

Preliminary irradiation test results from the Yankee Atomic Electric Company reactor vessel test irradiation program

The Yankee Atomic Electric Company test irradiation program was implemented to characterize the irradiation response of representative Yankee Rowe reactor vessel beltline plate materials and to remove uncertainties in the analysis of existing irradiation data on the Yankee Rowe reactor vessel steel. Plate materials each containing 0·24 w/o copper, but different nickel contents at 0·63 w/o and 0·19 w/o, were heat treated to simulate the Yankee vessel heat treatment (austenitized at 982°C (1800°F)) and to simulate Regulatory Guide 1·99 database materials (austenitized at 871°C (1600°F)). These heat treatments produced different microstructures so the effect of microstructure on irradiation damage sensitivity could be tested. Because the nickel content of the test plates varied and the copper level was constant, the effect of nickel on irradiation embrittlement was also tested. Correlation monitor material, HSST-02, was included in the program to benchmark the Ford Nuclear Reactor (University of Michigan Test Reactor) which had never been used before for this type of irradiation program. Materials taken from plate surface locations (versus 1/4T) were included to test whether or not the improved toughness properties of the plate surface layer, resulting from the rapid quench, are maintained after irradiation. If the improved properties are maintained, pressurized thermal shock calculations could utilize this margin. Finally, for one experiment, irradiations were conducted at two irradiation temperatures (260°C and 288°C) to determine the effect of irradiation temperature on embrittlement. The preliminary results of the irradiation program show an average temperature effect of 38°C for a 28°C difference in irradiation temperature. The results suggest that for nickel bearing steels, the superior toughness of plate surface material is maintained after irradiation and for the copper content tested, nickel has little effect on irradiation response. No apparent microstructure effect on irradiation response was noted and the HSST-02 material's response to irradiation was similar to results from power reactor and other test reactor tests, thus qualifying the Ford Test Reactor for irradiation experiments such as those conducted for the Yankee Atomic program.     

In situ13C NMR study of tert-butanol interaction with moderately concentrated sulfuric acid

An in situ NMR study of tert-butanol dehydration in 95 and 85% sulfuric acid did not indicate the formation of tert-butyl cations as active reaction intermediates. Instead, only NMR lines from oxonium ions under the condition of fast exchange with water and the acid were observed. It is most likely that, in the concentrated acid, the active intermediates of this reaction are represented by tert-butyl sulfuric ester which probably is a precursor of invisible tert-butyl carbenium ions representing short-lived excited or transition states.