Drug-Free Nasal Spray as a Barrier against SARS-CoV-2 and Its Delta Variant: In Vitro Study of Safety and Efficacy in Human Nasal Airway Epithelia

The nasal epithelium is a key portal for infection by respiratory viruses such as SARS-CoV-2 and represents an important target for prophylactic and therapeutic interventions. In the present study, we test the safety and efficacy of a newly developed nasal spray (AM-301, marketed as Bentrio) against infection by SARS-CoV-2 and its Delta variant on an in vitro 3D-model of the primary human nasal airway epithelium. Safety was assessed in assays for tight junction integrity, cytotoxicity and cilia beating frequency. Efficacy against SARS-CoV-2 infection was evaluated in pre-viral load and post-viral load application on airway epithelium. No toxic effects of AM-301 on the nasal epithelium were found. Prophylactic treatment with AM-301 significantly reduced viral titer vs. controls over 4 days, reaching a maximum reduction of 99% in case of infection from the wild-type SARS-CoV-2 variant and more than 83% in case of the Delta variant. When AM-301 administration was started 24 h after infection, viral titer was reduced by about 12-folds and 3-folds on Day 4. The results suggest that AM-301 is safe and significantly decelerates SARS-CoV-2 replication in cell culture inhibition assays of prophylaxis (pre-viral load application) and mitigation (post-viral load application). Its physical (non-pharmaceutical) mechanism of action, safety and efficacy warrant additional investigations both in vitro and in vivo for safety and efficacy against a broad spectrum of airborne viruses and allergens.     

Characterization of Extra Virgin Olive Oil from Southern Brazil

Six olive oils extracted from the cultivars Arbequina, Arbosana, Coratina, Frantoio, Koroneiki, and Picual from 2017 and 2018 harvests, cultivated in Pinheiro Machado, Rio Grande do Sul, Brazil, are evaluated for standard oil composition parameters and bioactive constituents (pigments, tocopherols, and phenolic compounds). Multivariate principal component analysis (PCA) and univariate ANOVA and Fisher's LSD test are used to verify the effect of cultivar and harvest year on oil composition. Olive oil composition met extra virgin olive oil (EVOO) standard parameters and is influenced by both cultivar and harvest year. EVOO produced in 2018 has greater chlorophyll, caffeic acid, ligstroside aglycone, hydroxyoleuropein aglycone, syringic acid, and hydroxytyrosol acetate contents than the EVOOs from 2017. Linoleic acid, ferulic acid, ligstroside aglycone, and hydroxytyrosol acetate are the variables whose contents most contributed to the differentiation of oils by cultivar in both harvest years. Chemical characterization analyses allow for the differentiation of oil composition based on harvest year and cultivar. Metabolic quality data obtained here support the establishment of a local EVOO profile and the compounds that most contributed to treatment differentiation may serve as markers that can be utilized in determining origin, cultivar, and harvest year. Practical Applications: Olive production in Brazil is recent and is based on European cultivars which have not been bred for the local environmental conditions. Therefore, the measurement of olive oil metabolic quality will determine cultivar adaptability to local edaphoclimatic conditions as well as assist in the establishment of a standard of identity for the product and promote the development of its market. Olive oil produced in Southern Brazil shows high quality, and is especially rich in phenolic compounds. Although harvest year influences oil composition, oil from both harvests meet EVOO standards and cultivar specific metabolic markers are observed. This study provides the foundation for olive producers in Southern Brazil to seek authentication of the geographical origin of olive oil.     

Platinum(II) Complexes Bearing Triphenylphosphine and Chelating Oximes: Antiproliferative Effect and Biological Profile in Resistant Cells

Platinum(II) complexes of the type [Pt(Cl)(PPh₃){(κ²-N,O)-(1{C(R)=N(OH)-2(O)C₆H₄})}] with R=Me, H, ( 1 and 2 ) were synthesized and characterized. Single-crystal X-ray diffraction confirmed the proposed (SP4-3) configuration for 1 . Study of the antiproliferative activity, performed on a panel of human tumor cell lines and on mesothelial cells, highlighted complex 2 as the more effective. In particular, it showed a remarkable cytotoxicity in ovarian carcinoma cells (A2780) and interestingly, a significant antiproliferative effect on cisplatin resistant cells (A2780cis). Investigation into the intracellular mechanism of action demonstrated that 2 had a lower ability to platinate DNA than did cisplatin, which was taken as reference, and a notably higher uptake in resistant cells. A significant accumulation in mitochondria, along with the ability to induce concentration-dependent mitochondrial membrane depolarization and intracellular reactive oxygen species production, allowed us to propose a mitochondrion-mediated pathway as responsible for the interesting cytotoxic profile of complex 2 .     

α-Triazolylboronic Acids: A Promising Scaffold for Effective Inhibitors of KPCs

Boronic acids are known reversible covalent inhibitors of serine β-lactamases. The selectivity and high potency of specific boronates bearing an amide side chain that mimics the β-lactam's amide side chain have been advanced in several studies. Herein, we describe a new class of boronic acids in which the amide group is replaced by a bioisostere triazole. The boronic acids were obtained in a two-step synthesis that relies on the solid and versatile copper-catalyzed azide–alkyne cycloaddition (CuAAC) followed by boronate deprotection. All of the compounds show very good inhibition of the Klebsiella pneumoniae carbapenemase KPC-2, with K_i values ranging from 1 nM to 1 μM, and most of them are able to restore cefepime activity against K. pneumoniae harboring bla_KPC-2. In particular, compound 1 e , bearing a sulfonamide substituted by a thiophene ring, proved to be an excellent KPC-2 inhibitor (K_i=30 nM); it restored cefepime susceptibility in KPC-Kpn cells (MIC=0.5 μg/mL) with values similar to that of vaborbactam (K_i=20 nM, MIC in KPC-Kpn 0.5 μg/mL). Our findings suggest that α-triazolylboronates might represent an effective scaffold for the treatment of KPC-mediated infections.     

Mixture design applied for the development of films based on starch,polyvinyl alcohol,and glycerol

Starch and polyvinyl alcohol (PVA) are biodegradable materials with potentiality to replace the conventional polymers in some applications. The aim of this work was to produce biodegradable films of PVA, cassava starch, and glycerol by thermoplastic extrusion using a mixture design to evaluate the effects of each component in the blend properties. Six formulations were prepared using a twin‐screw extruder coupled with a calender. All the materials were visually homogeneous and presented good processability. Mechanical properties were dependent on both the relative humidity conditioning and the formulation; higher relative humidities detracted the mechanical properties, which was associated to plasticizer effect of the water. Furthermore, the mechanical properties were better when higher concentrations of PVA were used, resulting in films with lower opacity, lower water vapor permeability, and higher thermal stability, according to TGA. Biodegradable materials based on starch, PVA, and glycerol have adequate mechanical and processing properties for commercial production. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42697.     

Promising curaua fiber‐reinforced polyester composite for high‐impact ballistic multilayered armor

A typical multilayered armor system (MAS) is composed of a harder front ceramic tile, which is able to erode heavy ammunition, such as the 7.62 mm bullet, followed by a second layer to further reduce the impact energy. Aramid fabric is a common choice for the second layer. In the present work, polyester matrix composites reinforced with 10 to 30 vol% of curaua fibers, despite having much lower strength and stiffness than aramid fabric, displayed similar trauma indentation in a standard clay witness simulating the human body. Impedance matching and scanning electron microscopy analyses suggest effective energy absorption through ceramic fragment capture by curaua composites. Additionally, because of the high cost of aramid fabric, a full MAS with curaua fiber composite is much cheaper than a MAS composed of aramid fabric. Taking into consideration, both the economical and environmental advantages of natural fibers, it is concluded that curaua fiber‐reinforced polyester composite could replace aramid fabric as the second layer in MASs for personal ballistic protection. POLYM. ENG. SCI., 57:947–954, 2017. © 2016 Society of Plastics Engineers     

Evaluation of tritium diffusion through the Neutral Beam Injector calorimeter panel

The Neutral Beam Test Facility (NBTF) to be realized in Padoa will test the Neutral Beam Injection (NBI), one of the Heating and Current Drive Systems foreseen for ITER. The NBI is based on the acceleration of hydrogen or deuterium negative ions up to 1 MeV. This work has been aimed at assessing the tritium release from the NBTF in order to provide data for the safety analysis. In particular, the diffusion of the tritium through the neutral beam target material (the CuCrZr alloy calorimeter panels) has been assessed by using literature data of the diffusion coefficient. The tritium generated inside the calorimeter panels moves into both the vacuum and water side: the tritium diffusion flux has been evaluated during the beam-on (200 °C) and the beam-off (20 °C) phases of the NBTF experiments consisting of an interim campaign and a final test. The penetration depth of the tritium through the 2 mm thick CuCrZr alloy material has been also evaluated by using a Monte-Carlo code. As main result, the assessed diffusion flux of tritium during both the beam-on and the beam-off phases are modest. In fact, at the end of the interim campaign (100 days), about the 96% of the all generated tritium (626.5 MBq) exits the calorimeter while the residual tritium inventory (25 MBq) leaves the copper alloy with a diffusion time of about 1 month. At the end of the final test (14 days) about the 99% of the total generated tritium (1.023 × 10⁴ MBq) leaves the copper alloy and the remaining tritium inventory (152.2 MBq) is released by about 32 days. In both the interim campaign and the final test, more than the 99% of the total tritium is transferred into the vacuum side of the calorimeter panel while negligible tritium amounts enter the cooling water system thus showing a very low impact on the environment.     

Effect of Vacuum and Modified Atmosphere Packaging on the Shelf-life of Liquid-smoked Swordfish (Xiphias gladius) Slices

ABSTRACT: Swordfish fillets, dry-salted and treated with liquid smoke, were sliced and packed in vacuum conditions and under modified atmosphere (MA) (5% O₂,45% CO₂, 50% N₂) and stored at chilled temperature (4°C) to determine the effect of different packaging on shelf-life. Sensory attributes, total volatile basic nitrogen (TVB-N), pH, lipid oxidation by thiobarbituric acid test, and microbiological counts were monitored during 45 d of storage. The TVB-N increased to levels recommended by European regulation at the time of sensory rejection, resulting as the most reliable parameter of quality decay. Lipid oxidation was low and microbial counts could not be correlated with quality decay. Sensory rejection (at least 50% of the assessors scoring =5 in a scale from 1 to 9) was sooner for MA-packed samples (12d) than for vacuum-packed ones (42d).