Design of high-speed data transfer turbo code for body channel communication transceivers

In this work, a digital differential transmitter based on low-power wireless compensation transceiver for body channel communication (BCC) is proposed. Further, the proposed transceiver is composed of Touch Status Detection Unit (TSDU), Wireless Status Compensation Unit (WSCU), and a reconfigurable preamplifier. Initially, the human body channel environment for wireless communication is investigated based on properties from 1 to 100 MHz. Further, the turbo code-based encoding scheme is used to encode the data before transferring the data on the transmitter side. Also, the proposed error-correcting parallel turbo decoder using a modified step-by-step algorithm is presented. The turbo code-based decoding scheme is used to recover the error-free transmitted data at the receiver side. Results demonstrate that the proposed BCC transceiver is designed using 90 nm CMOS technology and it is observed that the proposed BCC transceiver has utilized an area of 600mm². Also, the maximum data rate achieved by a proposed BCC transceiver was 100 Mbps, and the overall transceiver power consumption is 0.42 mW, and energy for communication is 0.02 nj/b.     

A post quantum secure construction of an authentication protocol for satellite communication

Satellite's communication system is used to communicate under significant distance and circumstances where the other communication systems are not comfortable. Since all the data are exchanged over a public channel, so the security of the data is an essential component for the communicating parties. Both key exchange and authentication are two cryptographic tools to establish a secure communication between two parties. Currently, various kinds of authentication protocols are available to establish a secure network, but all of them depend on number–theoretical (discrete logarithm problem/factorization assumption) hard assumptions. Due to Shor's and Grover's computing algorithm number theoretic assumptions are breakable by quantum computers. Although Kumar and Garg have proposed a quantum attack-resistant protocol for satellite communication, it cannot resist stolen smart card attack. We have analyzed that how Kumar and Garg is vulnerable to the stolen smart card attack using differential power analysis attack described in He et al and Chen and Chen. We have also analyzed the modified version of signal leakage attack and sometimes called improved signal leakage attack on Kumar and Garg's protocol. We have tried to construct a secure and efficient authentication protocol for satellites communication that is secure against quantum computing. This is more efficient as it requires only three messages of exchange. This paper includes security proof and performance of the proposed authentication and key agreement protocol.     

Adaptive simulation for system reliability analysis of large structures

This article proposes an efficient simulation-based methodology to estimate the system reliability of large structures. The proposed method uses a hybrid approach: first, a probabilistic enumeration technique is used to identify a significant system failure sequence. This provides an initial sampling domain for an adaptive importance sampling procedure. As further simulations are performed, information about other significant sequences is incorporated to refine the sampling domain and to estimate the failure probability of the system. The adaptive sampling overcomes the restrictive assumptions of analytical techniques, yet achieves the robustness and accuracy of basic Monte Carlo simulation in an efficient manner. In this article, the proposed method is implemented using the ANSYS finite element software, and is applied to the system reliability estimation of two redundant structural systems, a six-story building frame and a transmission tower. Both ductile and brittle failure modes are considered. The method is structured in a modular form such that it can be easily applied to different types of problems and commercial software, thus facilitating practical application.     

An Indo-Soviet experiment on anmhd generator test section at the Soviet U-02 facility

This paper summarizes the major results of the joint Indo-Soviet experiment for testing the Indianmhd generator channel section, designed and fabricated at the Bhabha Atomic Research Centre, Bombay, which was carried out at the U-02 facility in Moscow, USSR, in May 1980. The total test duration was 65 hours and included electrophysical tests and life tests under applied electric fields. The main purpose of the tests was to substantiate the physical concepts, computer codes, design features and special processing techniques involved in the development ofmhd generators for the Indian pilot plant at Tiruchirapalli. The experimental observations on the phenomena of heat transfer to the walls, gas dynamics in the channel, electrical characteristics of the generator and near-electrode processes including the analysis of arc spots correlate with the theoretical estimates based on present understanding of the physical processes occuring in similarmhd generators. The post-operational inspection of the channel section and extensive investigation of materials through microscopic analysis, chemical analysis and x-ray analysis are also reported in this paper. The joint test programme has clearly demonstrated the definite operating capability of the test section and has given sufficient information and encouragement for building better and improved channels for the future.     

Validation of models with multivariate output

This paper develops metrics for validating computational models with experimental data, considering uncertainties in both. A computational model may generate multiple response quantities and the validation experiment might yield corresponding measured values. Alternatively, a single response quantity may be predicted and observed at different spatial and temporal points. Model validation in such cases involves comparison of multiple correlated quantities. Multiple univariate comparisons may give conflicting inferences. Therefore, aggregate validation metrics are developed in this paper. Both classical and Bayesian hypothesis testing are investigated for this purpose, using multivariate analysis. Since, commonly used statistical significance tests are based on normality assumptions, appropriate transformations are investigated in the case of non-normal data. The methodology is implemented to validate an empirical model for energy dissipation in lap joints under dynamic loading.     

Understanding sources of user variability in computer-based data entry performance

The pervasive use of computers in work settings implies that an increased number of workers, with varying levels of skills and abilities, will be performing computerbased tasks. This study investigated the impact of age, cognitive abilities, and computer experience on the performance of a real world data entry task. One hundred and ten subjects, ranging in age from 20 - 75 years, performed the task for nine hours following task training. The results indicated that abilities such as visuo-spatial skills, motor skills and processing speed had a significant impact on performance as did age and prior computer experience. With respect to age, the older participants completed less work than the younger and middle-aged subjects. Age differences in psychomotor skills and processing speed appeared to be important factors underlying age effects. In fact, the data indicated that after controlling for differences in these abilities age was no longer a significant predictor of work output. Further, after controlling for differences in work output the older people made fewer errors than the younger people. Overall the data suggest that older people will be at a disadvantage in the performance of computer-based data entry work to the extent to which speed of responding is emphasized. However, if speed of responding is not a critical element of performance they will be able to achieve comparable levels of performance to that of younger people.     

Fabrication of corrosion resistant, bioactive and antibacterial silver substituted hydroxyapatite/titania composite coating on Cp Ti

The present work is aimed at developing a bioactive, corrosion resistant and anti bacterial nanostructured silver substituted hydroxyapatite/titania (AgHA/TiO₂) composite coating in a single step on commercially pure titanium (Cp Ti) by plasma electrolytic processing (PEP) technique. For this purpose 2.5 wt% silver substituted hydroxyapatite (AgHA) nanoparticles were prepared by microwave processing technique and were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy and transmission electron microscopy (TEM) methods. The as-synthesized AgHA particles with particle length ranging from 60 to 70 nm and width ranging from 15 to 20 nm were used for the subsequent development of coating on Cp Ti. The PEP treated Cp Ti showed both titania and AgHA in its coating and exhibited an improved corrosion resistance in 7.4 pH simulated body fluid (SBF) and 4.5 pH osteoclast bioresorbable conditions compared to untreated Cp Ti. The in vitro bioactivity test conducted under Kokubo SBF conditions indicated an enhanced apatite forming ability of PEP treated Cp Ti surface compared to that of the untreated Cp Ti. The Kirby-Bauer disc diffusion method or antibiotic sensitivity test conducted with the test organisms of Escherichia coli (E. coli) for 24 h showed a significant zone of inhibition for PEP treated Cp Ti compared to untreated Cp Ti.     

Some Thermodynamic Aspects of the Oxides of Chromium

To understand Cr emissions from slag melts to a vapor phase, an assessment of the stabilities of the chromium oxides at high temperatures has been carried out. The objective of the present study is to present a set of consistent data corresponding to the thermodynamic properties of the oxides of chromium, with special reference to the emission of hexavalent chromium from slags. In the current work, critical analysis of the experimental data available and a third analysis in the case of Cr₂O₃ have been carried out. Commercial databases, Fact Sage and ThermoCalc along with NIST-JANAF Thermochemical Tables, have been used for the analysis and comparisons of the results that are presented. The significant discrepancies in the available data have been pointed out. The data from NIST-JANAF Thermochemical Tables have been found to provide a set of consistent data for the various chromium oxides. An Ellingham diagram and the equations for the ΔG° (standard Gibbs free energy change) of formation of CrO _x have been proposed. The present analysis shows that CrO₃(g) is likely to be emitted from slag melts at high oxygen partial pressures.     

A clustered locally linear approach on face manifolds for pose estimation

Data points with small variations between them are assumed to lie close to each other on a smooth varying manifold in the feature space. Such data are hard to classify into separate classes . A sequence of face pose images with closely varying pose angles can be considered as such data. The pose angles when large enough create images that are largely differing from each other, and thus, the sequence of face images can be assumed to be on or near a nonlinear manifold. In this paper, we propose an unsupervised pose estimation method for face images based on clustered locally linear manifolds using discriminant analysis. We divide the data into multiple disjointed, locally linear and separable clusters. The problem of identifying which cluster to use is solved by dividing the entire process into two steps. The first step or projection using the entire smooth manifold identifies a rough region of interest. We use clustering techniques on entire data to form the pose-dependent classes which are then used to find the first set of discriminant functions. The second step or second projection uses trained cluster(s) from this neighbourhood to obtain a second set of discriminant functions. The idea behind such an approach is that the local neighbourhood would be linear and provide better between-class separation, and hence, the classification problem would now be simpler.     

A hybrid approach to computing electrostatic forces in fluidized beds of charged particles

In particulate flow devices particles acquire electric charge through triboelectric charging, and resulting electrostatic forces can alter hydrodynamics. To capture this effect, the electrostatic force acting on individual particles in the device should be computed accurately. Electrostatic force is calculated using a hybrid approach consisting of: (1) long‐range contributions from an Eulerian electric field solved using the Poisson equation (2) short‐range contributions calculated using a truncated pairwise sum and (3) a correction to avoid double counting. Euler‐Lagrange simulation of flows incorporating this hybrid approach reveals that bed height oscillations in small fluidized beds of particles with monopolar charge decreases with increasing charge level, which is related to lateral segregation of particles. A ring‐like layer of particles, reported in experimental studies, forms at modestly high charge levels. Beds with equal amounts of positively and negatively charged particles are fluidized in a manner similar to uncharged particles. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2282–2295, 2016