乙烯直接氧化合成乙酸

用常规固定床反应器考察了Pd-SiW12/SiO2催化剂还原条件对乙烯直接氧化合成乙酸催化性能的影响。催化剂用H2在200－300℃还原后Pd 的分散度较高，其催化活性远高于肼在液相中还原的催化剂，在乙烯气相氧化合成乙酸反应的原料气中，适量1，2－二氯乙烷的存在有助于提高乙酸的选择性和时空产率，初步考察了Pd-Se-SiW12/SiO2催化剂连续206h运转的稳定性，结果表明，催化剂中Pd晶粒的长大和硅钨酸的流失是造成催化剂失活的主要原因。     

激光焊接超细基胎体金刚石薄壁钻

采用激光焊接超细预合金粉胎体，开发了新的薄壁钻产品，通过对与现有的产品工艺、性能测试以及实际使用分析对比，结果表明：激光焊接与普通钎焊相比结合强度提高2－3倍，克服了胎体脱落问题，胎体耐磨性提高了50％－120％，其中轴向磨损速率提高1．2倍；钻削速度提高30．4％，工矿适应性增加，使用寿命提高25％－108％。     

柘溪水库泥沙淤积情况调查简介

通过对 1995年柘溪水库泥沙冲淤调查资料的分析 ,对比 196 3年建库时及 1974年库区泥沙冲淤情况 ,获得建库以来库区泥沙沉积率及其泥沙分布的关系曲线 ,可为已建或拟建的同类泥沙淤积分析提供参考。     

品种和加工方式对双低菜粕有效能和氨基酸有效性的影响_注

用精确饲喂技术评价了 3个品种的中国双低油菜和 1个加拿大卡诺拉的脱脂种籽和商品饼粕的能量和氨基酸的有效性。结果表明 ,4个脱脂种籽的氮校正真代谢能和氨基酸真消化率没有差异 (P >0 .0 5 ) ;而 4个商品饼粕的脱脂样品的氮校正真代谢能和氨基酸真消化率有极显著或显著差异。研究结果证实 ,不适当的加工方式不仅降低了氨基酸的有效性 ,而且影响家禽对能量的利用效率。     

Dislocation configurations in highT c oxide BiSrCaCuO

A study of dislocation configurations in superconducting oxide BiSrCaCuO has been made by transmission electron microscopy. Evidence was found for the presence of dislocation pairs composed of two parallel single dislocations holding together with the same Burgers vectors. The pair can further dissociate into partials, giving rise to a four-fold ribbon. Networks consisting of dislocation pairs were also observed. These phenomena are attributed to the possible ordering of strontium and calcium ions and the existence of some oxygen sheet of the Aurivillius type in the oxide crystal. Schemes to illustrate the configurations are suggested and discussed.     

T型薄壁管节点应力集中系数有限元分析

通过有限元的方法,分析了T型薄壁管节点受平面内弯矩作用下的疲劳行为,得到了应力最大值的位置和拟合出用于预测T型薄壁管节点受平面内弯矩作用下的应力集中系数的参数公式。     

基于自组织神经网络的实时统计特征抽取方法

应用人工神经网络讨论统计了特征抽取的原理，提出了相应的抽取方法。该方法具有实时性，容错性，高数据压缩率和良好的特征分辨率。通过计算机仿真和桥梁索力状态的实例计算分析证实了该技术具有广泛的应用价值。     

Synthesis and characterization of block copolymers from D,L-lactide and poly(tetramethylene ether glycol)

The copolymer from D ,L -lactide and poly(tetramethyene ether glycol) (PTMG) was prepared in bulk with an isotributyl aluminum–water–phosphoric acid complex catalyst as the initiator and characterized by H-NMR, GPC, and DSC. The effects of the temperature and the amount of PTMG on the polymerization rate and the molecular weight of copolymers were studied. The behavior of the degradation and delivery rate of Levonorgestrel microspheres in vitro was observed. The results show that the degradation and the delivery rate can be controlled by adjusting the molar rate of hydrophilic and hydrophobic segments of the copolymer © 1995 John Wiley & Sons, Inc.