Full scale fire tests for ship accommodation quarters

Ten full-scale test fires were conducted in a chamber simulating a three person ship accommodation quarter. The test fires used three different ventilation conditions, two types of bunks and furnishings with either polyurethane foam or chloroprene foam. The chamber was instrumented to follow the development of the fire.The furnishings with polyurethane foam were readily ignited and produced an intense fire within 2 to 4 minutes. The furnishings with chloroprene foam ignited but burned slowly with a small flame or in smoldering combustion.The ventilation conditions had a significant effect on the development and intensity of the fire as the test fires were burning under oxygen-limiting conditions.The solid pan bunks retarded the early development of the fire compared to open bunks for polyurethane furnishings. However, once the mattresses on the three bunks were ignited the intensity of the test fires was similar for both types of bunks.     

Observations on the changes in nitrate concentrations along streams in seven upland moorland catchments in Northeast Scotland

River water has been sampled under baseflow conditions in both summer and winter at c. 250-m intervals along the length of each of seven rivers in northeast Scotland, and the nitrate contents have been determined. The resultant data have been examined in the context of the nitrogen saturation hypothesis. Capacity of the catchment soils to retain nitrate was generally minimal in winter. Although biological uptake of nitrate was evident in summer, in the upper part of each catchment substantial nitrate leaching still occurred. The phenomenon was most marked in water draining from hill peats, except where these were conspicuously waterlogged. The results are discussed in the context of possible nitrogen saturation effects on upper catchment slopes.     

Permeability changes in granite with crack growth during immersion in hot water

Permeability tests and observation of induced, as well as inherent, cracks have been carried out to quantitatively explain permeability changes in granite taking place during a weathering test in terms of micro-structure by cracks. To this end, permeability tensors were estimated from observations of crack systems using the Replica Method and of the crack apertures with a scanning electron microscope. The following conclusions were reached: the drastic increase in permeability around an immersion of 1000 d in 90°C water could not be explained by the existence of a percolation threshold because all the specimens were percolative in the sense that the traces of crack tensor were above the critical density for percolation. On the other hand, SEM observation revealed that, with immersion, crack apertures widened and their distribution spread. Permeability estimated using the third (not the first) moment of observed apertures showed the increase in measured permeability well. When evaluating the connectivity parameter λ to give a quantitative accordance between measured and estimated permeability, it had a constant value as low as 0.17, irrespective of the immersion period, in spite of the higher density of micro-cracks than the percolation threshold. It can be said that, in considering the natural three-dimensional crack system, the third moment of physical apertures plays a more important role in predicting the permeability and λ is greatly affected by the spread of crack apertures.     

Protocatechuic acid ozonation in aqueous solutions

The oxidation of protocatechuic acid with ozone in aqueous solution has been studied varying the temperature, pH, ozone partial pressure and initial acid concentration. A stoichiometric ratio of 2 mol of ozone consumed per mol of protocatechuic acid reacted is deduced from homogeneous experiments in a discontinuous tank reactor.In the ozonation experiments, the influence of the operating variables was established and the kinetic regime of ozone absorption was shown to be fast and pseudo m-order with respect to ozone, except at pH 2, when the reaction develops in the moderate kinetic regime. After applying a mass transfer with chemical reaction model, the reaction orders are deduced and the kinetic rate constants are determined as a function of pH and temperature. A modified Arrhenius expression is proposed to correlate them.     

Treatment capability of a physical—Chemical package plant

A short-term study of a commercially-available physical—chemical waste treatment plant is reported. Results indicate that an excellent quality of effluent can be consistently obtained despite wide fluctuations of influent wastewater characteristics. Physical, chemical, and biological parameters were monitored. The short-term data obtained offer some evidence of superior treatment efficiency in terms of COD, color, turbidity, and phosphorus removals when compared to more conventional treatment methods.     

The uptake of heavy metals by epiphytic bacteria on Alisma plantago-aquatica

Bacterial epiphytes on the surface of the fresh-water plant Alisma plantago-aquatica collected from a polluted river were found to be a major factor in contributing to the total metal concentrations of the plant. The removal of epiphytes from the leaf surface resulted in significant reductions in the concentrations of Cr (reduced by 15–50%), Cu (30–35%), Fe, Pb, and Zn (10–50%). While numbers of epiphytes and concentrations of heavy metals increased in samples collected from polluted water compared with from unpolluted water, the fraction of metals held by the epiphytes appeared to remain similar for all samples.     

A box beam finite element for the elastic analysis of thin-walled structures

The purpose of this paper is to present a formulation of a curved thin-walled box beam finite element having a variable cross-section with at least one vertical axis of symmetry.

To allow for the effects of warping and distortion, three degrees of freedom have been included in the formulation. These degrees of freedom have been designated as the rate of change of twisting angle, the distortional angle of the cross-section, and the rate of change of distortional angle. The effect of shear lag has also been included.

The element may be used for the elastic analysis of a variety of thin-walled structures and in particular for the preliminary analysis of box bridge decks where a three-dimensional analysis may be unnecessary. The accuracy of the element has been demonstrated by comparison of the results obtained with known results from other methods for some examples.     

国际航空货运枢纽港:以航空物流为新竞争优势

20世纪80年代以来,经济全球化促进了亚太地区的一些国家和地区的经济迅速增长,同时也带动了区内航空货运的发展.国际航空货运枢纽港(GTP:Global TransPark)是新经济背景下的一种新型货运机场,对提升区域竞争力有着重要的意义.我国有必要建设GTP,以期在21世纪电子商贸及高科技加工工业的发展上抢先建立滩头阵地.逐渐成熟的香港都会经济区有着"一国两制"的特殊地缘政治和制度优势,因而,在亚洲各竞争中的经济区域中,它是建设亚洲首个、也将是最大的GTP的最佳区位.GTP的建成运作可以提升该都会经济区的总体竞争力,加快其经济重构的步伐.结合区内的其它4个机场,珠海机场有条件发展成为GTP.然而,GTP的建设需要有关机场与地方政府间在关税、制空权、后勤服务以及水陆交通等方面进行协调,这将对该都会经济区的内部合作提出更新的挑战.     

Measurement of the intrinsic process zone in rock using acoustic emission

Laboratory specimens with a smooth boundary (no notch) were fabricated from four different rock types (grain sizes from 0.1–10 mm) and were tested in three-point bending. The locations of acoustic emission that occurred around peak load were used to characterize the dimensions of the region of localized microcracking, the so-called intrinsic process zone. The size of this zone was found to vary significantly between the rock types, but was not found to vary significantly for different size beams of the same material. An approximately linear relation was found between the width of the intrinsic process zone and the logarithm of the grain size. An explanation of size effect evolves naturally by considering the intrinsic process zone as a material characteristic. Two different models were used to analyze stress at failure. The first treated the intrinsic process zone as a mathematical crack, an infinite stress raiser, from which a K_IC value was calculated. The second model assumed the intrinsic process zone was a cohesive notch, a finite stress raiser, from which the theoretical tensile strength was defined. The second method seemed somewhat better at predicting size effect on nominal peak stress.     

Trace-metal concentrations in normal human liver: methods to cope with marked variability

Concentrations of trace elements in human tissues characteristically vary widely, and the distributions of most concentrations are skewed to the right. Examination of some of the factors which contribute to the marked variability and skewness of the concentrations revealed that: (1) distributions of concentrations are satisfactorily normal (Gaussian) after logarithmic transformation, (2) ash weight is the best frame of reference in which to report results, (3) the distributions of metal concentrations are not further normalized by adjustments which assume that tissue lipid or collagen contains a fixed fraction of the metal found in the parenchyma, and (4) the choice of sample site within the liver is of minimal significance.