Analysis of corrosion behavior of LY12 in sodium chloride solution with wavelet transform technique

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｓｔｕｄｙｏｆｓｐｏｎｔａｎｅｏｕｓｃｕｒｒｅｎｔｏｒｐｏｔｅｎｔｉａｌｆｌｕｃ ｔｕａｔｉｏｎｓ,ｗｈｉｃｈｈａｓｂｅｅｎｄｅｓｉｇｎａｔｅｄａｓｅｌｅｃｔｒｏｃｈｅｍｉｃａｌｎｏｉｓｅ(ＥＮ) ,ｆｏｒｔｈｅｃｈａｒａｃｔｅ     

Preparation and elements analysis of porous fluorescent glasses

A large variety of porous fluorescent glasses were prepared and the concentration of different elements in these glasses was analyzed. The start porous glasses were soaked in a solution containing soluble salts and then heated at 650 ℃ for 3 h to decompose the salts in the pores into oxides. Fluorescent agents, such as UO3, Eu203, were impregnated into the porous glasses to prepare the fluorescent glasses. The results show that soaking is a feasible method to prepare the glass sphere with compositions distinguishable from each other and easy to be located in a complicated background. Six or more components can be impregnated together into one glass sample and the concentration of them can be analyzed accurately. UO3 and Eu203 can be impregnated into porous glass to make the glass strongly fluorescent. Higher concentration of Eu203 produces stronger fluorescence while higher concentration of UO3 reduces the fluorescence intensity because of the concentration quenching effect.     

动力学仿真软件在1LB─240型水平摆式犁油缸运动选型中的应用研究

以1LB-240型水平摆式犁中用于犁体换向的油缸设计为例,首先对其在田间的工作状况进行运动学、动力学分析,然后应用机械三维设计软件SolidW orks及内嵌其中的动力学仿真软件DDM对其仿真,找出了犁耕作业过程中油缸的恰当运动方式———匀速运动,为农业机械产品的设计开发提供了一条新的思路。     

溶胶-凝胶法制备ZAO薄膜研究

研究了用溶胶．凝胶法制备ZAO薄膜的工艺、掺杂及其显微结构。用六水合氯化铝在溶胶中引入Al2O3。掺杂Al的含量为1％，3％，6％和9％。用浸涂法在石英玻璃基片上浸涂ZnAO薄膜，研究了热处理、掺杂对ZAO薄膜相组成和显微结构的影响。X射线衍射结果表明，衍射图谱中无Al2O3的衍射峰。随着掺杂量的变化，ZnO主要衍射峰的位置、晶面间距均发生了有规律的变化，说明Al掺杂进了ZnO晶格中。研究结果表明，溶胶浓度、Al掺杂量、热处理温度都影响薄膜的显微结构。当薄膜厚度较大时，热处理过程中ZnO晶粒呈现明显的择优生长现象。     

The design and test of dual/triple‐mode bandpass filter based on temporal coupled‐mode theory

In this article, the design and test of both a K‐band dual‐mode bandpass filter (BPF) pair and a K‐band triple‐mode BPF are presented based on N‐mode temporal coupled‐mode theory (CMT). The expressions of transmission and reflection responses are analytically derived. All the parameters in the expressions have clear physical meanings and are easily optimized to reach the required filter performance. Aided by eigenmode simulations, concrete structures of the three integrated BPFs are designed and optimized to approach the calculated physical parameters. After the fabrications and measurements of the three BPFs, extended upper/lower stopband with high stopband rejections are achieved, and by increasing the number of resonant modes, improved frequency selectivity and better passband flatness are obtained. The analytical analysis well predicts the simulation and measurement results, which provides an efficient way for BPF designs. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:609–622, 2016.     

盲源分离技术及其发展

盲源信号分离是一种功能强大的信号处理方法,在生物医学信号处理、阵列信号处理、语音识别、图像处理及移动通信等领域得到了广泛的应用.简要介绍了盲源分离的数学模型、可实现性、可解的假设条件及算法,综述了盲源分离的发展及研究现状,提出了其未来的发展方向.     

I2C总线在指纹识别系统键盘显示中的应用

针对大多数嵌入式系统键盘显示电路复杂、不灵活、维护困难等问题,结合指纹识别系统在汽车安全领域的应用,介绍了基于I2C总线的数码管显示驱动和键盘扫描控制芯片CH452S以及扩展口器件PCF8574AP在指纹识别系统键盘显示接口中的应用,包括硬件电路连接和软件程序设计.采用I2C总线,不仅占用端口资源少,电路结构简单,而且易于电路扩展与系统升级.     

基于FSVM光伏系统最大功率跟踪算法及仿真研究

针对光伏组件中常用的最大功率跟踪方法存在的不足,提出并建立了模糊支持向量机(FSVM)的最大功率点工作电压预测模型.通过对实测气象光强数据进行的仿真分析表明,与BP神经网络模型相比,FSVM的模型实现了结构风险最小化原则,对未来的样本有较好的泛化能力,具有更高的预测精度和稳定性.     

C8051F单片机在自动机器人上的应用

以2007年CCTV大学生机器人大赛自动机器人为对象,系统阐述了自动机器人的控制电路.     

癸酸-正辛酸低温相变材料的制备和循环性能

本文研制了一种用于相变温度在0~5℃的冷藏运输系统的二元有机复合相变蓄冷材料。该材料由癸酸和辛酸按比例混合经超声波振荡后制得,质量配比为30∶70。通过步冷曲线法测定了不同质量配比的癸酸-正辛酸溶液的相变温度,利用相图确定了二元低共熔共晶点,此时的质量配比为30∶70。经差示扫描量热仪(DSC)测得共晶溶液的相变温度为1.5℃,相变潜热为120.6 J/g。癸酸-正辛酸共晶混合物经过30次、60次结晶与熔化循环后,相变温度、相变潜热均未发生明显变化。测试结果表明,该相变蓄冷材料具有合适的相变温度、较高的相变潜热和良好的循环热稳定性,在蓄冷系统尤其是冷藏运输系统中有着很大的应用潜力。