Providing application-level QoS in 3G/4G wireless systems: a comprehensive framework based on multirate CDMA

The emerging applications for 3G and 4G wireless systems typically require highly heterogeneous and time-varying quality of service from the underlying protocol layers. The wireless links, however, provide only an unreliable communication channel that suffers from temporal outages. As a consequence, protocol mechanisms are needed that, based on the unreliable wireless links, provide the different service qualities required by the emerging applications. We identify the emerging IP-based applications for 3G and 4G wireless systems and categorize their QoS requirements. We discuss the wireless access mechanisms that show promise as the basis for supporting these applications. We then propose a set of protocol mechanisms that, based on the discussed wireless access mechanisms, provide the required QoS for the different application categories.     

Preliminary<Emphasis Type="Italic">in vitro</Emphasis> and<Emphasis Type="Italic">in vivo</Emphasis> characterizations of a sol-gel derived bioactive glass-ceramic system

This study investigates quantitatively and qualitatively the sol-gel derived bioactive glass-ceramic system (BGS)—apatite-wollastonite (AW) type granules in the size range of 0.5–1 mm, as an effective graft material for bone augmentation and restoration. Scanning electron micrographs (SEM) of the sintered granules revealed the rough material surface with micropores in the range 10–30 μm. X-ray diffraction (XRD) pattern of the granules revealed the presence of crystalline phases of the hydroxyapatite and wollastonite, and the functional groups of the silicate and phosphates were identified by Fourier transform infrared spectroscopy (FT-IR). Thein vitro cell culture studies with L929 mouse fibroblast cell line showed very few cells adhered on the BGS disc after 24 h. This could be due to the highly reactive surface of the disc concomitant with the crystallization but not due to the cytotoxicity of the material, since the cellular viability (MTT assay) with the material was 80‰ Cytotoxicity and cytocompatibility studies proved that the material was non-toxic and biocompatible. After 12 weeks of implantation of the BGS granules in the tibia bone of New Zealand white rabbits, the granules were found to be well osteointegrated, as observed in the radiographs. Angiogram with barium sulphate and Indian ink after 12 weeks showed the presence of microcapillaries in the vicinity of the implant site implicating high vascularity. Gross observation of the implant site did not show any inflammation or necrosis. SEM of the implanted site after 24 weeks revealed good osteointegration of the material with the newly formed bone and host bone. New bone was also observed within the material, which was degrading. Histological evaluation of the bone healing with the BGS granules in the tibial defect at all time intervals was without inflammation or fibrous tissue encapsulation. After 2 weeks the new bone was observed as a trabeculae network around the granules, and by 6 weeks the defect was completely closed with immature woven bone. By 12 weeks mature woven bone was observed, and new immature woven bone was seen within the cracks of the granules. After 24 weeks the defect was completely healed with lamellar bone and the size of the granules decreased. Histomorphometrically the area percentage of new bone formed was 67.77% after 12 weeks and 63.37% after 24 weeks. Less bone formation after 24 weeks was due to an increased implant surface area contributed by the material degradation and active bone remodeling. The osteostimulative and osteoconductive potential of the BGS granules was established by tetracycline labelling of the mineralizing areas by 2 and 6 weeks. This sol-gel derived BGS granules proved to be bioactive and resorbable which in turn encouraged active bone formation.     

Novel bipolar differential input/output current-controlled current source

A new bipolar differential input/output current-controlled current source (CCCS) is described. The basic cell consists of a translinear array of six transistors with two bipolar inputs, and is suited for the input stage of a differential current-mode operational amplifier.     

On the use of elliptical side branches to thick-walled cylinders

The boundary integral equation (boundary element) method of numerical stress analysis is used to compute stress concentration factors at the intersections between side branches and thick-walled tubes or pressure vessels. Cases of both circular and elliptical side branch cross sections are considered, the effect of the latter being to significantly reduce the maximum stresses generated under internal pressure. For the typical geometries considered, reductions of more than 20% are obtained at optimum ellipse aspect ratios of about 0·8.     

Tg/Tm for unsubstituted polymers

Polymers under discussion can be represented by [CH₂)_nR]_p where R is CH₂, CF₂, O, S or CH = CH; and where n can vary from 0 to ∞. The copolymer, P(ethylene-alt-TFE) is also included. These polymers tend to be highly crystalline with resultant confusion about their Tg and hence their Tg/Tm values and a clarification scheme is proposed in which it is considered that each such polymer has a double glass transition, Tg(L)/f(χ_c), Tg(U) = F(χc); and a sub-glass T<Tg(L) at 0.75 Tg(L), where F(χc) signifies a function of fractional crystallinity, χ_c. T<Tg(L) and Tg(L) increase linearly with Tm. The ratio, Tg(L)/Tm, is therefore, not a constant but is close to 0.5. T<Tg(L)/Tg(L) is also not a constant but is close to 0.75. Tg(U) lies within a wedge whose top and bottom sides increase with Tm. The premelting, intracrystalline transition temperature, Tα_c, is also a linear function of Tm. It is suggested that the scheme outlined above should help to resolve uncertainties in assigning transition temperatures for unsubstituted polymers. The low Tg/Tm values for these polymers is discussed in terms of their small da/dc ratios and small crosssectional areas per chain.     

Hydrogenation of canola oil in the presence of nickel and the methyl benzoate-chrome carbonyl complex

Canola oil was hydrogenated using a mixture of homogeneous methyl benzoate-Cr(CO)₃ and heterogeneous nickel catalysts. The effect of the methyl benzoate-Cr(CO)₃_to-nickel ratio on the activity, specific isomerization index, linoleate and linolenate selectivities, and fatty acid composition was evaluated, and the results compared with those obtained with commercial nickel catalyst and methyl benzoate-Cr(CO)₃ used individually. At higher chromium-to-nickel ratios the activity of nickel was inhibited and the system behaved essentially like the pure chrome complex, while at low chromium-to-nickel ratios the characteristics of the nickel predominated. In a short transition zone relatively high reaction rates were obtained with significantly reducedtrans-isomer levels in the product. In a broader sense, it may be possible to combine a homogeneous and heterogeneous catalyst while retaining the advantages of both. We may thus be able to design catalyst systems for specific applications.     

Colloidal silica removal in coagulation processes for wastewater reuse in a high-tech industrial park.

Four experiments of coagulation and flocculation were conducted to investigate the characteristics of colloidal silica removal in a high-tech industrial wastewater treatment plant for reclamation and reuse of the effluent. Experimental results illustrated that poly-aluminium chloride (PACl) showed higher performances on colloidal silica removal than alum. Interestingly, the two coagulants demonstrated the same capacity on silica removal. The specific silica removal capacity was approximately 0.135 mg SiO2/mg Al2O3 when the dosage of coagulants was in the range 30-150 mg/L Al2O3. In addition, the silica was reduced significantly at the condition of pH above 8. Experimental data implied that precipitation of aluminium flocs was the major mechanism for colloid silica removal in PACl and alum coagulation, besides, charge adsorption was also important for improving removal efficiency. Moreover, the addition of polyacrylic acid (PAA) as a flocculant could slightly advance silica removal in the PACl coagulation. The combined PACl/PAA/flocs coagulation was effective for the removal of colloidal silica, soluble COD, and turbidity and also suitable as a pretreatment unit in wastewater reclamation and reuse processes.     

The research seminar on computer algebra in 2005–2006

An annual report on meetings of the scientific research seminar on computer algebra is presented.