PdAg/alumina membranes prepared by high power impulse magnetron sputtering for hydrogen separation

The development of hydrogen purification membranes that meet market demands such as high purity, dynamic hydrogen production even at small scale, and reduced costs is still an open question. With this view, the present study aims at developing, for the first time, a method based on high power impulse magnetron sputtering for the deposition of Pd77Ag23 (wt%) films onto porous alumina substrates to achieve composite membranes with high hydrogen permeability and stability. This technique allows the deposition of films also on complex geometries and can be easily scaled up, thus making this technology a potential candidate for preparing high performing membranes. Membranes made by stable and porous alumina supports and metallic, dense and crystalline Pd₇₇Ag₂₃ layers, from 3.5 μm to 17 μm thick, have been prepared and tested. The membranes showed good hydrogen permeability values, showing flux values up to a maximum of 0.62 mol_H2 m^?2 s^?1 at 450 °C and ΔP of 300 kPa. The resistance to hydrogen embrittlement and the chemical inertness to syngas were also demonstrated.     

Porcine Small Intestinal Submucosa (SIS) as a Suitable Scaffold for the Creation of a Tissue-Engineered Urinary Conduit: Decellularization,Biomechanical and Biocompatibility Characterization Using New Approaches

Bladder cancer (BC) is among the most common malignancies in the world and a relevant cause of cancer mortality. BC is one of the most frequent causes for bladder removal through radical cystectomy, the gold-standard treatment for localized muscle-invasive and some cases of high-risk, non-muscle-invasive bladder cancer. In order to restore urinary functionality, an autologous intestinal segment has to be used to create a urinary diversion. However, several complications are associated with bowel-tract removal, affecting patients’ quality of life. The present study project aims to develop a bio-engineered material to simplify this surgical procedure, avoiding related surgical complications and improving patients’ quality of life. The main novelty of such a therapeutic approach is the decellularization of a porcine small intestinal submucosa (SIS) conduit to replace the autologous intestinal segment currently used as urinary diversion after radical cystectomy, while avoiding an immune rejection. Here, we performed a preliminary evaluation of this acellular product by developing a novel decellularization process based on an environmentally friendly, mild detergent, i.e., Tergitol, to replace the recently declared toxic Triton X-100. Treatment efficacy was evaluated through histology, DNA, hydroxyproline and elastin quantification, mechanical and insufflation tests, two-photon microscopy, FTIR analysis, and cytocompatibility tests. The optimized decellularization protocol is effective in removing cells, including DNA content, from the porcine SIS, while preserving the integrity of the extracellular matrix despite an increase in stiffness. An effective sterilization protocol was found, and cytocompatibility of treated SIS was demonstrated from day 1 to day 7, during which human fibroblasts were able to increase in number and strongly organize along tissue fibres. Taken together, this in vitro study suggests that SIS is a suitable candidate for use in urinary diversions in place of autologous intestinal segments, considering the optimal results of decellularization and cell proliferation. Further efforts should be undertaken in order to improve SIS conduit patency and impermeability to realize a future viable substitute.     

The territorial and landscape impacts of photovoltaic systems: Definition of impacts and assessment of the glare risk

The installation and operation of systems that exploit solar energy through photovoltaic conversion, recently promoted in some European countries by new sell-back tariffs, is a relevant transformation of the territory for various reasons (land use, elimination of the existing vegetation, visual impact on the components of the landscape, microclimate change, glare from the reflection of the direct sunlight). The weak energy intensity of the solar source coupled with the low conversion efficiency of the photovoltaic cells, make the physical dimensions of such systems relevant and, with them, also the environmental, territorial and landscape impacts that basically depend on the physical extent of the system. If it is well known that an incentive to the exploitation of renewable sources is one of the features of the policy of land conservation, including the one of the protected areas, at the same time the concerns of local communities and governments about the environmental, territorial and landscape impacts of this technology are increasing rapidly.Given this picture, this work is intended to clarify the territorial impacts of the ground mounted photovoltaic systems. Later, the paper concentrates on a specific impact, which is the assessment of the risk of glare by reflection of direct sunlight from the surfaces of photovoltaic modules. The methodologies that can be used to assess this impact and the outcomes of an evaluation carried out for a 5000 m² PV system currently designed on a hilly territory in Italy are presented.     

Detection of frozen salt in pipes using gamma-ray spectrometry of potassium self-activity

Solar plants that use molten salts as heat transfer fluid need careful control to avoid the freezing of the salt in the pipes; if such a problem occurs, a diagnostic instrument to localize where is the frozen salt plug and to determine its length is useful. If the salt contains potassium (as is the case of the most common mixture used in solar plants, NaNO₃/KNO₃ 60/40% by weight), the gamma decay of the natural unstable isotope ⁴⁰K can be exploited to detect the frozen salt in a non-invasive way. Simulations and experimental results regarding the detectability of such plugs with different masses/lengths are presented.     

On the Delay of a CNTFET with Undeposited CNTs by Gate Width Adjustment

This paper deals with the performance of a Carbon Nano Tube Field Effect Transistor (CNTFET) in the presence of undeposited CNTs as defects. A simulation-based analysis of delay degradation due to different features (such as chirality and defective CNT distribution) is initially pursued. Two solutions to mitigate the change in delay are proposed; these approaches are based on adjusting the gate width of the CNTFET by lithography (and removing CNTs) as part of the fabrication process. These two methods reduce the average delay and its deviation, respectively. A probabilistic delay analysis is then presented. The performance of the proposed two adjustment methods is evaluated by considering CNT features (such as chirality and defect distribution) deterministically and probabilistically. By deterministic (probabilistic) simulation, the first method reduces on average the delay by 6.968 % (7.811 %) while the deviation is increased (decreased) by 32.444 % (9.788 %). The second method reduces deterministically (probabilistically) on average the deviation by 44.159 % (47.476 %) with 2.166 % (4.409 %) delay reduction.     

An Adaptive Control System to Deliver Interactive Virtual Environment Content to Handheld Devices

Wireless communication advances have enabled emerging video streaming applications to mobile handheld devices. For example, it is possible to display and interact with complex 3D virtual environments on mobile devices that don’t have enough computational and storage capabilities (e.g. smart phones, PDAs) through remote rendering techniques, where a server renders 3D data and streams the corresponding image flow to the client. However, due to fluctuations in bandwidth characteristics and limited mobile device CPU capabilities, it is extremely challenging to design effective systems for streaming interactive multimedia over wireless networks. This paper presents a novel approach based on a controller that can automatically adjust streaming parameters basing on feedback measures from the client device. Experimental results prove the effectiveness of the proposed solution in coping with bandwidth changes, thus providing high Quality of Service (QoS) in remote visualizations.