Effects of Electrospinning Parameters on Gelatin/Poly(ϵ‐Caprolactone) Nanofiber Diameter

An electrospinning procedure was carried out to fabricate gelatin/poly(?‐caprolactone) (Gt/PCL) nanofibers. Response surface methodology based on a three‐level, four‐variable Box‐Behnken design technique was used to model the resultant diameter of the as‐spun nanofibers. A second‐order model was obtained to describe the relationship between the fiber diameter and the electrospinning parameters, namely Gt concentration, PCL concentration, content of acetic acid in the overall solvent, and content of Gt solution in the blend solution. The individual and the interactive effects of these parameters on the fiber diameter were determined. Validation experiments verified the accuracy of the model which provided a simple and effective method for fabricating nanofibers with a controllable and predictable fiber diameter.     

Excitation energy-dependent nature of Raman scattering spectrum in GaInNAs/GaAs quantum well structures

The excitation energy-dependent nature of Raman scattering spectrum, vibration, electronic or both, has been studied using different excitation sources on as-grown and annealed n- and p-type modulation-doped Ga_1 − xIn_xN_yAs_1 − y/GaAs quantum well structures. The samples were grown by molecular beam technique with different N concentrations (y = 0%, 0.9%, 1.2%, 1.7%) at the same In concentration of 32%. Micro-Raman measurements have been carried out using 532 and 758 nm lines of diode lasers, and the 1064 nm line of the Nd-YAG laser has been used for Fourier transform-Raman scattering measurements. Raman scattering measurements with different excitation sources have revealed that the excitation energy is the decisive mechanism on the nature of the Raman scattering spectrum. When the excitation energy is close to the electronic band gap energy of any constituent semiconductor materials in the sample, electronic transition dominates the spectrum, leading to a very broad peak. In the condition that the excitation energy is much higher than the band gap energy, only vibrational modes contribute to the Raman scattering spectrum of the samples. Line shapes of the Raman scattering spectrum with the 785 and 1064 nm lines of lasers have been observed to be very broad peaks, whose absolute peak energy values are in good agreement with the ones obtained from photoluminescence measurements. On the other hand, Raman scattering spectrum with the 532 nm line has exhibited only vibrational modes. As a complementary tool of Raman scattering measurements with the excitation source of 532 nm, which shows weak vibrational transitions, attenuated total reflectance infrared spectroscopy has been also carried out. The results exhibited that the nature of the Raman scattering spectrum is strongly excitation energy-dependent, and with suitable excitation energy, electronic and/or vibrational transitions can be investigated.     

Effects of annealing on the structural and magnetic properties of flame spray pyrolyzed MnFe2O4 nanoparticles

In this study, manganese ferrite (MnFe₂O₄) nanoparticles were produced through flame spray pyrolysis (FSP). To investigate the effects of heat treatment, the nanoparticles were annealed between 400 and 650°C for 4 h in air in a comparative manner. The structural, chemical, morphological, and magnetic properties of the nanoparticles were evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), dynamic light scattering (DLS), and vibrating sample magnetometry (VSM), respectively. The XRD results showed that the nanoparticles synthesized by the FSP method exhibited the MnFe₂O₄ spinel ferrite structure. The annealing process led to the decomposition of MnFe₂O₄ into various phases. According to the morphological analysis, the as-synthesized particles were hemispherical–cubic in shape and had an average particle size of less than 100 nm. In addition, the chemical bond structures of the nanoparticles were confirmed in detail by XPS elemental analysis. The highest saturation magnetization was recorded as 33.50 emu/g for the as-produced nanoparticles. The saturation magnetization of the nanoparticles decreased with increasing annealing temperature, while coercivity increased.     

水,乙醇和丁二酸二甲酯三元体系的液体平衡

Liquid-liquid equilibrium (LLE) data for the ternary system water-ethanol-dimethyl succinate have been determined experimentally at temperatures ranging from 298.15 to 318.15 K at 5 K intervals. Complete phase diagrams were obtained by determining solubility and the tie-line data. Tie-line compositions were correlated by Othmer-Tobias method. The universal quasichemical functional group activity coefficient (UNIFAC) and modifiedUNIFAC methods were used to predict the phase equilibrium in the system using the interaction parameters determined from experimental data between groups CH3, CH2, OH, CH3COO and H20. It is found that UNIFAC and modified UNIFAC group interaction parameters used for LLE could not provide a good prediction. Distribution coefficients and separation f~ctors were evaluated for the immiscibility region.     

Viscoelastic and Processing Effects on the Fiber-Matrix Interphase Strength. Part I. The Effects of Loading Rate, Test Temperature, Fiber Sizing and Global Strain Level

The effects of loading rate, fiber sizing, test temperature and global strain level on the adhesion strength between carbon fibers and a thermosetting epoxy (Epon 815) are studied using the single fiber fragmentation test procedure. Analytical methodology describing the viscoelastic behavior observed is also presented. The possibility of rate-temperature-interphase thickness superposition for the interfacial strength function is illustrated based on the analytical models discussed. Experimental data are discussed using Weibull statistics and also presented in the form of percent relative frequency histograms for the fiber fragments in a collective fashion. The use of histograms allows for interpretation of the skewness in the data population.     

Experimental and MD simulation study on the physical and mechanical properties of organically modified montmorillonite clay and compatibilized linear low density polyethylene nanocomposites

Understanding the interfacial interactions plays a key role in controlling mechanical and physical properties of polymer/clay nanocomposites (PCNs). In this work, the surface interactions between constituents of experimentally prepared PCNs which are the pristine linear low density polyethylene (PE) chains, PE compatibilizers, montmorillonite clay surface layer, and surfactants were studied quantitatively by employing molecular dynamics simulation technique. The interaction energy between the polymer and the clay was found to be inversely proportional with the volume of the surfactant which decreases the electrostatic interactions between the compatibilizer and the hydrophilic clay surface. However, the van der Waals (vdW) interactions between alkyl tails of surfactants and the PE chains increase with the tail length of the surfactants. The most attractive interaction was between the surfactant's head group and the clay surface. We showed that there existed fine balance between the electrostatic and vdW type forces on the stability and the enhanced properties of the PE–organoclay nanocomposites. Calculated interaction energies were then correlated to the experimentally measured mechanical properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45817.     

The adsorption behavior of cesium on poly(N-isopropylacrylamide/itaconic acid) copolymeric hydrogels

In this study, N-isopropylacrylamide/itaconic acid (NIPAAm/IA) hydrogels prepared by irradiating with γ radiation were used in experiments on cesium ion adsorption. The cesium ion adsorption capacity of the hydrogels was investigated as a function of Cs⁺ concentration, pH and temperature. The adsorption behavior of cesium was evaluated by using the radiotracer method. The adsorption isotherm models were applied to the experimental data, and it was seen that Freundlich isotherm explained the adsorption better than Langmuir isotherm. Two simplified kinetic models including pseudo-first-order and pseudo-second-order equation were selected to follow the adsorption processes. The Cs⁺ adsorption could be best described by the pseudo-first-order equation. The thermodynamic parameters including ΔG°, ΔH° and ΔS° for adsorption processes of Cs⁺ on the hydrogel were also calculated, and the negative ΔH° and ΔG° confirmed that the adsorption process was exothermic and spontaneous.     

Viscoelastic and Processing Effects on the Fiber-Matrix Interphase Strength. Part I. The Effects of Loading Rate,Test Temperature,Fiber Sizing and Global Strain Level

The effects of loading rate, fiber sizing, test temperature and global strain level on the adhesion strength between carbon fibers and a thermosetting epoxy (Epon 815) are studied using the single fiber fragmentation test procedure. Analytical methodology describing the viscoelastic behavior observed is also presented. The possibility of rate-temperature-interphase thickness superposition for the interfacial strength function is illustrated based on the analytical models discussed. Experimental data are discussed using Weibull statistics and also presented in the form of percent relative frequency histograms for the fiber fragments in a collective fashion. The use of histograms allows for interpretation of the skewness in the data population.     

Viscoelastic and Processing Effects on the Fiber-Matrix Interphase Strength. Part III. The Effects of Postcure

A novel method for tailoring the interphase of carbon fiber-polymer composites by resistive electric heating is presented. The single-fiber fragmentation test is used to investigate the adhesion and fracture properties of the interphase. Electric resistive heating is shown to increase adhesion and toughness at the interphase region. In analyzing the results, the strength and fracture energy of the interphase are related to the thermal postcure conditions created by resistive electric heating. For this purpose, a difference analysis method is used to obtain a numerical solution for the heat conduction problem in the single-fiber test specimen and the temperature distributions are determined. Improvements obtained by using resistive electric heating of the carbon fiber are compared with those obtained by postcuring of the whole sample via convective thermal postcuring. The results obtained using these two different postcure methods seem to be similar.     

Polystyrene Suspension Polymerization: The Effect of Polymerization Parameters on Particle Size and Distribution

Effects of polymerization parameters are studied to better understand interactions between parameters in stirred-tank polymerization reactors and to derive a regression model correlating polymer particle size and particle-size distribution with agitator speed, agitator diameter, tricalcium phosphate, dodecyl benzene sodium sulfonate concentrations, and mass cycle period. The derived equations give way to prediction of the polymerization conditions in order to obtain desired particle size and particle-size distributions which covers particle sizes between 0.3 and 5 mm. The roles of some other parameters and limiting agitation parameters are also investigated.