Influence of chitosan characteristics on coagulation and flocculation of organic suspensions

Several samples of chitosan with different degrees of deacetylation and of different molecular weights were tested for the coagulation–flocculation of organic suspensions. Organic suspensions were prepared by mixing mushroom powder with tap water. Experiments were carried out at pH 5, pH 7, and pH 9. Because decreasing the pH reduced the amount of chitosan required to reach the required turbidity, at pH 9, a high concentration of chitosan was required to achieve the required treatment levels, whereas the difference was less significant between pH 7 and pH 5 (the required concentration of chitosan was halved). Though viscosity, correlated to the molecular weight of chitosan, affected treatment performance, its influence on the efficiency of coagulation–flocculation could be substantially reduced by slightly increasing the concentration of the polymer. This is of importance in the processing of industrial effluents: the aging of a chitosan solution, which may cause partial depolymerization, and loss of viscosity, will have a limited impact on process efficiency. The degree of deacetylation also has a limited effect on treatment performance, especially when the degree of deacetylation exceeds 90%. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2070–2079, 2005     

Alcohol-induced changes of {beta}-lactoglobulin - retinol-binding stoichiometry

It has been demonstrated using CD that ethanol induces importantsecondary structure changes of ß-lactoglobulin. CDspectra indicate that ß-lactoglobulin secondary structure,which is mainly composed of ß-strands, becomes mostly-helical under the influence of the solvent polarity changes.The midpoint of ß-strand/-helix transition in ß-lactoglobulinis observed at dielectric constant {small tilde}60 (35% ethanol;v/v). According to CD measurements, the ethanol-dependent secondarystructure changes are reversible. The alkylation of lysines-NH₂ in ß-lactoglobulin weakens the central ß-barrelstructure, since the ß-strand/-helix transition midpointof alkylated ß-lactoglobulin is shifted to lower ethanolconcentration (25% ethanol; v/v). ß-Lactoglobulinstructural changes are triggering the dissociation of the ß-lactoglobulin- retinol complex as judged from complete quenching of its fluorescencein ethanol concentration >30% (v/v). However, in 20% ethanol(v/v), ß-lactoglobulin still retains most of its nativesecondary structure as shown by CD and, in this condition, oneß-lactoglobulin molecule binds an additional secondretinol molecule. This suggests that the highly populated speciesobserved around 20% ethanol (v/v) might represent an intermediatestate able to bind two molecules of retinol.     

Synthesis, characterization, and catalytic properties of polysiloxanes with pendant 4-(3-pyridinyl)butyl and 4-(1-oxypyridin-3-yl)butyl groups

New silane monomers with the pendant 4-(3-pyridine)butyl group have been synthesized by hydrosilation of 3-(3-butenyl)pyridine with Me _n Si(OEt)_3-n H (n=0, 1) using a platinum catalyst. Only -addition products were observed. The products were characterized by elemental analysis, infrared,¹H- and¹³C-NMR spectroscopy, and gas chromatography-mass spectrometry. Hydrolysis-polycondensation of the difunctional monomer with a basic catalyst, Me₄NOH, gave a mixture of cyclic oligomers, principally cyclic tetramer, and linear homopolymer. Under similar reaction conditions, the trifunctional monomer gave crosslinked material which was soluble in common organic solvents. The linear homopolymer and crosslinked polymer were trimethylsilyl end-blocked with hexamethyldisilazane. The cyclic and end-blocked polymers were characterized by elemental analysis and spectroscopic methods. Molecular weights of the polymers were obtained by end-group analysis using¹H-NMR spectral data, size exclusion chromatography, and direct insertion-probe mass spectrometry. The cyclic, linear, and crosslinked materials were N-oxidized withm-chloroperoxybenzoic acid and characterized by spectroscopic methods. The polymeric N-oxide derivatives were shown to be effective transacylation catalysts in the synthesis of mixed carboxylic acid anhydrides in immiscible solvents (H₂O/CH₂Cl₂) under phase-transfer conditions. The implications of the results on the mechanism of catalysis are discussed.     

Retrograde Densification of Calcined and Glass Precursors of Approximate (Bi,Pb)2Sr2Ca2Cu3O10 Stoichiometry

Retrograde densification of pelletized calcines and glasses having an approximate (Bi,Pb)₂Sr₂Ca₂Cu₃O₁₀ starting stoichiometry and sintered at ∼850°C can be described by first-order rate equations. Retrograde densification in the calcine precursors was largely due to the development of open pores, and was approximately proportional to the concentration of the (Bi,Pb)₂Sr₂CaCu₃O₁₀ phase. In the glasses, retrograde densification is mainly caused by porosity accompanying the growth of a needlelike Sr─Ca─Cu─O phase, together with (Bi,Pb)₂Sr₂Ca₂Cu₃O₁₀ and (Bi,Pb)₂Sr₂CaCu₂O₈.     

Response to walnut olfactory and visual cues by the parasitic wasp Diachasmimorpha juglandis

Diachasmimorpha juglandis is a specialist parasitoid attacking fly larvae in the genus Rhagoletis that feed exclusively on walnut fruit husks. In a free-foraging assay comparing response to uninfested, infested, and mechanically damaged fruits, we first determined that D. juglandis use host feeding damage on the fruit as a cue for host presence. In another free-foraging assay that used artificial walnut models and wind tunnel experiments, D. juglandis distinguished infested from uninfested fruits by using either olfactory or visual cues separately. However, the response rate of wasps in the wind tunnel was raised considerably when visual cues were also available. We analyzed the volatile compounds emitted by cohorts of uninfested, mechanically damaged, and infested fruits 1, 3, 5, 8, and 10 days after oviposition by flies into the infested fruits. Total volatile emissions did not differ significantly among treatments, but quantitative changes in volatiles distinguished infested fruits from uninfested and damaged fruits. The fact that parasitoids did not distinguish between infested and damaged fruits in assays where damage was visible indicates that they rely on visual cues when those are available.     

Phase Regions and Kinetics of Formation of (Bi,Pb)2Sr2Ca2Cu3Ox in Ag-Sheathed Tape

Ag-sheathed (Bi,Pb)₂Sr₂Ca₂Cu₃O, (2223) tapes were made by the oxide-powder-in-tube method. Tapes were heat-treated isothermally at several different temperatures in 7.5% O₂/Ar, then quenched into oil to retain the phase assemblages at the reaction temperatures. 2223 formed between ∼810° and ∼837°C. The Avrami equation was applied to describe the kinetics of 2223 formation from a mixture of Bi₂Sr₂CaCu₂O _x and nonsuperconducting phases, mainly Ca₂PbO₄ and CuO. The calculated Avrami exponent, n ∼ 1, indicated that the kinetics in this system could be described as a diffusion-controlled, two-dimensional nucleation and growth process. The apparent activation energy for forming 2223 was ∼2900 kJ/mol from ∼817° to ∼825°C and ∼890 kj/mol from ∼825° to ∼837°C. A temperature-time-transformation diagram was constructed based on the kinetic data; it describes the transformational behavior of this particular system.     

Penetration and pressure drop of a HEPA filter during loading with submicron liquid particles

Experiments and a model have been made of the effects of mass loading of a HEPA fiber filter during filtration of submicron liquid aerosol particles. The measurements reveal that penetration of the test medium increased during clogging by a liquid aerosol, irrespective of particle size within the chosen range (0.02–0.5 μm). The physicochemical properties of the test aerosol did not seem to affect this phenomenon. Application of a non-stationary filtration model by Payet [1991, Thèse, Université Paris, 150 p] (based on the correlation of Liu and Rubow [1990, 5th World Filt. Congress, Nice 3, 112] showed that the increase in penetration can be explained in part by an increase in interstitial velocity and in part by a decrease in the number of fibers available for capture of particles.     

The Effects of Power Law Fluid Rheology on Coil Heat Transfer for Agitated Vessel in the Transitional Flow Regime

A CFD model of heat transfer from power‐law fluids to helical cooling coils in the transitional flow regime of a baffled tank mixed with a pitched blade turbine was developed with Fluent^TM. The model captured local temperature and velocity gradients. Simulations were run, varying Re, Pr, K and n. The results indicate that a Sieder‐Tate type correlation, with the exponent on and the coefficient in front of the Reynolds number being a function of n, is recommended for estimating ho. Also, a new two coil bank design was found to be more efficient when 450 < Re < 650.     

A scalable solution to the nearest neighbor search problem through local-search methods on neighbor graphs

Pattern Analysis and Applications - Nearest neighbor search is a powerful abstraction for data access; however, data indexing is troublesome even for approximate indexes. For intrinsically...     

Flocking of Multi-agent Systems with Unknown Nonlinear Dynamics and Heterogeneous Virtual Leader

This paper investigates the flocking control of multi-agent systems with unknown nonlinear dynamics while the virtual leader information is heterogeneous. The uncertain nonlinearity in the virtual leader information is considered, and the weaker constraint on the velocity information measurements is assumed. In addition, a bounded assumption on the unknown nonlinear dynamics is also considered. It is weaker than the Lipschitz condition adopted in the most flocking control methods. To avoid fragmentation, we construct a new potential function based on the penalty idea when the initial network is disconnected. A dynamical control law including a adjust parameter is designed to achieve the stable flocking. It is proven that the velocities of all agents approach to consensus and no collision happens between the mobile agents. Finally, several simulations verify the effectiveness of the new design, and indicate that the proposed method has high convergence and the broader applicability in practical applications with more stringent restrictions.