Protein nanopatterns and biosensors using gold binding polypeptide as a fusion partner

An efficient strategy for immobilizing proteins on a gold surface was developed by employing the gold binding polypeptide (GBP) as a fusion partner. Using the enhanced green fluorescent protein (EGFP), severe acute respiratory syndrome coronavirus (SARS-CoV) envelope protein (SCVme), and core streptavidin (cSA) of Streptomyces avidinii as model proteins, specific immobilization of the GBP-fusion proteins onto the gold nanoparticles and generation of protein nanopatterns on the bare gold surface were demonstrated. The GBP-fused SCVme bound to gold nanoparticles successfully interacted with its antibody and showed changes in absorbance and color, allowing efficient diagnosis of SARS-CoV. The fusion proteins could be successfully immobilized on the gold surface by nanopatterning and microcontact printing as examined by atomic force microscopy and surface plasmon resonance analysis. The poly(dimethylsiloxane) microfluidic channels were created on the gold surface and were used for antigen-antibody and DNA-DNA interaction studies. Specific immobilization of GBP-EGFP fusion protein and its interaction with the antibody in the microchannels could be demonstrated. By immobilizing the DNA probe through the use of GBP-fused cSA, specific hybridization of the target DNA prepared from Salmonella could also be achieved. The GBP-fusion method allows immobilization of proteins onto the gold surface without surface modification and in bioactive forms suitable for studying protein-protein, DNA-DNA, and other biomolecular interaction studies. Furthermore, these studies can be carried out in a microfluidic system, which allows high-throughput analysis of biomolecular interactions.     

Polymerization of methyl methacrylate in the presence of a nonpolar hydrocarbon solvent. I. Construction of a complete ternary phase diagram through an in situ polymerization

This article presents the ternary phase diagram for methyl methacrylate (MMA), poly(methyl methacrylate) (PMMA), and n‐hexane system at 70°C. It was constructed by both theoretical calculations and online laser light scattering (LLS) technique. In situ polymerization of MMA in a nonpolar nonsolvent carried out in a LLS cell provides a new means for the accurate detection of the cloud points of highly viscous polymer mixtures, with polymer weight fractions over 0.6. The ternary phase diagram measured in this study can be used to design the reaction conditions for the precipitation and/or dispersion polymerization in a nonpolar nonsolvent medium where polymerization kinetics as well as polymer particle morphologies are strongly affected by thermodynamic phase separation phenomena. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Short communication: lack of stage-specific embryonic antigen-1 expression by bovine embryos and primordial germ cells

The objective of this study was to determine whether stage-specific embryonic antigen-1, a cellular marker commonly used to identify murine undifferentiated embryonic cells, is also a useful marker for bovine pluripotent cells. Expression of stage-specific embryonic antigen-1 was examined by indirect immunohistochemistry on bovine preimplantation embryos and on primordial germ cells contained in the genital ridge. Expression of stage-specific embryonic antigen-1 was not observed in any of the cleavage-stage bovine embryos examined, including one-cell, two-cell, four-cell, eight-cell, morula, and blastocyst stages, nor in tissue sections of bovine genital ridges collected from embryos on d 34, 37, and 40 of gestation. As expected, expression of stage-specific embryonic antigen-1 was detected on murine preimplantation embryos and on murine teratocarcinoma cells. Results of this study indicate that, unlike in the mouse, stage-specific embryonic antigen-1 is not a useful cellular marker for pluripotent bovine embryonic cells or bovine primordial germ cells.     

Material Design for 3D Multifunctional Hydrogel Structure Preparation

Hydrogels are recognized as one of the most promising materials for e-skin devices because of their unique applicable functionalities such as flexibility, stretchability, biocompatibility, and conductivity. Beyond the excellent sensing functionalities, the e-skin devices further need to secure a target-oriented 3D structure to be applied onto various body parts having complex 3D shapes. However, most e-skin devices are still fabricated in simple 2D film-type devices, and it is an intriguing issue to fabricate complex 3D e-skin devices resembling target body parts via 3D printing. Here, a material design guideline is provided to prepare multifunctional hydrogels and their target-oriented 3D structures based on extrusion-based 3D printing. The material design parameters to realize target-oriented 3D structures via 3D printing are systematically derived from the correlation between material design of hydrogels and their gelation characteristics, rheological properties, and 3D printing processability for extrusion-based 3D printing. Based on the suggested material design window, ion conductive self-healable hydrogels are designed and successfully applied to extrusion-based 3D printing to realize various 3D shapes.     

Mutations in calpastatin and μ-calpain are associated with meat tenderness,flavor and juiciness in Hanwoo (Korean cattle): Molecular modeling of the effects of substitutions in the calpastatin/μ-calpain complex

The objective of this study was to evaluate the effects of seven single nucleotide polymorphisms (SNPs) in Calpain 1 and Calpastatin genes previously associated with meat tenderness attributes in other cattle breeds in Korean Hanwoo cattle. The Hanwoo resource population was used to study association of 7 SNPs with beef tenderness, flavor, juiciness, intramuscular fat and shear force. In this association study, CAST:c.182A > G (+ 0.14, P = 0.04) and CAST:c.1985G > C (− 0.12, P = 0.02) had significant effects on juiciness, but no effects on other traits. In contrast, CAPN1:c.1589G > A was associated with meat tenderness (P = 0.01) and juiciness (P = 0.04). The CAPN1:c.1589G > A (Val530Ile) SNP marker displayed significant effect on the meat tenderness score which is strongly supported by molecular modeling of the CAPN1:c.1589G > A (Val530Ile) variant that inhibits CAST protein from binding more strongly than the wild-type protein, which may explain its effect on meat tenderness.     

Oxidative and color stability of cooked ground pork containing lotus leaf (Nelumbo nucifera) and barley leaf (Hordeum vulgare) powder during refrigerated storage

This study aimed to evaluate the oxidative and color stability of cooked ground pork containing lotus leaf powder at 0.1 (LP1) and 0.5% (LP2) as well as barley leaf powder at 0.1 (BP1) and 0.5% (BP2) during refrigerated storage for 10 days. The oxidative stability of these powders was compared with butylhydroxytoluene (BHT). LP1 had higher a* and lower b* values than the control (-) over 4 days (p<0.05). The pH values of the ground pork samples made with addition of LP and BHT decreased until day 4 and then increased. Thiobarbituric acid-reactive substance (TBARS) values were lowest in LP2 on day 10 (p<0.05). The ground pork samples containing LP and BP had lower peroxide values (POVs) and conjugated dienes (CD) compared to the control (-).These results indicate that LP or BP can be incorporated into ground pork to effectively retard oxidation after cooking.     

Erratum to: Fe Oxides on Ag Surfaces: Structure and Reactivity

Topics in Catalysis -     

Optimization of casting conditions for heat and abrasion resistant large grey iron castings

Numerical simulation technology was applied for optimizing the casting design and conditions in large cast iron castings for marine engine. By the simulation of mold filling and solidification sequences the problems of the previous casting conditions were analyzed and marked improvements for large cylinder liner parts were derived from these results. Especially the amount and positions of chills were optimized to increase the mechanical properties and to minimize the shrinkage and microporosity in the castings. Ultrasonic testing, penetration testing and mechanical property testing were carried out for the parts with the modified casting conditions. It showed that no defects in the castings were found and the productivity could be distinctly increased. The mechanical properties satisfied also the specification demanded.     

Comparative study of Al2O3, HfO2, and HfAlOx for improved self‐compliance bipolar resistive switching

The comparison of resistive switching (RS) storage in the same device architecture is explored for atomic layer deposition (ALD) Al₂O₃, HfO₂ and HfAlO_x‐based resistive random access memory (ReRAM) devices. Among them, the deeper high‐ and low‐ resistance states, more uniform V_SET‐V_RES, persistent R_OFF/R_ON (>10²) ratio and endurance up to 10⁵ cycles during both DC and AC measurements were observed for HfAlO_x‐based device. This improved behavior is attributed to the intermixing of amorphous Al₂O₃/HfO₂ oxide layers to form amorphous thermally stable HfAlO_x thin films by consecutive‐cycled ALD. In addition, the higher oxygen content at Ti/HfAlO_x thin films interface was found within the energy dispersive spectroscopy analysis (EDS). We believe this higher oxygen content at the interface could lead to its sufficient storage and supply, leading to the stable filament reduction‐oxidation operation. Further given insight to the RS mechanism, SET/RESET power necessities and scavenging effect shed a light to the enhancement of HfAlO_x‐based ReRAM device as well.     

Control of the photorefractive effect using a low Tg sol-gel glass

Summary We prepared the photorefractive sol-gel glass based on organic-inorganic hybrid materials containing a charge transporting molecule, second-order nonlinear optical chromophore, photosensitizer, and plasticizer. Carbazole and 2-{ 4-[(2-hydroxyethyl) methylamino]benzylidene}malononitrile were reacted with 3-isocyanatopropyl triethoxysilane and the functionalized silanes were employed to fabricate the efficient photorefractive media including 2,4,7-trinitrofluorenone (TNF) to form a charge transfer complex. The simplest way to vary the composition in the matrix was to mix the desired amount of the functionalized alkoxysilane. The prepared sol-gel glass samples contained a large amount of nonlinear optical (NLO) chromophore compared to that of the charge transporting molecules. They showed a large net gain coefficient and high diffraction efficiency at certain conditions. Received:27 May 2002/Revised version:23 August 2002/Accepted:7 September 2002 Correspondence to Dong Hoon Choi E-mail: dhchoi@khu.ac.kr