Promising curaua fiber‐reinforced polyester composite for high‐impact ballistic multilayered armor

A typical multilayered armor system (MAS) is composed of a harder front ceramic tile, which is able to erode heavy ammunition, such as the 7.62 mm bullet, followed by a second layer to further reduce the impact energy. Aramid fabric is a common choice for the second layer. In the present work, polyester matrix composites reinforced with 10 to 30 vol% of curaua fibers, despite having much lower strength and stiffness than aramid fabric, displayed similar trauma indentation in a standard clay witness simulating the human body. Impedance matching and scanning electron microscopy analyses suggest effective energy absorption through ceramic fragment capture by curaua composites. Additionally, because of the high cost of aramid fabric, a full MAS with curaua fiber composite is much cheaper than a MAS composed of aramid fabric. Taking into consideration, both the economical and environmental advantages of natural fibers, it is concluded that curaua fiber‐reinforced polyester composite could replace aramid fabric as the second layer in MASs for personal ballistic protection. POLYM. ENG. SCI., 57:947–954, 2017. © 2016 Society of Plastics Engineers     

Evaluation of tritium diffusion through the Neutral Beam Injector calorimeter panel

The Neutral Beam Test Facility (NBTF) to be realized in Padoa will test the Neutral Beam Injection (NBI), one of the Heating and Current Drive Systems foreseen for ITER. The NBI is based on the acceleration of hydrogen or deuterium negative ions up to 1 MeV. This work has been aimed at assessing the tritium release from the NBTF in order to provide data for the safety analysis. In particular, the diffusion of the tritium through the neutral beam target material (the CuCrZr alloy calorimeter panels) has been assessed by using literature data of the diffusion coefficient. The tritium generated inside the calorimeter panels moves into both the vacuum and water side: the tritium diffusion flux has been evaluated during the beam-on (200 °C) and the beam-off (20 °C) phases of the NBTF experiments consisting of an interim campaign and a final test. The penetration depth of the tritium through the 2 mm thick CuCrZr alloy material has been also evaluated by using a Monte-Carlo code. As main result, the assessed diffusion flux of tritium during both the beam-on and the beam-off phases are modest. In fact, at the end of the interim campaign (100 days), about the 96% of the all generated tritium (626.5 MBq) exits the calorimeter while the residual tritium inventory (25 MBq) leaves the copper alloy with a diffusion time of about 1 month. At the end of the final test (14 days) about the 99% of the total generated tritium (1.023 × 10⁴ MBq) leaves the copper alloy and the remaining tritium inventory (152.2 MBq) is released by about 32 days. In both the interim campaign and the final test, more than the 99% of the total tritium is transferred into the vacuum side of the calorimeter panel while negligible tritium amounts enter the cooling water system thus showing a very low impact on the environment.     

Scheduling links for heavy traffic on interfering routes in wireless mesh networks

We consider wireless mesh networks and the problem of scheduling the links of a given set of routes under the assumption of a heavy-traffic pattern. We assume some TDMA protocol provides a background of synchronized time slots and seek to schedule the routes’ links to maximize the number of packets that get delivered to their destinations per time slot. Our approach is to construct an undirected graph G and to heuristically obtain node multicolorings for G that can be turned into efficient link schedules. In G each node represents a link to be scheduled and the edges are set up to represent every possible interference for any given set of interference assumptions. We present two multicoloring-based heuristics and study their performance through extensive simulations. One of the two heuristics is based on relaxing the notion of a node multicoloring by dynamically exploiting the availability of communication opportunities that would otherwise be wasted. We have found that, as a consequence, its performance is significantly superior to the other’s.     

HCI and education: a blended design experience

Teaching HCI in an undergraduate course for computer scientists is often a challenging experience, because the skills that characterize HCI are different from scientific and computational thinking that are the focus of most subjects of the curriculum. Often HCI teaching is organized as a set of lectures that are useful to learn concepts, but don’t increase the design skills of the students. This work reports the results of an educational experience where both learners and teachers were actively involved in a process of knowledge construction and design. This process usually happens in other domains, such as architecture or industrial design, but is not part of most computer science curricula. We chose as project a challenging theme: the design of eco-feedback interfaces that inform people about the consequences of their actions for the environment and help to take decisions for lowering energy consumption. Eco-feedback interfaces are also representative of the gap between the products available on the market and the results of scientific studies, evidenced also by a recent workshop about HCI education. The workshop evidenced a number of pitfalls in HCI education that in our educational experience we tried to overcome with appropriate methodologies. An additional challenging task was the attempt to organize all the design activities taking advantage of a platform for remote learning, stressing its limits. The paper will discuss all these issues, evidencing where the applied methodologies gave good results and where they need further improvements, with the final goal of giving useful advices for HCI educational experiences to come.     

Age and productivity as determinants of firm survival over the industry life cycle

This paper contributes to fill the gap between the literature on the determinants of firm survival and the empirical works on the industry life cycle (ILC). Using a representative sample of Spanish firms with 10 or more employees over the period 1993–2009, the role played by firm age and productivity in firm survival is empirically analysed across three stages of the life cycle of forty-seven 3-digit manufacturing sectors. In the ‘early’ stage of the ILC, firm age is negatively correlated with hazard rates while firm productivity is not. Firm productivity is associated with lower hazard in the ‘mature’ stage of the ILC, when competition is primarily efficiency-driven, while firm age does not play a significant role for firm survival. In the ‘intermediate’ stage, both age and productivity play a role in reducing firms’ hazard rates.     

Bimorph actuator with monolithically integrated CMOS OFET control

We present an electrostrictive polymer bimorph controllable with low voltage through an integrated CMOS OFET control system. We have actuated the device by applying voltages up to 400 V to the control system, and can actuate the control with 60 V switching. The electrostrictor material was used both as the substrate for the transistors and as the dielectric layer for the control circuitry. This allows for a reduction in the number of layers in the structure, minimizing the clamping effect that would compromise the strain capabilities of the device. We have characterized the macroscopic displacement of the structure through a radius of curvature measurement, ranging from 11.4 mm to 7.5 mm depending on the supply voltage provided. The architecture proposed can be scaled to larger system with higher supply voltages.     

Colour features and pigment composition of Italian carbonic macerated red wines

Thirty commercially available Italian carbonic macerated young red wines, have been analysed by HPLC–DAD–MS with the aim to characterise their pigment composition and find possible correlations with the colour features evaluated by means of spectrophotometric measurements. The composition in anthocyanin monoglucosides, acetates, p-coumarates as well as that in pyranoanthocyanins and direct and ethyl-bridged adducts with flavanols, was studied. Because of the peculiar maceration process, carbonic macerated wines demonstrated to be qualitatively rich in pyranoanthocyanins and pigment adducts. A number of ethyl-bridged anthocyanin isomers was found, together with significant contents of vitisin A and vitisin B (up to 15.5 mg/L as a sum). Malvidin-3-glc-4-vinylphenol was the main pyranoanthocyanin-vinylphenol adduct (up to 1.10 mg/L). The colour features of the wines were broadly distributed as a consequence of the percentage of carbonic macerated wine present in the marketed product. The statistical treatment of the entire data set revealed that pyranoanthocyanins are positively correlated with colour density (while no correlation was found for monoglucosides) and that direct adducts and/or ethyl-bridged compounds can play a role for what concerns the hue of carbonic macerated wines.     

Linux real-time framework for fusion devices

A new framework for the development and execution of real-time codes is currently being developed and commissioned at JET. The foundations of the system are Linux, the Real Time Application Interface (RTAI) and a wise exploitation of the new i386 multi-core processors technology.The driving motivation was the need to find a real-time operating system for the i386 platform able to satisfy JET Vertical Stabilisation Enhancement project requirements: 50 μs cycle time. Even if the initial choice was the VxWorks operating system, it was decided to explore an open source alternative, mostly because of the costs involved in the commercial product.The work started with the definition of a precise set of requirements and milestones to achieve: Linux distribution and kernel versions to be used for the real-time operating system; complete characterization of the Linux/RTAI real-time capabilities; exploitation of the multi-core technology; implementation of all the required and missing features; commissioning of the system.Latency and jitter measurements were compared for Linux and RTAI in both user and kernel-space. The best results were attained using the RTAI kernel solution where the time to reschedule a real-time task after an external interrupt is of 2.35 ± 0.35 μs. In order to run the real-time codes in the kernel-space, a solution to provide user-space functionalities to the kernel modules had to be designed. This novel work provided the most common functions from the standard C library and transparent interaction with files and sockets to the kernel real-time modules. Kernel C++ support was also tested, further developed and integrated in the framework.The work has produced very convincing results so far: complete isolation of the processors assigned to real-time from the Linux non real-time activities, high level of stability over several days of benchmarking operations and values well below 3 μs for task rescheduling after external interrupt. From being the alternative option, RTAI has been finally chosen as the platform for the project. A first stable version of the framework has been integrated on the JET system and is already being commissioned. It will be soon be used on the Vertical Stabilisation Enhancement for the Plasma Control Upgrade (PCU) project at JET.