Adaptive beamforming for high-frequency over-the-horizon passive radar

Target detection and tracking systems using emitters of opportunity have received significant interest recently, especially those which exploit VHF and UHF broadcasts as signal sources in so-called passive radar systems. Here, the authors discuss an experimental system in the high-frequency (HF) band, where due to long-distance ionospheric propagation of radio waves in the 3?30 MHz spectrum, the illuminator may be located well beyond the line-of-sight. In this study, live data was recorded by a high dynamic range multichannel digital receiver connected to a two-dimensional (L-shaped) antenna array, and signals from an uncooperative HF over-the-horizon (OTH) radar transmitter have been captured and analysed. As a preliminary step towards the development of a general HF-OTH passive radar system, the scope of this work is to compare the performance of conventional and adaptive spatial processing techniques in terms of their ability to cancel direct-wave interference and protect useful signal echoes to detect a small cooperative aircraft target. In particular, an alternative adaptive beamforming method specifically tailored to this application is proposed, and its practical performance is compared with classical and standard adaptive beamforming approaches. GPS data measured on-board the cooperative aircraft provided accurate ground truth of the flight path, enabling target profiles in bi-static range, Doppler frequency and direction-of-arrival (azimuth/elevation) to be calculated as a function of time. This information permitted the different processing schemes to be evaluated with a high degree of confidence. The experimental system and live data analysed are exclusively from the HF Radar program of the Defence Science and Technology Organisation (DSTO), Australia.     

Effect of short carbon fibers and MWCNTs on microwave absorbing properties of polyester composites containing nickel-coated carbon fibers

Multiphase composite materials filled with multiwall carbon nanotubes (MWCNTs), short nickel-coated carbon fibers and millimeter-long carbon fibers with various weight fractions and compositions are developed and used for the design of wide-band thin radar-absorbing screens. The effective complex permittivity of several composite samples is measured in the frequency range from 8 GHz to 18 GHz. The obtained results show that the addition of the MWCNTs into the mixture allows tuning the EM properties of the composite filled with the short nickel-coated fibers. Numerical simulations are also performed in order to design new radar-absorbing shields. Single-layer and bi-layer thin dielectric Salisbury screens are designed to exhibit minimum reflection coefficient at 10 GHz and at 15 GHz, and maximum bandwidth at −10 dB. It results that the total thickness of the screen can be reduced below 2 mm by using a lossy sheet made with the composite filled with MWCNTs and nickel-coated carbon fibers, whereas the bandwidth at −10 dB can exceed 6 GHz in a bi-layer structure.     

Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: A literature review

In recent years, natural fibres are increasingly used as reinforcements for the production of low-cost and lightweight polymer composites: other advantages include non-abrasive nature, high specific properties, and biodegradability. However, their limitations, including moisture absorption, poor wettability and large scattering in mechanical properties, and the not sufficient understanding of mechanisms controlling their mechanical behaviour and failure modes, still confine the use of natural fibre reinforced composites in non-structural applications. Acoustic emission (AE) proved useful for its capability of real-time monitoring over the whole material volume and high sensitivity to any process generating stress waves.This paper presents a literature review of AE applications in studies on natural fibre composites. The following fields of application are covered: (1) interface studies in single fibre composite (SFC) tests, (2) damage evolution and failure mechanisms detection and (3) crack propagation, including also current limitations of existing literature and future work.     

In search of a reliable technique for the determination of the biological stability of the organic matter in the mechanical-biological treated waste

The biological stability determines the extent to which readily biodegradable organic matter has decomposed. In this work, a massive estimation of indices suitable for the measurement of biological stability of the organic matter content in solid waste samples has been carried out. Samples from different stages in a mechanical-biological treatment (MBT) plant treating municipal solid wastes (MSW) were selected as examples of different stages of organic matter stability in waste biological treatment. Aerobic indices based on respiration techniques properly reflected the process of organic matter biodegradation. Static and dynamic respirometry showed similar values in terms of aerobic biological activity (expressed as oxygen uptake rate, OUR), whereas cumulative oxygen consumption was a reliable method to express the biological stability of organic matter in solid samples. Methods based on OUR and cumulative oxygen consumption were positively correlated. Anaerobic methods based on biogas production (BP) tests also reflected well the degree of biological stability, although significant differences were found in solid and liquid BP assays. A significant correlation was found between cumulative oxygen consumption and ultimate biogas production. The results obtained in this study can be a basis for the quantitative measurement of the efficiency in the stabilization of organic matter in waste treatment plants, including MBT plants, anaerobic digestion of MSW and composting plants.     

一总线在北京谱仪实验模型BESⅢ Slow Control中的应用

介绍了北京正负电子对撞机国家重点工程中,BESⅢ Slow Control在全新北京谱仪中的重要性,并对通过在三个探测器：Muon RPC、量能器EMC、漂移室MDC实验模型中的具体实例应用,介绍了慢控制主要采用的一总线技术。     

Understanding the dynamic behaviour of middle-vessel continuous distillation columns

The fundamental dynamic behaviour of a middle-vessel continuous distillation column is studied in this paper. The interaction between the middle vessel (MV) design and control parameters is identified by means of a linear analysis. Transfer functions relating the dynamics of the product composition responses to changes in the disturbance inputs and manipulated inputs are derived. The role of the MV holdup and MV level controller gain in altering the product composition responses is identified. It is shown that the MV level controller gain can significantly affect the control performance when feed flow disturbances must be compensated for. However, it has a much lower impact in the control performance when feed composition disturbances need to be rejected; in this case, exploiting the “buffering” effect of the MV is more important for control. The analysis is carried out in detail for a LV control configuration, and is subsequently extended to an “on-demand” DB configuration. Finally, simple guidelines for the choice of the MV level controller gain and MV holdup are provided.     

Validation of a 1-Day Analytical Diagnostic Real-Time PCR for the Detection of Salmonella in Different Food Meat Categories

Foodborne disease caused by Salmonella represents a worldwide public health problem. In Europe, salmonellosis is still the second most commonly recorded zoonosis. Since the standard culture method for detecting Salmonella (ISO 6579:2002) requires up to 5 days to produce results, the need to develop rapid methods represents an important issue for the authorities and the producers. The aim of the present study was the in-house validation, according to ISO 16140, of an open-formula diagnostic real-time PCR for the detection of Salmonella in all the different meat categories reported in the EU Regulations relative to microbiological criteria for food safety. The assay employed specific primers and a probe target within the ttrRSBCA locus, which allows the tetrathionate respiration in Salmonella. Selectivity, relative accuracy, relative sensitivity and relative specificity were established by testing 110 bacterial strains and 175 various edible meat samples. Results showed 100 % selectivity, 100 % relative accuracy, 100 % relative sensitivity and 100 % relative specificity of the real-time PCR when compared to the standard culture method used as reference. In addition, in order to minimize the effect of the competitive micro-flora naturally present on meat samples, a highly nutritious and selective commercial medium (ONE Broth Salmonella, Oxoid) was evaluated in comparison with the classical non-selective pre-enrichment broth (buffered peptone water). Results demonstrated that the ONE Broth Salmonella medium increases the growth of Salmonella in the presence of competitive micro-flora.     

New Insights on Plant Cell Elongation: A Role for Acetylcholine

We investigated the effect of auxin and acetylcholine on the expression of the tomato expansin gene LeEXPA2, a specific expansin gene expressed in elongating tomato hypocotyl segments. Since auxin interferes with clathrin-mediated endocytosis, in order to regulate cellular and developmental responses we produced protoplasts from tomato elongating hypocotyls and followed the endocytotic marker, FM4-64, internalization in response to treatments. Tomato protoplasts were observed during auxin and acetylcholine treatments after transient expression of chimerical markers of volume-control related compartments such as vacuoles. Here we describe the contribution of auxin and acetylcholine to LeEXPA2 expression regulation and we support the hypothesis that a possible subcellular target of acetylcholine signal is the vesicular transport, shedding some light on the characterization of this small molecule as local mediator in the plant physiological response.     

Detection of frozen salt in pipes using gamma-ray spectrometry of potassium self-activity

Solar plants that use molten salts as heat transfer fluid need careful control to avoid the freezing of the salt in the pipes; if such a problem occurs, a diagnostic instrument to localize where is the frozen salt plug and to determine its length is useful. If the salt contains potassium (as is the case of the most common mixture used in solar plants, NaNO₃/KNO₃ 60/40% by weight), the gamma decay of the natural unstable isotope ⁴⁰K can be exploited to detect the frozen salt in a non-invasive way. Simulations and experimental results regarding the detectability of such plugs with different masses/lengths are presented.